I am an engineer and i admire your skill and pasion thank you for the entertainment Ron
@boostjunkieMike
3 жыл бұрын
Another great build, love the colors.
@ralphhowing3473
4 ай бұрын
Bob, you are a master Sir, just one thing though, you've added even more things to try and remember on the transmitter!!!
@mikeking2539
3 жыл бұрын
Just got the Tamiya flat bed trailer, Easy to do, completed it over a couple of evenings. Love how you put the lights in. Works really well.
@vman245
3 жыл бұрын
Can’t wait for more Beier SFR-01 videos! Your the master builder!
@thebat6900
3 жыл бұрын
globe and flatbed look great bob really intrested to see how you turn a stock flatbed into a lowboy also a idea show how to make a drop deck from a stock trailer kit and maybe a stretched box trailer just some ideas keep up the awesome job and awesome videos.
@G3516dude
3 жыл бұрын
This is an awesome and very thorough video, very nice work👍🏻👍🏻
@nhansme
3 жыл бұрын
Thank you so much for this very helpful video Bob. Both truck and the trailer look absolutely fantastic 😍😍
@LTD347
3 жыл бұрын
I thought today. It would be cool if you could set up a linkage off the trailer landing leg mechanism to the electronics switch, so when you attach the trailer and the landing legs go up it also turns on the trailer lights.
@charlessmith6636
3 жыл бұрын
Great enjoyable build as always , would like to build the trailer but are they being shipped in the US or other countries
@bobwieland7887
3 жыл бұрын
I love this stuff but I'd go broke in a heartbeat because once I got started I would be able to stop or be satisfied with just one or to builds, you have the talent for this and your gifted with that
@jesse94970
3 жыл бұрын
Bob, In Australia the blinkers are on the out board side then the brake and the tail light and it is a very good build, thank you
@stephenmanley4097
3 жыл бұрын
Brilliant build Bob on the tractor & trailer, just goes to show what can be done on budget with creativity & thought. 👍
@tomedmunds932
3 жыл бұрын
I use only 1 double sided tape on the last cross piece( at the back) to secure the deck. That way if you need to get under the deck, removal is easy and doesn't damage the wood. The load will keep the deck down!
@ralphhowing3473
9 ай бұрын
Didn't it warp? Even if is' inside all the time the wood is going to buckle!!!
@andyrichey1192
3 жыл бұрын
Wow turned out beautiful ! The lights are awesome, appreciate you sharing. I watch for more
@tonys4250
3 жыл бұрын
I got the flatbed and started putting it together. In making sure I had the bed the correct way I didn't notice I put the king pin plate on backwards so the center hole was up front I guess we all make mistakes. I did the wireless lights and side marker lights the same as you did also added the Motorized leg kit. I put pictures on your Facebook page.
@stuartbrown3890
3 жыл бұрын
Another great vid Bob how's the puppy doing?
@HobbyconceptsLLC
3 жыл бұрын
He just chewed through my laptop power cable so he is in the DOG HOUSE for sure!
@jonjacob1962
2 күн бұрын
Those are not wireless lights. They're just lights, with a wireless controller and onboard battery...
@tonys4250
3 жыл бұрын
Great video Bob as always. i decided I'm going to get the flat bed trailer. I like painting the same color as the truck and staining the wood I will do the same too. I was hoping you used the Motorized legs
@RC4X4
3 жыл бұрын
Very Cool. I would of never though about doing this. I think I need to do my trailers wireless.
@HobbyconceptsLLC
3 жыл бұрын
Works quite well. Also works with the Spektrum DX6e.
@mrdookiepotpie
3 жыл бұрын
My Flatbed Deck never looked that good and new...lol
@TX010
2 жыл бұрын
Bob you are king 🤴! Great 👍Thanks 🥃👍💪
@janarthanamsubramaniam
4 ай бұрын
Hi Bob I have trouble binding the 2 Flysky FS-IA6B receivers with the Flysky tranmitter at the same time. Either one is bind and the other don’t. I have tried several times and I can’t get the receivers to bind together. Any tips?
@LawrenceGiordano-qo4ug
Жыл бұрын
Hi Bob, I have FS-I6X transmitter, 3 FS-IA6 receivers can only get two to bind ,what to do?
@donpeterson1352
2 жыл бұрын
I cannot get my radio (spektrum ds6e) and my 2 ar620 recievers to bind together. I've tried everything. Anybody have an answer?
