Excellent video! Thank you for your time and effort. Learned a lot from your video.
@Marty09933
7 ай бұрын
Hi Jeffery Galdamez your welcome and thank you for watching i appreciate you
@manyglacier1980
Жыл бұрын
Thanks. I appreciate the time you put into running the camera and editing.
@Marty09933
Жыл бұрын
Hi Paul Novelli thank you very much sir and thank you for watching i appreciate you
@dougtowers
3 жыл бұрын
Wonderful! Great video... I'm glad you took the time to explain many details... taking the video while you're working and explaining at the same time , slows you down. Thank you!
@Marty09933
3 жыл бұрын
dougtowers hello your welcome and thank you for watching I appreciate you. It does slow things down but I don’t mind as long as you get something out of it . Good luck
@edbtzkhud
Жыл бұрын
Excellent video. Clear and concise! You’re a patient gentleman. Thank you!
@Marty09933
Жыл бұрын
Hi Ebtzkhud thank you very much and thank you for watching I appreciate you
@h-community
2 жыл бұрын
recording was amazing. Never seen so much clarity. wonderful. Thank you for your time.
@Marty09933
2 жыл бұрын
Hi h thank you brother and thanks for watching I appreciate you
@ryderrygiel1515
6 ай бұрын
Appreciate you filming this work. Thank you, and good job!
@Marty09933
6 ай бұрын
Hi Ryder Rygiel thank you very much. I hope it helped you and thank you for watching. I appreciate you.
@minibikes502matter
4 жыл бұрын
Thank you very much for this excellent video. Very informative and much appreciated.
@Marty09933
4 жыл бұрын
Richard Sheridan thank you I’m glad it helped I appreciate you
@robertmattison1282
3 жыл бұрын
Your rock. Thank You for this video. It people like you, that enjoy working on cars/vehicles that make our world a better place. Peace to you brother.
@Marty09933
3 жыл бұрын
Robert Mattison hello your welcome and thank you for watching I really appreciate you good luck brother 👍
@markwidzinski1079
2 жыл бұрын
You forgot something. You need to bend down the edges of the keyed washer on the inner tie rod to keep the tie rod from unscrewing from the steering rack.
@travisbeaudette33
3 жыл бұрын
Excellent video. Thanks a bunch. Greatly appreciate it!
@LTX-Shep
3 жыл бұрын
Nice video. Thanks for going through the hassle of recording while working. Very helpful.
@Marty09933
3 жыл бұрын
Hi L Shep your welcome I’m glad it helped you . And thank you for watching I appreciate you
@rickpuhl805
Жыл бұрын
Thanks man. Top notch video and I like how you explain stuff.
@Marty09933
Жыл бұрын
Hi Rick Puhl your welcome and thank you for watching I appreciate you
@glwainscott
3 жыл бұрын
God bless you man, I was dreading this job til I watched your video
@Marty09933
3 жыл бұрын
Hi Tyler Stacy thank you I appreciate you you . You’ll get it good luck 👍
@mrfuel1866
2 жыл бұрын
Great viedo buddy, thank you very much for all you did for us...
@chadfield376
3 жыл бұрын
Great video man, well detailed on the key items and components.
@Marty09933
3 жыл бұрын
Hi Chad Field thank you and thanks for watching I appreciate you
@antoniop5889
4 жыл бұрын
Thanks for posting ill be doing inner and outer tie rods to a friends avalon 05
@Marty09933
4 жыл бұрын
Antonio P your welcome and thank you for watching. Hope all goes well. appreciate you
@vadw92011
2 ай бұрын
the PowerBilt tool comes either for SUV's or trucks or cars you have to make sure you let the store know which vehicle you have for it to work
@bryantonojeta5064
2 жыл бұрын
Thanks for the Video Bro..
@Marty09933
2 жыл бұрын
Hi Bryant Onojeta your welcome and thanks for watching i appreciate you
@nelsonjaneiro5543
3 жыл бұрын
Good job thank you for the video...👍
@joycejeff38
3 жыл бұрын
Great video man!! Well explained
@Marty09933
3 жыл бұрын
Hi joycejeff38 thank you very much and thank you for watching I appreciate
@whateverhappens1140
2 жыл бұрын
Thanks.! This is very helpful.
@Marty09933
2 жыл бұрын
Hi Whatever happens your welcome and thank you for watching I appreciate you
@imVertigo
Жыл бұрын
Outstanding. Thank you.
@Marty09933
Жыл бұрын
Hi Scott Wood your welcome and thank you for watching. I appreciate you.
@greenflintriver
3 жыл бұрын
Thank you good job.
@Marty09933
3 жыл бұрын
Hello rob Roth your welcome and thank you for watching I appreciate
@shoreline8686
Жыл бұрын
Very Good tutorial. Can you tell what side you need if let's say your going around a left hand corner and it makes noise but nothing when going to the right.
@Marty09933
Жыл бұрын
Hi Shore Line usually it the side you turn to . If you turn right and it clicks it’s the right one if you turn left and it clicks it’s the left hope that helps and thank you for watching I appreciate you
@user-gx3pd8cg4y
8 ай бұрын
Did you use 3rd party for replacement or OEM? If 3rd party, what did you use and has it held up since being replaced?
