Silly Putty is my go to for masking paint. Cheaper and comes off with no issues, plus softer and more pliable that Blu-tack.
@scaleresurrectionmodeler7379
Жыл бұрын
Iv tried silly Putty before. What kind do you use?
@KaptingK
11 ай бұрын
Nice work. I believe the lighter lines on the panel were by shipping tape. The aircraft were transported by sea and the tape was put on to prevent corrosion between the panels and getting inside the machine. You seem to have pulled it off (excuse pun!) Nicely.
@scaleresurrectionmodeler7379
11 ай бұрын
Thanks for commenting! That's great info! Yes the shipping tape makes total sense!
@enginebno
Жыл бұрын
Thank you for the detailed technical explanation
@scaleresurrectionmodeler7379
Жыл бұрын
Your welcome!
@flightlinemedia
Жыл бұрын
Nice work! I've got the P-38J itching to be built, but it will probably be a while.
@scaleresurrectionmodeler7379
Жыл бұрын
Thanks! It's so worth it to just drop everything and build it. It was such a nice kit
@davidwas77
8 ай бұрын
My girlfriend bought me this for Christmas. I've never built a model like this before so I'm a total noob. 💀I bought all the tools but I'm not wanting to mess it up because of how thoughtful, expensive, and very _detailed_ it seems. So, I figured I'd check out KZitem to get some idea of what I should do. Thanks for the video man.
@scaleresurrectionmodeler7379
8 ай бұрын
No problem hopfully it helps! Also. It's very simple just do one thing at a time and you'll get there. Tamiya makes it simple
@Bob-b7x6v
8 ай бұрын
If you look at the pattern in the packing tape, it was mostly to seal the engine access areas and gunbays.
@DebOxy
10 ай бұрын
New subscriber. I restore the real things, takes years not weeks, at the moment. Seafury😂….Love your detailing
@scaleresurrectionmodeler7379
10 ай бұрын
Awesome! Thank you!
@Bob-b7x6v
8 ай бұрын
The lines in the olive drab were from packing tape used to make the Lightnings more saltwater resistant when being shipped by sea.
@robbo1068
Жыл бұрын
Terrific job on the 38...really enjoyable video filled with tips/techniques and great commentary. You must be very happy with the final result...it looks amazing this side of the screen. Apparently the lines around the nose and engines etc were created by tape (not sure which) to prevent salt corrosion of internal components when the planes were shipped overseas.
@scaleresurrectionmodeler7379
Жыл бұрын
Thank you so much! Ohh yeahh the hard work was worth it and those tape lines are the cherry on top! Thanks for watching!!
@DutchDaveModels
11 ай бұрын
That’s a highly detailed kit! Quite different from the Monogram/Revell range you used to build. Excellent built model ✨👍✨
@dietermuller8625
10 ай бұрын
The Stripes you have seen on Pictures is because before they shipped the Aircrafts over the Ocean, they have sealed the Panel Lines, to avoid Corrosion, which could happen from the very salty Water.
@lesthiele4921
Жыл бұрын
That was a absolutely outstanding finish on the P-38, i have this kit in my stash and hope to get onto the build soon, bext regards from Australia 👌👍👌👍
@scaleresurrectionmodeler7379
Жыл бұрын
Thanks so much! It really did turn out great! Especially those tape lines and the post shadeing
@kevinnazario1015
8 ай бұрын
Beautiful job. Now do some Tamiya German planes. The me 262 or the fw 190 would be good.
@BillAdams-i4q
11 ай бұрын
U rock dude!
@scaleresurrectionmodeler7379
11 ай бұрын
Thanks!
@peterdiepenthal4090
4 ай бұрын
A better method of weathering is use a dry brush instead of wiping it of that way you can use more of your wash in other places
@melvinjohnson7033
10 ай бұрын
Great results! Now if Tamiya would only pre cut those masks!
@gwingdor
Жыл бұрын
That’s a beauty!!!
@scaleresurrectionmodeler7379
Жыл бұрын
Thank you, what a great kit!
@brianmaki4168
Жыл бұрын
Great work! Now swap sides with the props and it will be perfect…
@scaleresurrectionmodeler7379
Жыл бұрын
Good idea!
@HangardelModelista
11 ай бұрын
Great job! 🔥
@roberttaylor6108
Жыл бұрын
I wish he would do the 1 : 48 B36 Peacemaker by HpH Models
@scaleresurrectionmodeler7379
Жыл бұрын
I'll build it just for you mate!
@scaleresurrectionmodeler7379
Жыл бұрын
It's a 1000 dollar kit...
@scaleresurrectionmodeler7379
Жыл бұрын
Lol
@roberttaylor6108
Жыл бұрын
It's 487 in usd. I've been saving up for it. But man o man is it big. Like my 1:200 HMS Rodney. I build entirely too big models. I wish they made a 1:48 Anotov An-225.
@henrypena2547
Жыл бұрын
Nice,Build
@scaleresurrectionmodeler7379
Жыл бұрын
Thanks!
@Dixty.
Ай бұрын
Hi can you do 1:48 Supermarine Spitfire Mk.I & Light Utility Car 10HP Tilly
@Spitmk9c
8 ай бұрын
Should work on your decal application. Silvering ruins an otherwise nice model you have completed.
@scaleresurrectionmodeler7379
8 ай бұрын
I fixed it later poked some holes in it and put some decal solution in there. I just had to finish to get the video out
@scaleresurrectionmodeler7379
8 ай бұрын
Thanks for watching and thanks for the tips. You know how tamiya decales are really finacy
@muhammadkaindra1245
Жыл бұрын
Hello
@scaleresurrectionmodeler7379
Жыл бұрын
Hi!
@marianholly863
7 ай бұрын
Why is EVERYBODY doing the on line builds wearing BLACK GLOVES???
Пікірлер: 46