@normandlarocque1337
3 жыл бұрын
Hello I would like to know please what is the voltage for the leds of the multifunction mfc-01 I would like to install others but I was wondering what was the voltage distributed at the output of this device given that the battery is 7.2 volts
@ralphhowing3473
9 ай бұрын
Being a wood warier, I'm curious that even though it's just a small modal and wood expans and contracts if the air has a little moisture wouldn't the wood warp? should have spaced the joints!!!!
@delfell6678
3 жыл бұрын
Love your builds I’m learning loads thanks
@razycabrones
3 жыл бұрын
Great job another great build you are one of the best thank you for all your advice
@nsvaluto48328
2 жыл бұрын
Can you please answer a question re this trailer? I would like to know which parts bag is the king pin part I'm trying to find a spare one thanks
@douglashagey1579
3 жыл бұрын
Great videos , love watching all of them.
@courtneygnik8466
3 жыл бұрын
If I want to show my husband how to build an rc truck, this is the channel I pull up.
@crichton2121
3 жыл бұрын
Another good video Bob you make it look easy.
@grrigsby8125
2 жыл бұрын
When are you doing the lowboy build if you don't mind me asking?
@damnyankee656
6 ай бұрын
Another great very informative video work lots of detail
@ianheadland6939
3 жыл бұрын
I built the Pole trailer and the bearings were Nylon!
@50dnewbe
Жыл бұрын
Just ordered all my parts from you!! Thank you for all the great videos!!
@sharplescentral7247
3 жыл бұрын
Hi bob Great video as always, just completed the flat bed trailer myself, and i stained the deck boards as you did, it looks great. Just wondering when you will be doing the flat bed trailer lowboy?
@dkier81
23 күн бұрын
I have the Radiolink AT10II 12 Channels RC Transmitter along with the Beier SFR-1, will this setup work with that? Doug
@HobbyconceptsLLC
21 күн бұрын
If you have the Beier SFR-1 you are better to use the Beier IR or BT trailer units.
@colinjohnpack3105
6 ай бұрын
I like that kit very nice but my one will be in orange and yellow
@TimrcintheworksonInstagram
3 жыл бұрын
Great match up with tractor & trailer and I like how you did the marker lights and made it wireless great design really enjoy your tutorials Bob keep it up
@michaelchristianson3179
3 жыл бұрын
Bob, are you going to install a sound unit on this particular truck?
@fernandomoura1604
11 ай бұрын
parabéns.....muito bacana...vou montar a minha....
@flatbedtruckergaming2974
3 жыл бұрын
I love the lights you added
@JF-RC
3 жыл бұрын
Hi, been looking at Addam’s Playground and he mentioned your channel. I’ve got a Scania R620, trailer and MFC-03 unit and will be looking forward to building my truck. But thought I’d take a look at your channel. Wow! Your attention to detail is amazing. The blue looks great and compliments your tractor unit nicely, the detailing of how you installed LEDs wirelessly using a twin bound receiver is excellent. The wood staining looks beautiful and I’ve learnt a lot, even down to using a muffin tin, labelled for the screw bags, great idea.😉😊. Anyway, I’ve subscribed, thank you for sharing with us, take care and keep well. 😉
@HobbyconceptsLLC
3 жыл бұрын
Thank you for watching!
@michaelchristianson3179
3 жыл бұрын
Bob. I have become addicted to your channel. You are a true master of the hobby. I wanted to share an idea with you. Perhaps you could find a chrome trailer tool box big enough to hold the batteries. I thought that would be trick. I'm going to buy my first truck this week. The Globetrotter Tow Truck. Why not jump in all the way? A few options I want are on back order like the MFC unit and the actuator kit. Do you offer help and advice? Thank you for all you do for this great hobby.
@HobbyconceptsLLC
3 жыл бұрын
Thank you for the nice comments. Love to help you out anytime. email jacobsenra@hotmail.com
@fergonfer3951
Жыл бұрын
Your video about the installation of the light module was of great help to me and solved a problem that I had been trying to solve for a long time. I just wanted to thank you.
@HobbyconceptsLLC
Жыл бұрын
Happy to hear it helped!
