Life saver - Just replaced the injector seals on my Peugeot 3008 same engine. Finished and could not get the engine to start was cranking but not starting. Gave up for the day just watched this gone outside used the button on top of the fuel filter and she is running. Top Guy
@Chris_CDB
Жыл бұрын
Good news, glad that it helped!!
@alanfletcher894
2 жыл бұрын
Great help thanks - struggled to get mine started after fuel filter change but all good now, really appreciate you taking the time to make this video.
@bartoszk4812
8 ай бұрын
Good video mate 👍 Had this kind of primer button on my Mazda 6 2.2 d. Always filled new filter with diesel, primed it with a push button and it never even had a hiccup on start up 😉
@Chris_CDB
7 ай бұрын
Good news
@led665
9 ай бұрын
Thank you so much for this video!! Absolutely popped my pants when mine wouldn’t start, didn’t realise I had to pump the button! 🤦♂️🤪
@Chris_CDB
9 ай бұрын
No problem at all, glad to see it helped you out, easy when you know how!
@philiphancock8324
2 жыл бұрын
I have a volvo with similar engine and same filter but I can't understand why they don't put the prime pump on it whereas Peugeot and Ford version's do 🤔 thanks volvo
@vlad-iulianciobanu1884
Жыл бұрын
I have a Peugeot 3008 (just bought it) and I think the fuel filter needs changing, the car has 120 000 miles, and I did not see any invoice for the fuel filter replacement. I also get esp asr fault and check engine light if I start the car from cold. But If I let it warm up the errors disappear. Also, when I start it the smoke is quite whitish and the fuel smells a bit too much. Thank you for the video, great work !
@Chris_CDB
Жыл бұрын
Hi mate, I would HIGHLY doubt that the fuel filter is the original filter at 120k miles, it would of definitely clogged before now, but it wouldn’t hurt to change it! The esp and asr faults will need to be scanned with a scanner to determine what the faults potentially are.
@tigerxra8515
Жыл бұрын
Thanks. I've gotten P0087 fault on my 2007 Citroen C5 when I was flooring it to overtake a semi-truck. By the description of fault code, at one moment ecu has detected too low fuel pressure in common rail system. I think that it might be a clogged filter (or little filter in fuel tank).
@Chris_CDB
Жыл бұрын
Filter would be the first point of call.
@mihaigirghescu361
Күн бұрын
Thank you !👍
@johnmcculloch4009
6 ай бұрын
Hi, Useful video, thank you. I have a 2013 Peugeot 308 e-hdi 8V FAP S&S 115 cv, and tiny diesel oil drops are found on the garage floor when I use the car and then park it. (I have removed the large plastic cover under the car and engine to try and identify the problem). If I don't drive it, the oil drops stop. When I start the engine I cannot see any diesel fuel from any of the connectors on the top of the diesel filter, nor from the fuel injectors on the top of the engine. Since looking at your video I am wondering if the leak could be coming from the bottom of the filter. I believe the tiny leak is dripping from below the diesel filter. Presumably the water sensor (on mine like yours......with no electrical connection) stays closed when the car is operating normally and nothing should come out of the bottom of the filter ?? I am wondering if my diesel leak could possibly come from a faulty seal there ?? The diesel filter was changed about 6 months ago, but I don't believe the leak started at that time. Would be interested in you opinion please.
@csabagabor5313
22 күн бұрын
hi, i have a volvo d2 (1.6 hdi) with a fuel filter that has only 2 hoses connected and no pump. is there a way to change mine to one with a pump? is the third hose for returning overfilled fuel to the tank? thanks!
@flybobbie1449
2 жыл бұрын
Just done this, surprised what a difference it makes. My Berlingo was struggling to hit 3500rpm. Now a lot livelier. I think first time it has been changed in 44k miles and 10 years..
@Chris_CDB
2 жыл бұрын
Good news, yea an unchanged filter of 10 years would be pretty clogged!!
