@@DEADINSID3. you can order them off G8only.com from Joe or BTR website and they’ll show you local dealers as well
@enriqueochoa4
Ай бұрын
sounds badass! did you dyno tune it? what numbers you making? I´m planning to build a 6.0 with this cam🤙
@motamobb
Ай бұрын
@@enriqueochoa4 I went with @nufnuffz28 on the remote tune since they’re in Tennessee and I’m in Texas (maybe one day I’ll visit) they had a lot of similar setups and were pushing up 450 hp . I’m still stock heads and bottom end so I’m well below it
@enriqueochoa4
Ай бұрын
@@motamobbfirst of all, thanks for your answer. That´s great, I´m planning to put ls3 top end (heads, intake and tb), this cam, and now bc of you, the btr v2 trunnion kit haha, so Im expecting to do somewhere around 420ish whp. so thank you, this cam might achieve that. Also, what stall or torque converter are you running, or what size your tuner recommend?
@motamobb
Ай бұрын
@@enriqueochoa4 I’d get a 3200 if you plan on driving it hard! I’m on stock stall but that’s my next game plan is that stall
@enriqueochoa4
Ай бұрын
@@motamobb is going to be mean! post another video when its done and thanks man!
@motamobb
Ай бұрын
@@enriqueochoa4 yeah man will do! 🤘🏼 she’s getting a paint job next I’ll post that too
@JayHartMusic
8 ай бұрын
🔥🔥🔥 sounds dope bro what size push rods? stall? thinking about getting this cam for my 6.0
@motamobb
8 ай бұрын
Appreciate it! Thanks! I’m running stock length 7.400” BTR chromoly .080 5/16. Stock stall for now I def need to go like a 3200 one day . Drives good for stock stall but I surges randomly at the red light but not terrible. My wife daily’s it . Got my stuff from Joe at g8only
@JayHartMusic
8 ай бұрын
ahhh ok yea def get a stall then and ty so much I'm thinking about getting this cam, did you take her to the track yet?@@motamobb
@motamobb
8 ай бұрын
@@JayHartMusic no not yet! I might take her out to a circuit track and do some pulls on the straight away there
@JayHartMusic
8 ай бұрын
ok dope @@motamobb
@Mechanic83
6 ай бұрын
@@motamobbare u still on stock stall ?
@LS3_Capri
2 ай бұрын
Did you have to do valve springs?
@motamobb
Ай бұрын
@@LS3_Capri I did for safety and the trunions too. I’d hate to be at high rpm and they fail. Since the heads were off I went ahead and did it! Went with the BTR .660 platinum spring kit with titanium washer and the V2 BTR Trunions and chromoly pushrods
@LS3_Capri
Ай бұрын
@@motamobb thanks! What do you think of the cam?
@motamobb
Ай бұрын
@@LS3_Capri I love it! I do wish I could bring the rpm up at but out of idle for the red lights since I’m on stock stall but it drives great around town and sounds stupid mean. My wife drives the car to work everyday and definitely drivable and rips when you need it too
@LS3_Capri
Ай бұрын
@@motamobb great. Thanks for the reply. I’m currently on the GM hot cam here in the UK as I bought it as a crate engine. Thinking of swapping to double springs and this cam and a remap. Mine is manual so no stalling problems hopefully 🤞
@1fake_ls3
Ай бұрын
You from tyler?
@motamobb
Ай бұрын
@@1fake_ls3 yesssirrr
@1fake_ls3
Ай бұрын
@@motamobb i’ve seen you around town a couple times, car sounds and looks great 👍🏽 what exhaust setup are you running
@motamobb
Ай бұрын
@@1fake_ls3thanks! They’re kooks long tubes straight pipe true duals, and magnaflow glasspacks basically haha you got a g8?? Is there the with one in your pfp? Idk if I’ve seen it yet
@1fake_ls3
Ай бұрын
@@motamobb are you running a stall with that cam? And yeah thats mine i saw your car last time at the oreillys’ on front st about a week or two ago
@cantducknoslug
7 ай бұрын
what size tires are u running?
@motamobb
5 ай бұрын
Sorry I missed this 305/35/19 in the rear and 275/35/19 in the front
@markussimmons3130
10 ай бұрын
That's the cam I want how much did it cost for your set up I have a 09 jus headers xpipe cia and tuned
@motamobb
10 ай бұрын
Nice! That’s what I had for awhile until the DOD went out so I had to do all this. I went with Joe at G8 only got his dod delete kit with btr v2 trunnion upgrade, caddy ls7 lifters, melling high volume high pressure oil pump ; I did it all myself to save labor but in parts I was out like close to $3k .
@DEADINSID3.
8 ай бұрын
@@motamobbdoes that car pull hard with that cam? Im thinking about putting it in my 06 gto
@motamobb
8 ай бұрын
@@DEADINSID3. yeah man it def does . It pulls hard throughout the rpm I love it. @nufnuffz28 has a lot of videos of them doing red hot cam swaps on dynos making good power on full bolt ins
@DEADINSID3.
8 ай бұрын
@@motamobb awsome thanks buddy and i just literally got off the phone with brian himself and he said this cam in a g8 6.0 with ls3 heads full exhaust intake and e85 car made 478rwhp thats a roudy cam! Im sold i am buying it today
@motamobb
8 ай бұрын
@@DEADINSID3. that’s a solid number! yeah ls3 heads with the hollow stem valves make a huge difference. Def want to do that next
Пікірлер: 41