Great video, I am new to Nano and I was able to follow every step, including IIS. I do have one question: What version of Nano am I running out of Server 2016?
@YOUASHPAKMULANI
6 жыл бұрын
Excellent!!!! Thanks a lot for such a valuable knowledge with easy to understand steps - that too for free :) I have bought lots of paid videos for the same, but your videos are at the top and easy to understand. Keep it up.
@NLBSolutions
6 жыл бұрын
Tank you Ashpak! Your comment means a lot to me!
@robinvo5279
7 жыл бұрын
Hi Nick, at 10:25, on my side, I am not able to enter the numbers for IP Address, Subnet Mask, or Default Gateway. It's not because of the Num Lock. Do you have any idea? I am able to input characters like "hhh", but not "192..."
@NLBSolutions
7 жыл бұрын
Hi Robin, this is a thing I haven't encountered. You can try with numbers above the letters.
@touhid69
3 жыл бұрын
How do you create client virtual machine ? is this same way as domain controller ? I think you may be omit some steps before going for nano server. a diagram would be helpful to understand the screnario
@theresioleefland1737
5 жыл бұрын
@nlb solutions ive follow all ure steps and evertying went good until the part where u put a command in the powershell after u set the "set-item.." command. what is the exact command u use for "$ip?? cause i cant get to remote powershell my nano server. thanx in advancce
@Doogiehowsy
6 жыл бұрын
In school and Lab environment we used Hyper-V but wasn't the one who configured them originally. I was pretty much using Hyper-V for everything, Domain controller and clients and even separate servers to run DHCP alone. Here is where I'm confused, after installing Windows Server in the videos you created a Domain and forest.... then we see you using hyper-V to create other servers (I pretty much thought Hyper-v was Windows server), my question is why wasn't the Domain Controller you created in the previous videos showing up in Hyper-V? Did you install the windows server application (which affect your PC and Kernel) and just using Hyper-V for virtualization and test? I'm seriously confused.
@MrYounis26
2 жыл бұрын
Same here, a bit confused as i searched in my virtual machine computer to see where hyper v manager is
@fbifido2
5 жыл бұрын
@13:00 could you have just enabled WinRM and then add the nano VM to server manager, then configure it from there?
@Flguy1976_1
4 жыл бұрын
nick thanks for all your vids, using this for a refresh! look forward to 2019
3 жыл бұрын
Please tell me, Where i can get NanoServer Folder? In DVD dont have NanoServer folder
@benbeitler63
7 жыл бұрын
Hi Nick, many thanks for all your video's on KZitem. Is it possible that you add your used Powershell commands as text under your video's so that we can cut and paste them. Should be great. Go on with making video's. They are very helpful for me.
@NLBSolutions
7 жыл бұрын
Hi Ben, sure no problem. This is a great suggestion, I will start doing that in the future. We can call that the NLB cheat sheet :)
@iammoseskiti
4 жыл бұрын
Kindly create PowerShell videos. With descriptive and easy explanation. would really appreciate. Also, Kindly zoom in the steps you take and when on powershell for us to clealy view the commands.
@RandomTorok
5 жыл бұрын
When I try to join the domain I get the following error. I've even tried to add the /REUSE switch as it suggests. Provisioning the computer... Failed to provision [starbase4] in the domain [mydomain.net]: 0x5. It may be necessary to specify /REUSE when running djoin.exe again with the same machine name. Computer provisioning failed: 0x5. Access is denied.
@hazevantassel5309
6 жыл бұрын
When I attempt to convert the image in powershell I get the following error: The property 'Name' cannot be found on this object. Verify that the property exists. At C:\Nano\NanoServerImageGenerator.psm1:1390 char:9 + $Script:Language = (Get-ChildItem -Path $Script:PackagesPath ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (:) [], ParentContainsErrorRecordException + FullyQualifiedErrorId : PropertyNotFoundStrict Any ideas?
@Crayf2024
7 жыл бұрын
I downloaded an .ISO, will I still be able to find the file you are talking about at the start?
@NLBSolutions
7 жыл бұрын
Hi Dan, depending on the .ISO image that you've downloaded. If it is Windows Server 2016 Standard/Datacenter it should be there.
