This worked for me 2005 f350. Just touched the solder joints with a solder iron with a fine tip and presto. Nothing else. Just the harness pins. THANK YOU!
@bigmiked52
4 жыл бұрын
All the ones I've repaired so far I'm still working fine for the past 3 years thanks
@AK7Woody
Жыл бұрын
Troubleshooting for two days. I knew it was the cluster. Re-soldered what I could and heat-gun the chip. Left front cover off to adjust needles. 👍🏼
@shawnhoose9004
Ай бұрын
You can't change the mileage by taking the cluster out it's in the computer. Even if you change the cluster out it puts your mileage back in the new cluster even if it came out of something with more miles. Great video though
@speakbigtruth9383
Жыл бұрын
Nice job. I definitely liked and subscribed for that!!!
@johnrutherford9262
2 жыл бұрын
Sometimes good too attack things yourself its good too know how your truck works
@bigmiked52
2 жыл бұрын
Yes sir
@dhoop688
2 жыл бұрын
Mine was the plug. I drilled a hole in the dash support and zip tied the wire harness to it and didn't push the cam lock all the way. .. fixed
@bullitt5337
3 ай бұрын
Great! Now go change that damn smoke alarm battery lol
@bigmiked52
3 ай бұрын
Go watch the latest video on my channel there's an update
@somebodysnobody9113
4 жыл бұрын
So was that a permanent fix or did the issue come back? I’ve got an 07 superduty and desoldered the blue connector, when I pulled it out I found that the printed ribbon behind the connector may have been damaged due to the connector moving from having split plastic pins instead of screws like the other.
@sbfnation2535
4 ай бұрын
I don’t think you can tamper with the mileage isn’t it digital. Man I hope this works for me
@joeytubbs6797
4 жыл бұрын
Thanks bigmiked52, I'm tearing into it today.
@portermore3864
Жыл бұрын
Good deal thank you
@ryangriffiths2029
3 жыл бұрын
I had the same tape on mine with black marker. I think there mustve been a recall or something
@soulsnatcher9228
4 жыл бұрын
Not supposed to cut those zip ties. And you can't do anything with mileage on a digital dash. It would have to be flashed.
@JimmyLarsen1
2 жыл бұрын
What does flashed mean
@n004drakeofficial4
2 жыл бұрын
I love it. I'm not spending no mo money on this damn trucks. Hahahah
@bigmiked52
2 жыл бұрын
Yeah and I just put a $8,000 motor in it hahaha and a transmission LOL
@brucepolaske6780
4 жыл бұрын
I just pulled my cluster out and I've got the duct tape with marker on it too.
@stevendavis3012
4 жыл бұрын
Pulled my '06 this evening and the duct tape and marker is on as well -- I think it is a rub point and the tape quiets a squeak
@bigmiked52
4 жыл бұрын
Yes I had another guy had the same issue and they fixed it
@musicman7469
6 ай бұрын
Ok my gauge has the exact same tape and prymarks on the outside ? I almost wonder if it isn’t an already fixed dash becuase I just noticed it. The marker is even on the same side of the tape
@bigmiked52
6 ай бұрын
That's the old video a few years later it started happening again and it ended up being a relay watch the new video I have on my channel
@bigmiked52
4 жыл бұрын
Yes I learned that I replace them with new ones
@datnotme9921
2 жыл бұрын
The speedometer, tach, oil,fuel,temp and battery gauges, the needles are flickering. No dome lights, radio and shifter "OFF" Keeps flashing also. The gauges constantly shaking, stop a few seconds or so and back to shaking. What's causing this? appreciateanh advice. Its a '05 Superduty XL 6.0 Its NOT making good contact (where the solder is)is why they shake? Add a little solder on them?
@bigmiked52
2 жыл бұрын
The back of the board on the cluster panel needs to be resoldered watch the video I show how to do it thanks
@datnotme9921
2 жыл бұрын
@@bigmiked52 yup, thanks! I pulled the light switch by holding a button down behind panel on light switch box then, pulling the knob out. Will the dash panel come out there or is there something else holding it in that area? I've the 2ea. 7mm screws. I have the dash out except that spot. The light switch knob is out.
@JoJo-ck9is
3 жыл бұрын
My tranny temp and engine temp gauges went out. The needles still light up and move like they’re supposed to, and everything else still works like normal.. Any tips on that?
@lancewashington8851
Жыл бұрын
What was the name of that cluster that was behind the dash for your gages that was Going Out?🙏🏾
@bigmiked52
Жыл бұрын
Don't remember
@bigmiked52
4 жыл бұрын
Yes some one was in there
@jeffpruett5721
2 жыл бұрын
I'm having the exact same problem and when I removed the cluster it also had that same tape on the bottom. Is the something people do when they mess with or change the mileage?
@bigmiked52
2 жыл бұрын
Well what I believe it is and I've heard this from other people is the previous owner will take the cluster out drive the truck without it all over the place when it gets 300,000 miles on it he puts the original cluster back in with the low miles on it and sells the truck to the dealer and you become the unsuspected new truck owner thinking that has 70,000 miles on it but it has 300,000 I've even heard that they take the seat out also and the rubber off the brake and gas pedal some people just no good
@JoJo-ck9is
3 жыл бұрын
My transmission temp, and engine temp gauges stopped lighting up. Needles light up and work normal.. any tips?
