This mf brave doing these videos in a Chicago alley😂😂😂😮
@MoonHawk01
Жыл бұрын
Shit tuff I’ve been looking to see someone do this 🔥
@Custom_MoparBuilds
Жыл бұрын
Appreciate it bro
@tylerzidek25
8 ай бұрын
@@Custom_MoparBuildswhy upbadge tho?
@Bougie.Weirdo
Ай бұрын
A real car guy 💪🏽💪🏽💪🏽💪🏽 #BuiltNotBought
@DailyFlipz
Жыл бұрын
Keep posting fam I wanna see how this turn out
@Custom_MoparBuilds
Жыл бұрын
Bet
@FireantzBlaze
Жыл бұрын
my dad did some shit like this with ahonda civic and a honda accord he got the v6 engine in the civic that MOFO was fast as hell because it was so light
@GBeano
3 ай бұрын
Bro you didn’t have to change the headlights??
@stashinprofit
11 ай бұрын
Cool. I wouldn’t do that personally I’m looking into doing a interior swap. Was thinking about swapping my 2010 r/t for a full scatpack swap but I feel like that 5.7 has more potential for a build than the scat but idk
@jorgeyhemi5.7
11 ай бұрын
The 5.7 definitely has more potential than the 6.4 straight off the lot. The 6.4 requires a lot of supporting mods and forged internals before you even think about boost. The 392 is better if you're trying to go all motor. If you're looking to boost, then go with the 5.7. It's more reliable than the 6.4 as well with proper maintenance. Check out incredible hemi on here. He has a boosted 5.7 1500.l and plenty other boosted 5.7s.
@nedunonnyp704
Жыл бұрын
Did you really Try To Swap The Front End Without Swapping The Core Support? 28:33 I don't Think you should have to do that. If it Was the Correct Tie Bar Support. Hope and Glad it Worked Out For You though..
@lilstuart1584
Жыл бұрын
Love your videos, when you did the swap did you have to do any splicing to make the headlights work? And did you you use the core support off the new body scat on your charger to have it fit right?
@JulioSanchez-bz9ko
18 күн бұрын
Any word on the headlights?
@welcometomychannelswelcome7261
3 ай бұрын
Great video. Where did you stole the parts?
@THEMAR360
Жыл бұрын
This dope bro 👌 definitely subscribed
@Tinybam83
4 ай бұрын
Great video, 👍 first to actually show the swap.
@DATBOIRED
Жыл бұрын
This hard bro I’m about to do it to my old school too
@GlocknLoadedd
Жыл бұрын
You tuff for this bro !!!
@junedkaka
7 ай бұрын
So the fenders just line up, no cutting required
@chevissuraimu7656
Жыл бұрын
we’re the headlights plug and play or did you have to do some sort of wire cutting or adapting
@dantaviouspaige3121
10 ай бұрын
You can change the front to any model charger like dis ??
@pinoyyue28
4 ай бұрын
did the fenders bolt right up?
@bellathomas4600
Жыл бұрын
Ok I see you ❤️🔥
@Custom_MoparBuilds
Жыл бұрын
❤
@boxingfreak5455
8 ай бұрын
Yo keep grinding can’t wait to see how everything comes out once you get it done 🫡
@Mike-ic5ph
Жыл бұрын
You can do interior swap to bro the console and the wheel
@claycomadekai
11 ай бұрын
So from what i heard its a direct bolt on for the interior swap right?
@nicklicehammer1241
Жыл бұрын
How you connect the headlights
@liiqua1
9 ай бұрын
Do the rear bumper
@gabrieldiaz5737
Жыл бұрын
How did u get the lights to fit what did you have to do
@Custom_MoparBuilds
Жыл бұрын
I rigged it up using the old connector
@rashaadgolden9997
11 ай бұрын
Aye dawg did you have to swap the finders ?
@Gottilifestyle123
4 ай бұрын
Yea you have to
@statixbolt
Жыл бұрын
rear end swap????
@DEVMADEIT_Beats
Жыл бұрын
Raw
@imrodrigomejia
4 ай бұрын
😮😮😮😮
@sopranosmoov870
Жыл бұрын
How much did everything cost?