@ddal3998
7 жыл бұрын
hey nick, really great stuff. i'm a newbie with the ws2016. in your videos, you use default gateway as 192.168.1.254. what this address corresponds to? it's your router, isn't it?
@NLBSolutions
7 жыл бұрын
Hi Dima, thank you for your support. Yes, you are correct this is my router.
@ddal3998
7 жыл бұрын
great material, nick!!! keep up the great work, you're awesome!
@NLBSolutions
7 жыл бұрын
Thank you so much Dima! It really means a lot to me when people are enjoying my content.
@ddal3998
7 жыл бұрын
by the way, nick, using hyper-v and ad ds on the same machine isn't recommended, according to MS and you mention it too a couple of times. is it ok to install a virtual machine with the hyper-v, then create a guest with the WS2016, and use it as a domain controller + ad ds? is it a good practice?
@ItIsWhatItIs
7 жыл бұрын
hyper-V does not work on Virtuabox
@whatsnewbibag6193
3 жыл бұрын
This video really works and great man easily make understandable all commands.............. Thanks a lot
@MartinPurvis
4 жыл бұрын
I’m learning about this to pass my MCSA Server 2016, very informative!
@omolajaamos3071
4 жыл бұрын
Did you pass the MCSA?
@MartinPurvis
4 жыл бұрын
Michael Amos I failed the first exam, I had one question on nano server. Was gutted!
@drptech1445
2 ай бұрын
Hey I found these videos that is helping me a beginner to setup my server 2016 I know these were done a long time but can I get a little help please, I am little confuse, with video on how to install windows Nano Server 2016, please remember it my first time setting up a server
@angus004004
7 жыл бұрын
How about if I dont have new volume E? Cause I didnt clarify a partition when I install server 2016
@NLBSolutions
7 жыл бұрын
Hi Garson, there are few ways to resize a partition. Also if you are using a Virtual Machine you can add a virtual disk and create new partition after you install the Windows.
@skiextreme802
7 жыл бұрын
Thanks for the video - Any tips on getting Nano to run on an ESXi server through VSphere?
@TheOldElement
6 жыл бұрын
Matt Audette , At this time I dont believe MS server supports nested virtual machines I might be wrong but this is just from experience I would boot the nano server up from the vm box your using
@nutterztube
8 жыл бұрын
+NLB Solutions Is nanoserver capable of acting as a WSUS server?
@NLBSolutions
8 жыл бұрын
Hello Knaughty F, there is no option for WSUS Nano Server, for now. According to Microsoft the Nano Server is suitable for: A host for Hyper-V virtual machines, either in clusters or not As a storage host for Scale-Out File Server. As a DNS server As a web server running Internet Information Services (IIS) As a host for applications that are developed using cloud application patterns and run in a container or virtual machine guest operating system
@adolfothiagodelcaro529
5 жыл бұрын
How can I enable FTP and create multiple sites, can I use some specific tool to manage the sites without being by the server manager like Visual Studio?
@Garolfa
5 жыл бұрын
Podes usar Internet Information Server (IIS) en windows 2016 esta en la version 10. Con nano server se puede hacer dado que existen modulos de Powershell que permiten administrarlos, como es el modulo 'Import-Module WebAdministration' Con IIS se pueden crear sitios con distintos bindings (como seria virtualhosts en apache), FTP y SFTP
@adolfothiagodelcaro529
5 жыл бұрын
@@Garolfa Thankyou
@satishupreti6652
6 жыл бұрын
Hi Nike thanks you very much for creating videos could you please let me know if you have any wed site where I can see which trainings you have
@NLBSolutions
6 жыл бұрын
Hi Satish, thank you for the nice comment. My site is currently under development and will be online soon.