@awesomusmaximus3766
3 жыл бұрын
I use a Servonaut transmitters and IR receivers on mine that way i can use any truck on any trailer
@yamahaking6137
3 жыл бұрын
Beautiful combo.. very nice work
@86monte98ponti
3 жыл бұрын
Glad that you pointed out your build error on the deck. Easy to miss. You could have easily just kept that out, but its important to keep in to show mistakes can happen. Dig your Starfleet mug.
@HobbyconceptsLLC
3 жыл бұрын
Oh yeah, I make plenty of oops!!
@javi0000057
2 жыл бұрын
Hi bob, I have your modded FS-i6x transmitter and can’t get the i6a receivers to work . Will it work only with the fs-i6 ?
@HobbyconceptsLLC
2 жыл бұрын
The i6a receivers will work with the FS-i6x.
@tcnw2005
3 жыл бұрын
Cant wait to see the low boy conversion video!
@BattleshipOrion
3 жыл бұрын
So here's a question from a beginner; what truck & trailer do you recommend? I've seen Scania & MAN from forums, but im looking for something more American & less European, and something not as grand as the Grand Hauler.
@HobbyconceptsLLC
3 жыл бұрын
Everyone has an opinion but my all time favorite is still the King Hauler.
@BlueDually4x4
3 жыл бұрын
Ford hasn't made the Aeromax in real life for a long time, but it is a pretty good looking truck.
@sughosh100
Жыл бұрын
This is fantastic video showing the wireless connection. Thanks Bob! Is it possible to bind and control the trailer legs as well?
@HobbyconceptsLLC
Жыл бұрын
It would be possible but the Tamiya motorized legs sure do nut have any requirement for it.
@felipesanchez6485
Жыл бұрын
Hi excelent, i would like to know if you have to leave turned on both? ( what happen if you turn off one ? You have to restart both?
@HobbyconceptsLLC
Жыл бұрын
When you turn off one or the other it has no effect - still works after.
@BlueDually4x4
3 жыл бұрын
I enjoy watching you build kits, informative and relaxing. On the light kit, would it be possible to power beacon lights or strobes? Going to have to order some parts from you come payday for my Bruder snow plow conversion.
@HobbyconceptsLLC
3 жыл бұрын
Yes, you could power beacons, flashing LEDS's etc just fine.
@michaelchristianson3179
3 жыл бұрын
I think there is a company called RAM that makes such lights.
@rapscallion3506
3 жыл бұрын
You look like you enjoy what you do, learn and teach. Thanks.
@kevint6989
3 жыл бұрын
Love your videos . I am currently converting this trailer kit into a nascar style race trailer. Some dropping and stretching going to happen . This light kit setup is perfect. I run the spektrum DS6e , is it the same process to bind a second reciever on this unit?
@kevint6989
3 жыл бұрын
Well just put in my order !!!
@HobbyconceptsLLC
3 жыл бұрын
Yes, binds the same. Just do both receivers at the same time.
@tommyli1695
2 жыл бұрын
I am using flysky i6s but i cannot blind 2 receivers at the same time
@HobbyconceptsLLC
2 жыл бұрын
Only the iA6 receiver will do this. The i6B receivers or 10 channel receivers will not work.
@spidubic68
3 жыл бұрын
Two questions. First. Any idea how many lights you can put on the one channel? Was thinking of 20 on one of my trailers. Second. Can I bind the truck and two trailers at one time? Then I can have two trailers with wireless lights.
@dionhutchins7300
2 жыл бұрын
Will this work with a mfc unit. For instance the indicators
@HobbyconceptsLLC
2 жыл бұрын
Yes it will. Turn signals work fine but not in sync.
@rudolphward4375
7 ай бұрын
Beautiful...
@rockchoppers8118
4 ай бұрын
Hello bob I can’t get my radio to bind both receivers at the same time as you have instructed I have the fly sky fsi6x transmitter and fsia6b receiver in the truck and light kit
@HobbyconceptsLLC
4 ай бұрын
Only works with the iA6 receivers. The "B" receivers will not work.
@rockchoppers8118
4 ай бұрын
Great I'll have to order those Both need to be a rec ? Thix Bob
@garymurphy5133
3 жыл бұрын
great vid,with lots of info. never knew you could have 2 receivers working at same time with the same tx!
@francisroy8716
3 жыл бұрын
It work very well whit Flysky i6....only!
@garymurphy5133
3 жыл бұрын
@@francisroy8716 Really? no other TX will do this?