@James-df1hx
6 ай бұрын
My guess for the cost would be maybe 1000 to 2100 depending on where he got the bumper and fenders and tail lights
@chriswright1832
Жыл бұрын
Yessirr
@Custom_MoparBuilds
Жыл бұрын
Glooking broski🖤
@Outtwest4
Жыл бұрын
How did the headlights work
@Custom_MoparBuilds
Жыл бұрын
I didn’t connect nothing new with the light
@erictalameasina1336
4 ай бұрын
Something tells me those parts are off a stolen scat.... That's jus my opinion
@TenerzHD
Жыл бұрын
What was done for the headlights to fit and work ? Looking for advice
@gee9ine138
Ай бұрын
Idk if u still need this but it’s the radiator support core,, he still has the old gen support core which is why his headlight not really fitting
@Srtray1017
Жыл бұрын
You need a new style radiator support to make the headlights fit better fam
@Custom_MoparBuilds
Жыл бұрын
Ok bet
@legateee8848
Жыл бұрын
This lit I’m doing the same build bro much motivation keep going don’t sell it add to em
@verzetzelsk8391
Жыл бұрын
How hard is this to do I’m tryna do this to my shi
@Custom_MoparBuilds
Жыл бұрын
Appreciate it fasho bro
@LouisJones-er6so
16 күн бұрын
Did everything bolt right on or did you have to do a lil finesse to get it to fit ?? Lmk gang im tryna do the same thing to my scat swap charger
@jjwhereyouat8926
Жыл бұрын
How you gonna fix the gap between the doors
@Jermain3G
Жыл бұрын
Damnn this go hard I was thinking about doing this to my car ngl
@Custom_MoparBuilds
Жыл бұрын
Do it
@jaylenshields3523
7 ай бұрын
How much it all cost
@dvii24dd
Жыл бұрын
Come do mine I’ll pay you
@airforcejuan6131
Жыл бұрын
i wanna know if it’s possible to put a 2011-2014 front bumper on a 2006-2010 dodge charger?most likely i can i would just have to prob change the hood aswell? if anyone can help answer this pls
@BigNephew200x
5 ай бұрын
Yhh u can I’m doing it dis year!
@marquiseh9366
Жыл бұрын
Did you swap the radiator support?
@ballingonabudgetlsbuilder5930
2 күн бұрын
The 2015 fenders on a 08 is a direct fit?
@juanguzman4410
Жыл бұрын
Did you have to change the upper tie bar?(radiator support) What do I need exactly? I know I need the hood, fenders, bumper (with grill & everything)) & headlights. What else? I was told to get the upper tie bar. But after that it’s basically plug & play
@420PeterGriffin
6 ай бұрын
Yes and you will also have to wire in the headlights but otherwise yes it’s plug and play
@jasminemayo2303
3 ай бұрын
My momma got a green scat pack 😅
@sopranosmoov870
Жыл бұрын
Where did you order your parts from?
@korex7532
Жыл бұрын
Junk yard… rear ended scat
@Romaticstyle
Жыл бұрын
Do the full conversion the trunk and back bumper too
@420PeterGriffin
6 ай бұрын
That’s much harder to do and you need to get an entire rear clip for that, you’re better off getting a 2011-2014 charger if you wanna do that.
@ManyFacedGod12
4 ай бұрын
Young Bro I admire your desire to put in your own work, but please invest in some quality tools. I watched your video and was impressed with your dedication. You're working too hard because of your tools. I wish I could send you some to help you learn and understand there's a reason why you should invest in quality tools if you want to work in any profession. Also consider going to school for autobody. You have an eye for it. Commitment to the craft will teach you proper techniques and the possibilities from mild to wild. Salute
@420PeterGriffin
6 ай бұрын
You should’ve been more careful with your shit now you’re gonna have to wet sand and redo the clearcoat to get all those scratches out.
@LT1Junior
7 ай бұрын
How’d you get the headlights to fit?!!!
@johnnybravo2985
9 ай бұрын
Hey bro, nice video. Quick question, so everything bolts up ? No cutting or welding needed ?