@stellarsims5059
7 жыл бұрын
I'm following the info you provide in the video, but am running into an error (listed below) please advise: PS C:\Users\Administrator> Import-Module C:\Nano\NanoServerImageGenerator.psm1 PS C:\Users\Administrator> New-NanoServerImage -Edition Datacenter -MediaPath G:\ -BasePath C:\Nano -TargetPath C:\Nano\ Minds-01.vhdx -DeploymentType Guest -ComputerName Minds-Nano-01 -storage -Package Microsoft-NanoServer-IIS-Package cmdlet New-NanoServerImage at command pipeline position 1 Supply values for the following parameters: AdministratorPassword: ************** WARNING: Terminating due to an error. See log file at: C:\Nano\Logs\2017-03-05_03-02-31-84 The requested image could not be created. Consult the command output for additional information. At C:\Nano\NanoServerImageGenerator.psm1:1796 char:9 + Throw $Strings.ERR_IMAGE_WAS_NOT_PRODUCED + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : OperationStopped: (The requested i...al information.:String) [], RuntimeException + FullyQualifiedErrorId : The requested image could not be created. Consult the command output for additional info rmation. What am I doing wrong?
@NLBSolutions
7 жыл бұрын
I would advise you to check the log in here - C:\Nano\Logs\2017-03-05_03-02-31-84. There will be more details there. From the command I cannot clearly see any issues.
@ThianBrodie
6 жыл бұрын
Hi Nick, all good with your videos up until now, 1st error I have encountered is when trying to djoin, i get in powershell; Loading provisioning data from the following file: [C:\odjblob]. The offline domain join request failed: 0x32. The request is not supported. Any ideas buddy?
@ThianBrodie
6 жыл бұрын
Forget that, I had the Static Ip set as the same as the Host, I popped it on a random static ip address and it worked just fine. One thing that has confused me, which I have noticed, with Hyper V, I can not see the enhanced features, I have checked "Allow enhanced session mode", "Use enhanced session mode", and in Integration options ticked "Guest Services", however Enhanced Features is still greyed out in the Datacenter version of 2016, could you advise please Nick?
@MrYounis26
2 жыл бұрын
Thanks for another video, I have followed your 2 previous videos and I am 7 minutes into this video, however I cant find hyper v manager in my system.
@riddlemaster882
6 жыл бұрын
hi nick im not able to login into nanoserver its coming like the username, domain or password incorrect but i entered correct credentials
@joejohnson6695
7 жыл бұрын
Where did you pull the static IP address from for the Nano server?
@NLBSolutions
7 жыл бұрын
Hi Joe, if I understand you correctly, the static IP address is a random free address from my internal network I've created for the demo.
@bamboumuzic4931
7 жыл бұрын
You answered my question. Thanks
@Nimitz_oceo
7 жыл бұрын
Hi Nick I really appreciate all your wonderful videos... I will like to know if it's possible to install Nano Server VMware WorkStation. As I have many other services already configured and working with VMware and not HyperV.
@NLBSolutions
6 жыл бұрын
Hi Christian, yes you can convert the VHDX to VMDK and power it on on VMware.
@khushalsapariya9304
Жыл бұрын
Whats the use of this Nano Server?
@najimabdelwahad4579
5 жыл бұрын
many thanks for all your video's on KZitem. Your are the best :-)
@mohamedabdurrahman2316
5 жыл бұрын
Hi Nick It is a very good learning video for me Thanks a lot.
@CarlosFernan87
5 жыл бұрын
Thanks a lot. Finally i managed to install NanoServer!!
@mudimbebaderha7477
7 жыл бұрын
Thank a lot for this new version of windows server
@NLBSolutions
7 жыл бұрын
Thank you for you support, mudimbe!
@MiVentanaVirtualTI
7 жыл бұрын
I downloaded vhd from the front and I do not know what is user name and password and I already implement it in hyper -v but will not let me enter
@NLBSolutions
7 жыл бұрын
Hi Ventana, this is a tricky one, I also remember downloading the VHD directly and not able to login to it. You can try without any password, if this is still not working you can create a new nano server VHD using the .wim image and provide a password in there.
@MiVentanaVirtualTI
7 жыл бұрын
thank you create nano server y habilty user y password
@glenm5181
7 жыл бұрын
Hi NLB Solutions, where can I get the ISO of Nano Server? Thanks!
@NLBSolutions
6 жыл бұрын
Hi Glen, I think there should be a prepared ISO in the Microsoft Evaluation Centre - www.microsoft.com/en-us/evalcenter/
@cesarlopes9019
5 жыл бұрын
Hi Nike, fantastic videos, many thanks
@frankhotikapo3233
4 жыл бұрын
Great videos
@Roadhouse-20
5 жыл бұрын
I followed all instructions as stated but getting error "Nano-01' Filed to change state when starting the nano server. Please help.