@bigmiked52
3 жыл бұрын
Check the wires on gage
@truthwillsetyoufree1503
4 жыл бұрын
There is the spirit soldier fix it yourself 😆 🤣
@broken_6.052
4 жыл бұрын
My 05 powerstroke 6.0 is having issues like this,except it's the radio that turns off and wipers turn on by themselves,then stop working
@user-rl6vv2go7f
4 ай бұрын
the duct tape is factory, why no one has a great answer
@bigmiked52
4 жыл бұрын
No it only effects the windows and radio thanks
@6.0hhh
4 жыл бұрын
What size are those bulbs and did you see the green film? Ive read you can remove that green film and put LED lights in there.
@bigmiked52
4 жыл бұрын
Yes you can I just took one bulb to Advance Auto Parts and they have the bulbs
@6.0hhh
4 жыл бұрын
@@bigmiked52 sweet. Thanks for the reply.
@timothygaits7972
4 жыл бұрын
Fuckin garbage.Im on my third cluster in my 06. These come from Rawsonville/Visteon with the duct tape on them.
@bigmiked52
3 жыл бұрын
Your welcome
@bigmiked52
4 жыл бұрын
You must be the one that's f***** it up
@bigmiked52
4 жыл бұрын
No idea sorry open it up and wiggle on all the harnesses
@disdude7338
4 жыл бұрын
I have a 06 f250 6.0 and my turn signals stopped working my hazards still turn on but when I go to turn my signals on nothing
@bigmiked52
4 жыл бұрын
Did you check the fuses?
@mikehaslett3738
4 жыл бұрын
Multi function switch failure or the plug has come loose. Fairly common
@bigmiked52
4 жыл бұрын
Permanent
@dieselbaxter756
2 жыл бұрын
If thus works dude im gonna be shooooook. Its this or pay 300 for the medics to fix it
@dhoop688
2 жыл бұрын
The cam lock loosen s when fully pushed!
@bigmiked52
2 жыл бұрын
Yes use a zip tie or hot glue
@dhoop688
2 жыл бұрын
@@bigmiked52 thanks for giving me a point to look at
@dhoop688
2 жыл бұрын
I do alot of off road as am a farmer. Every time I hit a bump it would act up. The wire harness was hanging on the plug. Hence breaking connection
@matthewdailey8609
4 жыл бұрын
Hey brother I have an 07 f250 lariat 4x4 that has been bulletproofed and has had the o.e.m gauges unhooked and someone installed peer gauges but also has an edge evolution tuner on it all my dash light are on lip mode light abs light check engine light it keeps pulling up a code the garage says may be the tcm but with the hack job on the wiring not sure truck runs amazing!!! But these lights are stressing me out any ideas? Thank you in advance!! I’m new to diesels 6.0
@bigmiked52
4 жыл бұрын
Are the gauges swooping up and down do the windows and radio work
@matthewdailey8609
4 жыл бұрын
bigmiked52 yes the gauges jump every once in a while but the radio and windows work !the left turn signal works but now passenger side just buzzes builds are all good half the gauge lights are bright other are dim. When trucks running high beams work on passengers side as but not drivers than when turned off exact opposite the truck has brand new battery’s and disconnects installed because it seems to have a parasitic drain as well
@matthewdailey8609
4 жыл бұрын
bigmiked52 what about the security control module ? Would this create this problem ? And why are they attainable thru Ford ?
@fredsavage4925
Жыл бұрын
First problem: you bought it from some mexicans in texas.
@bigmiked52
Жыл бұрын
Lololol
@bigmiked52
4 жыл бұрын
Try what I did new video maybe all the connections on your cluster of loose they come loose resolder them make sure the daughter that you use has flux in it
@jong6741
Жыл бұрын
Your should treat peoples daughters well. Flux is a good start though.
@popper58
4 жыл бұрын
When your dash would go out, did it affect the driveability? I have 05 6.0 I just purchased, I probably have multiple issues but mine started cutting out as soon as the dash when out.
@mitchploeg
4 жыл бұрын
JRW ..alternator
@anthonyfrios
4 жыл бұрын
@@mitchploeg it affects the alternator too?
@mitchploeg
4 жыл бұрын
Anthony Rios the other way around. Alternator going out will cause dash, radio, and A/C to go haywire.
@popper58
4 жыл бұрын
@@mitchploeg my issue was I had just put batteries in it and I somehow missed one of the cables that went across to the 2nd battery.
@slickking9526
2 жыл бұрын
@JRW Did you find solution. I'm having same issue.
@bassdee10
5 жыл бұрын
99999
@midgemaniaflyfishing
3 жыл бұрын
5 minutes in.. zero help so far lol
@samsegovia8615
4 жыл бұрын
If you do not sure who did don't be blamed on Mexicans. It could one of race. Stop pointing fingers
Пікірлер: 82