@francisroy8716
3 жыл бұрын
@@garymurphy5133 Some yes ....but very $$$$$$....Turnigy Is same as Flysky I try whith I6s...but whitout succed
@HobbyconceptsLLC
3 жыл бұрын
I works fine with a DX6e - just tested it. You must bind both receivers at the same time.
@chrismills4233
2 жыл бұрын
Hi Bob, my names Chris. And I had gotten a tamiya globeliner, and a flatbed trailer, and I can't get both to bound at the same time. Do I have to use two six channel receivers, because I have a 10 channel in truck and a six on the trailer, and I can't get them to bind. Don't know what else to do. Thank you and I hope to hear from you soon. Thanks again Bob, and I love your channel!!!
@HobbyconceptsLLC
2 жыл бұрын
It only works with the i6a receivers. The 10 channel or the "b" receivers will not work.
@javi0000057
2 жыл бұрын
Hi bob , I have your modified fs-i6x radio and having trouble getting the two i6a receivers to bind together. Is the i6x capable to do this ?
@dionhutchins7300
2 жыл бұрын
On the trailer where do you put battery plug into
@HobbyconceptsLLC
2 жыл бұрын
Battery hooks to on/off switch
@roblessalvatierra9389
3 жыл бұрын
Is this. Truck. For sale???
@HobbyconceptsLLC
3 жыл бұрын
hobbyconcepts.net/collections/custom-built-trucks
@toneysunny9283
2 жыл бұрын
DO the receivers have to be the same model?
@HobbyconceptsLLC
2 жыл бұрын
Yes, and only the i6a receivers will work.
@gear21clothingco.75
3 жыл бұрын
Beautiful Build.
@lenniewire8029
3 жыл бұрын
That is a nice build combination .the only thing is ,arent the trailer landing legs too far b ack ?
@Doug_Morgan
Жыл бұрын
I would love to get two of these kits and make a 45' or 48' trailer out of them. The kit is only about a 32' deck. I was thinking a guy should be able to cut the wide part of the frame out of one kit and splice it into the other. Then splice the side rails (or buy some aluminum angle and make new ones) at a different point for strength as well as the deck. A guy could always by a dolly and make a train out of them as well.
@HobbyconceptsLLC
Жыл бұрын
Easy to build a long trailer out of 2 of these. Also you could make it a triple axle. I did something similar on my Hemtt trailer build. (see my older videos)
@Doug_Morgan
Жыл бұрын
@@HobbyconceptsLLC Yes I was just looking at that. I also found where someone had stretched their kit to 53' using only one kit. They did make new side rails but did not extend the frame underneath. Seeing the construction could easily do it with one kit, some 1/2 angle and some sheet aluminum.
@rosemohr9061
3 жыл бұрын
hi can you send me a tamyia semi truck the truck i wont is a globe liner
@6ickness1
2 жыл бұрын
just ordered this hopefully i can build it .... great job
@jimc12
3 жыл бұрын
The middle led marker lights. You should tie those into the blinker for the blinker on the side of the trailer.
@rogerlove4805
3 жыл бұрын
Hey there, truck and trailer look great. But being from Australia I don't understand why Americans and Canadians cannot pronounce "SOLDER"! The word has an "L" in the middle which is not silent. It is not "SODDER". You cannot understand aggravating it is to listen to mispronunciation all the time. Sorry about the bitch, but it's annoying. Cheers, and keep building thanks.
@HobbyconceptsLLC
3 жыл бұрын
Ha! Thank you for watching. I don't understand G'day either so we are even!!
@normandlarocque1337
3 жыл бұрын
Bonjour j aimerais savoir svp quelle est le voltage pour les leds du multifontion mfc-01 j aimerais en installer d autres mais je me demandais quel etais le voltage que distribut a la sortie de cette appareil etant donner que la batterie est de 7.2 volts
@leegoldeneagle9003
3 жыл бұрын
So. 😎. Never. Do. It. But. Watching. U. I. Now. Me. That
@triple87864hh
3 жыл бұрын
How much is this build with painted trailer?
@christophergibson8377
2 жыл бұрын
What does the 55 turn moter do
@HobbyconceptsLLC
2 жыл бұрын
Slower speed and more power. The stock kit motor is way to fast.
@dutchmikey1
2 жыл бұрын
I have the flysky i6x and was wondering if the second receiver that goes in the trailer has to be the same as the receiver that is in the tractor? Like can I have the fs-ia6b 6 channel in the trailer and the fs-ia10b 10 channels receiver in the tractor?