@tragicworms3418
6 жыл бұрын
I finally got it thanks to this video!!! I’ve been at it for days thank you so much But when I returned to my virtual environment a notification popped up about the state of the VMs and without thinking I hit “revert”... Now my nano server is still joined to my domain, but the server is listed as “Online - Access Denied” in server manager. Furthermore, when I try to remote the nano server using enter-pssession I’m getting a straight up “access is denied” error ): I don’t understand why since I’m using the same credentials as before...
@NLBSolutions
6 жыл бұрын
Hi Martin, sorry for the late reply. I would assume you made a snapshot of the initial state of the VM, so check with the initial credentials. Or just deploy a new nano, should be fine.
@Crayf2024
7 жыл бұрын
YOU ARE SENT BY GOD!
@NLBSolutions
7 жыл бұрын
Thank you, Dan. I think we are all send by God :)
@joejohnson6695
7 жыл бұрын
You're doing an awesome job by the way.
@NLBSolutions
7 жыл бұрын
Thank you, Joe! Much appreciated !
@gaiusbaltar7122
6 жыл бұрын
Good quick video!
@adeolaadeyeye2748
6 жыл бұрын
Awesome Videos ... Video 14 was missing..
@Emohtcm
7 жыл бұрын
thanks for great job you are doing ... I need from you to share your windows 2016 your using as ISO image
@NLBSolutions
7 жыл бұрын
Thank you, Ali! Actually the iso is an evaluation copy downloaded from Microsoft Evaluation Center for free.
@BushgangNBA
5 жыл бұрын
im stuck i donty have the hyper v manager.. i fell like quiting anybody to help.. im confused
@mm3nrx
5 жыл бұрын
depends on windows version, home does not have or allow hyper v manager to be used or installed, only pro, enterprise and educational do, or if you mean server side? then u have to add it as a role, but the installation routine is missing from the video :( but easily installed and configured
@JPV1987
8 жыл бұрын
Very good video ! Will You do a video on DSC Desirate state configuration ?
@NLBSolutions
8 жыл бұрын
Thank you Jean-Pierre, of course I can try to work it out. Stay tuned!
@laxmi315
8 жыл бұрын
i found this video very useful
@NLBSolutions
8 жыл бұрын
Thank you for your support Laxami Joshi!
@vimalkumar6323
7 жыл бұрын
Awesome Man
@NLBSolutions
7 жыл бұрын
Thank you, viMal!
@SameehGhoneim
7 жыл бұрын
Great Job Deserve Like and Share
@NLBSolutions
7 жыл бұрын
Thank you, Sameeh!
@JackyTran
7 жыл бұрын
This is great! Thanks
@NLBSolutions
7 жыл бұрын
Thank you, Jacky!
@cloudengineersacademy
6 жыл бұрын
excellent Video !!
@NLBSolutions
6 жыл бұрын
Thank you, CasualClass!
@tomjerry3590
7 жыл бұрын
Excellent
@orenmesh8471
8 жыл бұрын
Thank you so much for the info!!
@NLBSolutions
8 жыл бұрын
Thank you for the support, Oren!
@pankajchameliya3171
5 жыл бұрын
Ur computer font size is very small .. Kindly font size update for anroid mobile
@richardtheone77
7 жыл бұрын
You're the man!!!
@NLBSolutions
6 жыл бұрын
Thank you Richard!
@sunilkurale2813
7 жыл бұрын
very nice
@NLBSolutions
7 жыл бұрын
Thank you, Sunil!
@Wil_Bloodworth
7 жыл бұрын
Excellent!
@NLBSolutions
7 жыл бұрын
Thank you for the support, William!
@philippe6724
7 жыл бұрын
NLB Solutions cc
@virtus59
7 жыл бұрын
Nice video!!
@NLBSolutions
6 жыл бұрын
Thank you!
@Devianovic2010
6 жыл бұрын
great job!
@NLBSolutions
6 жыл бұрын
Thank you Devian!
@Spacefab
7 жыл бұрын
Thanks for your video but please, make zooms !
@NLBSolutions
7 жыл бұрын
Thank you for the suggestion, Phab1en. I will see what I can do!
Пікірлер: 120