@oh468
6 ай бұрын
Do everything just bolt right onto 07 charger from a 15+ charger
@Game-ZoneYT
Жыл бұрын
Is there a way you can swap the trunk lid for a newer dodge challenger model on the 2008 dodge charger and will it line up properly ?
@meechiekapone9545
8 ай бұрын
Do the lights work?
@cerogravity8653
Жыл бұрын
I wana do this with a 2014 SRT 8 superbee
@theylovenari9283
Жыл бұрын
What’s goin on wit the tube on the air filter
@michaelcorleone348
Жыл бұрын
Damn bro how much would you charge for something like this
@URL.HTTP.XVIDEOS.COM.
Жыл бұрын
Could you do the rear end too? I feel like the trunk rear bumper and taillights would convert too
@unreleasedmusic1410
Жыл бұрын
I hope so I never seen the back get converted
@chevissuraimu7656
Жыл бұрын
yeah you can thee was somebody on a charger forum who did it but you need somebody who good at body work because your gonna have to cut your fender on the older gen because where the bumper is places is different
@JLNDWSN
Жыл бұрын
Idk idk not to be rude but atp you should just buy the newer car …. The front end was a smart modernization move I think widebody ? But to change the whollle generation like come on let’s appreciate its beauty I like it ….
@JLNDWSN
Жыл бұрын
Rear end swap on that magnum 😍😍
@korex7532
Жыл бұрын
@@JLNDWSNits a lot cheaper I have a 2013 I bought for 4k and I sold front end for 800 and it cost me 1k for front end of a 2022 scat
@LeeFalduto
Жыл бұрын
how did you get the lights to work, mine are very dim?
@nocturnal5540
7 ай бұрын
This looks hot all the way around 🤧
@shiesty392
Жыл бұрын
Bro I wanna do this to my 06 but don’t wanna buy all the stuff an waste money, is the headlights actually fit into place decent? What was the hardest part of this task yo?
@Custom_MoparBuilds
Жыл бұрын
You won’t waste any money only thing that was hard was the headlights
@Custom_MoparBuilds
Жыл бұрын
The headlights fit it took me longer because it was my first time
@Whyyoumadcuz__
Жыл бұрын
@@Custom_MoparBuildsWho can i goto to get swap on my Rt
@LuxuryLaneLegends657
Жыл бұрын
Tuff Brodie 🔥
@Custom_MoparBuilds
Жыл бұрын
Glooking broski🖤
@ppompilus
Жыл бұрын
nice
@StayBlaziin
Жыл бұрын
Did you need the radiator support from the new charger as well?
@MuddyKidd254
7 ай бұрын
How did u make the headlight fit 💀been trying in person do I gotta break sum?
@REALMEX816
6 ай бұрын
you need the radiator support from 15-22 charger
@SGKMIKEY
Жыл бұрын
Keep going
@sopranosmoov870
Жыл бұрын
Where did you order you parts from and how much??
@kingswayoflife3948
Жыл бұрын
Most likely stolen
@dvii24dd
Жыл бұрын
Great job gang
@raine5310
Жыл бұрын
How did the fenders line up with the doors?
@Custom_MoparBuilds
Жыл бұрын
You have to do a little adjustment but they fit perfectly
@Game-ZoneYT
Жыл бұрын
good job keep it up 🔥
@geetoss681
Жыл бұрын
Hard🔥🔥
@Custom_MoparBuilds
Жыл бұрын
Glooking broski🖤
@costargaming9439
7 ай бұрын
None of these parts lined up it’s all sitting on the car the only thing that looked attached was the fenders and bumper you can do a conversion but by the time you could you might as well bought the car he’s trying to convert to
@walkingrazor863
6 ай бұрын
Soon as I seen the title, I said 😒NO FUCKIN WAY👀👀👀👀… been thinking about trading this ugly ass Charger I got for something else, but I watched the video and became a believer. 🫡Now I’m motivated to keep my shit (it’s paid for) and follow everything you doing. And I’m subscribing ✊🏾
@walkingrazor863
6 ай бұрын
Oh yeah.. what’s the part number for the wheel adapters you using to get them dodge rims to fit?
Пікірлер: 123