@Marty09933
8 ай бұрын
Hi user-gx3pd8cg4y it was from auto zone duralast yes it’s still holding up still running to this day thanks for watching I appreciate you.
@samukahtviv1
3 жыл бұрын
Thank you for your vide, I’ll try to tackle this during the summer. What is that brand name for the tie rod removal?
@Marty09933
3 жыл бұрын
Hi Sammy J T your welcome and thank you for watching I appreciate you here is the info it’s from harbor freight ....www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiKxYeg9cbuAhWp8sAKHbPUCzUYABAGGgJpbQ&ae=2&ohost=www.google.com&cid=CAASEuRoT_xTyb-AP139AqlneTNQdw&sig=AOD64_2Y7TrfuyfBNPPa0Qkvg5akHWCWHQ&ctype=5&q=&ved=2ahUKEwjSrvyf9cbuAhVtmK0KHSDJAhQQwg96BAgCECk&adurl=
@samukahtviv1
3 жыл бұрын
@@Marty09933 thank you. Is it the same as the green tie rod end removal tool? I was looking for that green tool for the inner tie rod & also, did you buy oem axles or if not what brand axle? Every time I reverse into driveway from a stop and I hear a poppin noise when turning wheels. Could that be axle or tie rod? I have the 07 with 187k miles
@Marty09933
3 жыл бұрын
@@samukahtviv1 no sorry that one is for the outer tie rods . the green one is for inner tie rods you can rent it at auto-zone kinda expensive I think about $150.00 maybe ? But of course you get your money back when you return it. As for the popping hard to tell need more info . But from my experience a single pop is usually a balljoint. Continuously popping CV axle . Jack up car and take a long rod and put under tire and have someone pull up and down on it and look for movement in tie rod and ball joints ...........www.google.com/aclk?sa=l&ai=DChcSEwj03_ubzsfuAhWD8MAKHcW5A4UYABA0GgJpbQ&sig=AOD64_3gauQPRj4w8jA746cCuOyKI7U5CQ&ctype=5&q=&ved=0ahUKEwjOi_abzsfuAhUJTawKHYgHAVsQww8Ingk&adurl=
@Marty09933
3 жыл бұрын
Samy JT ....www.oreillyauto.com/shop/brands/import-direct-driveline-969
@samukahtviv1
3 жыл бұрын
@@Marty09933 thank you! your video explained everything perfectly in details, it gave me confidence as a first diy'er... ok i will check on that. I Brought this car used lol since then ive been repairing little things each time. Next i got to replace rear control arm and one of the bolts seized into the rear spindle...smh..Once you repair one thing, another goes bad. Makes you wonder if its worth repairing anymore for that many miles.
@sharanpyata4109
2 ай бұрын
Hello Marty, may I know the cost to replace that??
@Marty09933
2 ай бұрын
Hi sharanpyate it depends where you go anywhere from 300 up to 530 thank you for watching. I really appreciate you.
@TheodorePendergrass
2 жыл бұрын
You was lucky, that bearing won't just tap out like that, if the car has high mileage, you will have to cut hte axle and remove the whole bracket and shaft and knock it out outside the car, and then it's still will be tough.
@Marty09933
2 жыл бұрын
Hi Theodore Pendergrass your right I was Hoping it wouldn’t be stuck .I’ve done them before when they are stuck and it is hell not only those I’ve done other jobs that do not cooperate with you and it’s terrible thank God this one just cooperated with me. Thanks for your comment . thanks for watching I appreciate you
@TheodorePendergrass
2 жыл бұрын
@@Marty09933 I wish someone would have told me, I put mines back together to figure out how i can cut it out. My bearing sits in with the transmission motor mount, and the cv axle block one of the bolts to take the motor mount loose, if I can cut it in 2 places, I can remove the mount and knock the bearing out, they're no other way around it. Your video was spot on, just wanted to warn folks, that they don't always come out that easy.
@Marty09933
2 жыл бұрын
@@TheodorePendergrass yes I hate when someone makes a video and it comes out so easy and then when I do it it’s super hard lol that’s the way it is sometimes they come out easy and sometimes they give you hell thanks again brother appreciate you
@rogeliolucas3306
2 жыл бұрын
You are the best man A++++. I am going to tackle mine right now. Thanks
@Marty09933
2 жыл бұрын
@@rogeliolucas3306 thank you sir I really appreciate that . And thanks for watching I appreciate you
@ryanthorpe6365
3 жыл бұрын
He needs to take out the retainer screw on the bracket holding the CV axle in place it would have came out in two or three hits ( the one right next to the clip its total ignored)
@edbtzkhud
Жыл бұрын
I was thinking the exact same thing
@reddragon3787
10 ай бұрын
Good job, you should come and change mine.
@Marty09933
10 ай бұрын
Hi Red Dragon i would if you lived in Amarillo TX lol thanks for watching i appreciate you
Пікірлер: 68