In most of the cases have seen ,when it does that it simply means there is low power supply ,first check ur battery voltage,before you do anything ,its during starting thats when much current is drown by the starter motor.
@jamesdriver0317
6 ай бұрын
The cluster looks like the 2008 Blue Bird Vision
@_.gachatubeoffline._4565
2 жыл бұрын
I got an 05, but it started with a screw driver on starter solenoid and runs fine just no dash lights... But it did what yours done before I replaced solenoid but now I still don't have dash lights or power to ac... But when the solenoid went out it did exactly what yours did and another thing when the dash lights came on after releasing the key my ac blew great... Now with new starter solenoid I have no ac or dash lights but it starts on a dime and drives great... Any ideas???
@familymantrucking2131
Жыл бұрын
Maybe it’s in the comments. But what was the problem? Mine did the same and it turned out to be the negative battery cable. It’s was corroded. It had enough juice to power up but didn’t to turn it on. The simple things can drive us crazy and spend crazy $$. They say (especially up north) it’s good to change out your negative cable once every two year. A $20 cable can drive you insane.
@curtisholland3495
Жыл бұрын
It was the ECM man.
@jiggajenkins1397
2 жыл бұрын
Hey brother I have a question, so when you changed that computer out did that fix your problem? & also did you have to buy that brain brand new or was you able to buy a used one??
@curtisholland3495
2 жыл бұрын
Yes that fixed the problem. I bought a new one, and flashed it from the old one
@jiggajenkins1397
2 жыл бұрын
When you say flashed it from the old one what do you mean?
@curtisholland3495
2 жыл бұрын
You'll have to take the old ecm off and take the new one to a dealership to get it flashed (copied) from the old one. Unless you have the software yourself. That stores all the preset parameters from the old one, to the new one.
@curtisholland3495
2 жыл бұрын
When you buy a new ECM its empty, Used are programmed to another trucks parameters. You'll have to take the different ECM to a dealership along with the one that came off of it so they can flash it..(copy) So it's set up the same way the other one was.
@timc8570
9 ай бұрын
If anybody is out here listening
@jandrefelix3577
3 жыл бұрын
I have the same damn problem. Damn it I was hoping it wasn't the ECM
@curtisholland3495
3 жыл бұрын
If you have no power to your solenoid, it's most likely the issue.
@jandrefelix3577
3 жыл бұрын
@@curtisholland3495 Much appreciated. Will check!
@curtisholland3495
3 жыл бұрын
Remember if it's a 08 the solenoid is on the starter, Earlier they're on the driver side firewall.
@jandrefelix3577
3 жыл бұрын
@@curtisholland3495 Mine is a 04 with a cummins isx. So power does go to the solenoid (starter relay by cab) but it's not responding. I did buy another one and it still won't work. When I hot wire the solenoid placeholders, the truck starts but does not have an operating shifter. Just stuck in park.
@soolee4201
2 жыл бұрын
My truck is 2014. I had the same problem. I checked the voltage. It's over 12.5 V. I took off the cables from the batteries and reconnect. It was working again. It happened 3 times for a month. I replaced the battery bars, batteries and main battery switch. After replacing all of them, the problem was fixed.
@user-ie7sp3ij9c
2 жыл бұрын
Hey i have a 2012. Its doing the same thing and is giving me an error j1939 communication to ecu. Any help please?
@user-ie7sp3ij9c
2 жыл бұрын
Hey man my truck is a 2012. It was running fine with check engine on. I went on vacation for a week and when I try to start it the lights would come on, but it won’t crank at all. The only message i get it Maintenance required vehicle Ecu. And j1939 Communication error with Engine ECU. Please help me out with this if you have any idea what could it be
@timc8570
9 ай бұрын
@@user-ie7sp3ij9c what did you do ?
@user-ie7sp3ij9c
9 ай бұрын
Replcaced ECM
@timc8570
9 ай бұрын
@@user-ie7sp3ij9c and it has to be reprogrammed ?
@bikerboy2k142
3 жыл бұрын
Who did u get your new ecu from for only a grand? Volvo quoted me 2500...
@curtisholland3495
2 жыл бұрын
TTT in Warsaw NC. I've bought all my parts there for yrs. So I almost pay what they pay.
@williamherrera1496
3 жыл бұрын
I have the same problem. How much did you pay for the computer?
@curtisholland3495
3 жыл бұрын
Make sure your solenoid is not getting power when you try to start it. ECM was around 1k with reflash
@williamherrera1496
3 жыл бұрын
You saved me some cash. Thanks
@curtisholland3495
3 жыл бұрын
No problem man. Have a great day.
@terencejulien1554
Жыл бұрын
I have the same issues but my cluster lights doesn’t click off like that do you it can still be the ecm?
@user-ie7sp3ij9c
2 жыл бұрын
Hey man my truck is a 2012. It was running fine with check engine on. I went on vacation for a week and when I try to start it the lights would come on, but it won’t crank at all. The only message i get it Maintenance required vehicle Ecu. And j1939 Communication error with Engine ECU. Please help me out with this if you have any idea what could it be
@curtisholland3495
2 жыл бұрын
See if you have fire at your starter solenoid, say when you turn the key have someone check and see if the wire to the solenoid is getting the proper 12 volts.
@user-ie7sp3ij9c
2 жыл бұрын
@@curtisholland3495 yes i do
@curtisholland3495
2 жыл бұрын
Replace your starter solenoid on the starter. But take pics before you take the wires off.
@user-ie7sp3ij9c
2 жыл бұрын
@@curtisholland3495 ecm was the problem
@curtisholland3495
2 жыл бұрын
@@user-ie7sp3ij9c Great at least you figured it out.
@seyawashazad5380
Жыл бұрын
So where is the computer has located bro ? You didn’t show where the fkg computer has located?
@jasonwilliams5494
2 жыл бұрын
How much was the computer
@curtisholland3495
2 жыл бұрын
I paid 1k plus reflash. Which was about $1400 total
@duqrush1
2 жыл бұрын
You could barely move it to start position and will start. If you do it all the way the power will switch off
@reneleal2725
2 жыл бұрын
Thank you that worked when I did it
@elmahimo1787
2 жыл бұрын
How please I have this problem with 2007
@timc8570
9 ай бұрын
Please somebody help me
@trollstar5418
2 жыл бұрын
Prime the fuel
@curtisholland3495
2 жыл бұрын
On what?
@yb8346
Жыл бұрын
I had the same problem. Tapped the starter and it started...I guess it time for replacement.
@curtisholland3495
Жыл бұрын
Come on man.. I've been doing this shit for yrs.. I'm sure I'm smart enough to see if I even have power to the starter once the ignition is engaged. I did not have power. So beat the starter all you want.. Haha
@yb8346
Жыл бұрын
@@curtisholland3495 my reply was not to you but for people reading it that might not know the trick if they have a bad starter. Your video is 👍
Пікірлер: 51