Dude that is sick! Great demo of its capabilities! I had no idea that thing was that heavy!
@thatsmyrc
3 жыл бұрын
thanks Axio, yea I got to make sure I stretch before I decide to lift this bad boy off the rc table to take it outside to run. Being a old fart at my age might get a hernia or blow my back out lol. Got to stay in shape just to play with Rc's lol
@gerrysoldguyreview
3 жыл бұрын
Now thats just showing off!!😅 Rude!! Getting loaded on your own trailer, seeing it pick up a propane bottle really shows its strength!! Great video ron😁😁
@thatsmyrc
3 жыл бұрын
LOL ;-). yea a bit flexing its strength. I was lifting hemtt on the trailer also not on video. The down side to that was the rear of loader was wanting to lift from ground, but it was still was lifting the two up in air, yet counter weight of the two out weighed the rear of loader.
@satorrotas
3 жыл бұрын
I didn't think it could carry so much weight, it doesn't force mem, really great !!
@thatsmyrc
3 жыл бұрын
Thanks Sator its impressive It could lift the trailer w/ hemtt on it yet the back end of loader wants to lift..I was giving it a go also lol..
@satorrotas
3 жыл бұрын
@@thatsmyrc 😊👍
@The-Warm-voice1359
3 жыл бұрын
very wonderful video👌and strong💪
@thatsmyrc
3 жыл бұрын
thanks again buddy
@pnwRC.
3 жыл бұрын
EXCELLENT video Ron, that does a fantastic job of showing just how incredibly strong these miniature machines actually are! I wish I had though of moving a propane tank. EVERYONE can fairly well relate to the weight that this machine was moving, when they see that tank on the forks!
@thatsmyrc
3 жыл бұрын
Thanks man, I was going to lift the trailer w/ hemtt on it yet forks couldn't get the sweet spot for balancing and the rear of loader wanted to lift, yet it was still chugging along wanting to lift it up. should of just cheated and used my foot to hold rear of loader lol
@euroboyrc
3 жыл бұрын
Nice Video. Ive been thinking about buying this loader myself and your Videos are very helpfull. Thank you
@thatsmyrc
3 жыл бұрын
Thanks I am glad this can help, it is a very powerful loader, out of box personally the channels on receiver needs to be rearranged around in which I did do. making driving this loader so much smoother..
@antrc
3 жыл бұрын
What the? Headed straight to your channel after your ktm race box comment. First video and I am hooked. Subbed. I cannot believe what this thing can lift. I love the idea of having a decent construction rc on our Cross rigs. But they are so expensive. This is a beauty.
@MaxeeOffroadRC
3 жыл бұрын
Excellent 👍#24 Nice Video my friends 🤜🤛
@stephenpico
3 жыл бұрын
Very strong construction RC wow!
@thatsmyrc
3 жыл бұрын
Thank you for checking video out and commenting
@RCBrothersLk
3 жыл бұрын
wow... What a powerful rig. Nice video bro.
@thatsmyrc
3 жыл бұрын
Thanks its a nice unit
@carloshnunez
3 жыл бұрын
Wow, that loader is awesome and heavy to be able to lift that load
@thatsmyrc
3 жыл бұрын
thanks bud it weighs just under 50lbs itself without a load
@RCVHX22
3 жыл бұрын
That's a super vide my friend thank you for sharing 👊😜👍
@bruteforce6570
3 жыл бұрын
Cool forks man👏👏I ordered mines.. I was subscribed to your channel but for some reason I wasn’t I guess I unsubscribed by mistake but we’re back. Cool video as always.
@thatsmyrc
3 жыл бұрын
hey Bud cool that you ordered the forks. Its impressively heavy the fork system itself. its a nice option for these rigs. I would like to try out a 3d printed bucket. Don't know of anywhere where I can order one etc? reason why is that the bucket is so dang heavy if I was to have a 3d printed bucket it would be able to pick up that much more and be lesss overkill on the hydraulics..Let me know if you know of anywhere..
@bruteforce6570
3 жыл бұрын
@@thatsmyrc I have no idea where you can get one man sorry. it would be nice if Rc4wd made different ones.
@hellorc7678
3 жыл бұрын
Seriously impressive!😳
@thatsmyrc
3 жыл бұрын
its a tuff loader thanks man
@ozboy8144
3 жыл бұрын
ooooh Man! that's got some serious power👍
@thatsmyrc
3 жыл бұрын
Thanks Ozboy its a beast
@mpkhobbyRC
3 жыл бұрын
Man you had me at lifting the (empty?) Gas bottle!!! So call me a fool but what about 2 nickle metals? One for each esc? Ps ur kid was right! Perhaps teach him the triangle rule or rule of thirds.. hes got a good eye!
@thatsmyrc
3 жыл бұрын
thanks man it did have some gas in it. I could of lifted it all the way up but with that I was afraid that it might flip over doing damage to the loader.. If you did 2 nimh the deal with that is then thats 2 batteries to shove under the hood. In which those 2 batteries would have to be small enough to fit, giving that they wouldn't hold much charge time. But imagine one could try anything they wanted to do. I have no scares about lipo's just got to treat them correctly and do the research. have you got yours 870k up and running yet. I had changed the transmitter functions up also. all my bucket/ lift etc are on the left stick and drive steer is on right as it should be. buttons on back 9ch runs my options on my strobes.
@rcrelatedstuff6092
3 жыл бұрын
Man that whee loader is so nice. I hope you will make more in depth videos of it. Subbed
@thatsmyrc
3 жыл бұрын
Thanks man I've got it just about where I want it in setting up the controls to adding sound and strobes and forks.. I still need to mix the channels for pump on demand but I am in the middle of building a cross rc rig..
@user-Predator1726
3 жыл бұрын
Hello friend ! Méga power!!!👍👍👍
@thatsmyrc
3 жыл бұрын
thanks buddy
@scaleRCworld
Жыл бұрын
Haha yesss!! Now this is power 😎
@thatsmyrc
Жыл бұрын
thanks for checking it out
@soaringkhaled
Жыл бұрын
That's a monster !!
@thatsmyrc
Жыл бұрын
thanks its very powerful
@DestructionRC
3 жыл бұрын
holy crap! didn't think that would work out haha
@thatsmyrc
3 жыл бұрын
sorry for delay trying to catch up to date. Its a beast and it can lift even heavier objects. This was not a challenge for it..
@jdpaslRC
3 жыл бұрын
You should do Loading game like RC Sparks did.
@thatsmyrc
3 жыл бұрын
Then I'll need friends to drive multiple units, I don't have any friends it Keeps life simple that way lol
@jdpaslRC
3 жыл бұрын
@@thatsmyrc Invite me hahaha.
@The-Warm-voice1359
3 жыл бұрын
hello mr how you doing i need your help please i have 2 problem.? first problem i have trouble with bucket servo he tremble when he tremble the bucket tremble 2 like As if he was cold l😂l and my problem no.2 i want do on demand pump how if you have any idea about the servo how can fixed him tell me and i hope you learn me how can do on demand pump step by step thx again dude
@thatsmyrc
3 жыл бұрын
if its not leaking oil my guess either you have either a servo coming off the pump thats going out or possibly kink in the line? Have you checked the servo movement visually, or possibly the end points of the channel on that servo? all a process of elimination. Got to dig in to find out..
@The-Warm-voice1359
3 жыл бұрын
@@thatsmyrc yeah you are right dude i think he needs some adjust from the remote
Пікірлер: 49