@HobbyconceptsLLC
2 жыл бұрын
The 10 channel receivers will not work. Only the 6 channel.
@paulmaybury5700
Жыл бұрын
Yet a fab video on how to bill a trailer bob you inspire all
@blairg420
3 жыл бұрын
Hi Bob, nice job! Wondering, do you think this wireless setup would work (binding 2 Rx) with an MFC-01 in the truck? Thanks
@HobbyconceptsLLC
3 жыл бұрын
Yes it works fine. The blinkers however run at different rates.
@MrBiplaneflyer
3 жыл бұрын
I did the same thing on my build I did the same thing on my build
@teeyungfan4654
3 жыл бұрын
Hello. Just want to know if want to do this wireless trailer light what items I need? Can you let me know..? Thanks
@HobbyconceptsLLC
3 жыл бұрын
You need a light kit, battery holder, switch and receiver. Only works with some radios and receivers - for example will not work with Flysky 10 channels, only the 6 channel.
@dennisfreitas7675
3 жыл бұрын
The light kit you used what is the part number?
@jeffhowe1120
3 жыл бұрын
Hi where is the link for the decal chap?
@spidubic68
3 жыл бұрын
Does this only work with the FS-IA6 receivers? I bought two Flysky FS-IA6B receivers as that was the only thing my hobbyshop had and they are not working together. I can only bind one or the other. Not both. Or is it my radio? Just realized I have anm FS-I6X not an FS-I6. Will that make a difference?
@HobbyconceptsLLC
3 жыл бұрын
Only works with iA6 receivers the "B" receivers will not work. Not sure about the transmitter.
@spidubic68
3 жыл бұрын
@@HobbyconceptsLLC Thank you for the clarification. Although not the answer I hoped for.
@turborock7464
3 жыл бұрын
I am very interested in wanting to do this being I deal with nitro Rc's however I am asking for some help and assistance in obtaining my first rig if it's possible
@turborock7464
3 жыл бұрын
Plus I'm a single father on a budget
@sharplescentral7247
3 жыл бұрын
Hi bob can I ask where you purchased your amber marker lights from for the trailer?
Hi Bob, did you add any primer on the aluminum before you painted it? Any chance that the paint may peel off?
@HobbyconceptsLLC
3 жыл бұрын
I primed it, but anodized aluminum is hard to paint. It does scratch easily.
@shows01
3 жыл бұрын
how much weight could you haul with this?
@alexhtanmair1144
3 жыл бұрын
Das ist nicht Gobol Liner, das ist Fredliner Argosi
@egdata1
3 жыл бұрын
Hi, kannst du mir verraten, wie die beiden Empfänger gleichzeitig mit dem Sender gebunden wurden ??? Rätsel !
@HobbyconceptsLLC
3 жыл бұрын
You need to bind both at the same time. Works fine with the FS-i6a receivers but will not work with the 10 channel receivers. Also works fine with Spektrum receivers. On Flysky units power up both receivers with the bind plugs in and then bind the transmitter. Next remove the bind plugs BEFORE you power down the receivers.
@andreroelofs5308
3 жыл бұрын
How many extra light you are able to add to the system for like more marker lights ? Great work!
@HobbyconceptsLLC
3 жыл бұрын
Probably up to 50 or so. I ran the numbers and it was like 250 but that would be pushing it.
@TCnML
3 жыл бұрын
Have you used the KNK Hardware on any of your builds?
@HobbyconceptsLLC
3 жыл бұрын
I have not.
@jerryebner159
3 жыл бұрын
Can you use the Tamiya light kit for the trailer?
@HobbyconceptsLLC
3 жыл бұрын
Yes, you sure can.
@RCWDA
Жыл бұрын
hello, does the light set have to be the same as the one from the truck?
@HobbyconceptsLLC
Жыл бұрын
No, in fact the truck does not even need lights for this to work. Only works with i6a receivers.
@RCWDA
Жыл бұрын
@@HobbyconceptsLLC thank you 👍
@RCWDA
Жыл бұрын
@@HobbyconceptsLLC i have a different set of lights for my truck like what i have for the trailer, that doesn't matter, right?
@michaelchristianson3179
3 жыл бұрын
6 people are jealous.
@jerryebner159
3 жыл бұрын
Hey Bob are you going to do a low boy trailer build
Пікірлер: 173