@flybobbie1449
2 жыл бұрын
@@Chris_CDB Soon has it started, it sounded different. Always felt as though engine was tight. Long trip tomorrow so looking forward to how it performs.
@seijun6838
3 ай бұрын
Yea bro great help tnx so much 😊
@jaybradley3765
Жыл бұрын
Great video any tips how to remove a stuck injector below the fuel filter
@MWB_logic_reason_respect
Ай бұрын
Thanks for the vid. I am bit confused, why did you the external pump and not the pump on the filter? Do you have to an have external pump? (DIY guy here) All the best .
@Chris_CDB
Ай бұрын
Some of the filter housings have a primer bulb built into them, however this model does not. So you need to use an external pump!
@CobnutVTS
4 ай бұрын
Hi mate cheers for the video just wondering if i understand that the filter doesnt actually need filled up? Like if i press the primer button enough times itll eventually fill up and start? Is that right and to do that would the fuel line have to be disconnected or would i pump the button while its connected until it goes hard? Hopefully that makes sense, cheers!
@Chris_CDB
4 ай бұрын
Yea, connect up all pipes to the filter, pump the primer and it will fill the filter itself and the pipes too.
@CobnutVTS
4 ай бұрын
@@Chris_CDB legend mate cheers
@richardjones8940
11 ай бұрын
very helpful thank-you..!!
@huntman9485
3 жыл бұрын
Great videos. Is it possible to show how to replace a Audi A4 2.0 TDI B 8.5 (2014 MODEL) Fuel filter replacement sometime please?
@Chris_CDB
3 жыл бұрын
Hi mate, thanks a lot. Yes I will do a filter replacement video when I get one in for that vehicle no problem!
Жыл бұрын
Hi,happy new year mate,i'c recently changed my filter,and punped that Primer fo 10minuts and from those come nothing,how much i need to pump?
@PoEt121
2 жыл бұрын
Nice one 👍
@user-oq6vj8xm6q
2 ай бұрын
I have leak from the filter down connection.. after the replacement..how its need to be fitted
@giannismclaboy9483
Ай бұрын
Excuse me ,can i ask something,what is the purpose of this "pin",no the primary button,but the near by,thank you!!!
@Chris_CDB
Ай бұрын
I’m not following what you are asking?
@eduardvarvara1829
2 жыл бұрын
Hi great videos! If could help me on a problem I would be very grateful 🙏 I have the same engine on a Peugeot 308 1.6 Hdi my mechanic changed the fuel filter but forgot to fill it up with diesel and now the engine won't start! He says that now there is air in the fuel installation. What can he do? He needs to use a vacuum pump and then to press the button from the top of the fuel filter? Is it neccesary to press that button ? Thank you a lot!
@Chris_CDB
2 жыл бұрын
Hi, thanks for the comment….Does your filter housing have the round button on top of the filter housing then?.. (as in a primer button)?..
@eduardvarvara1829
2 жыл бұрын
@@Chris_CDB Yes
@Chris_CDB
2 жыл бұрын
@@eduardvarvara1829 just keep pumping that primer it will start !
@eduardvarvara1829
2 жыл бұрын
@@Chris_CDB Thank you so much it worked 🙏🙏🙏 Saved me a lot of headaches! Thank you again!
@eduardvarvara1829
2 жыл бұрын
Just for my knowledge what does that button do? What is his role? Thank you
@MultiAdere
23 күн бұрын
Is there a way to pre fill the filter before installation?
@Chris_CDB
22 күн бұрын
Not really possible without a faff, considering you would basically have to put a long tube onto the “in” side with a funnel and then let gravity fill the filter, however it’s not really feasible as your likely to pour it back out when installing it back into vehicle!
@jasonskerrett3826
Ай бұрын
If your pumping it for a while and it doesn't go stiff what could be the cause? Haven't changed the filter but did have to move it to get to the retaining nut from the fuel line after it went awol after replacing injector
@jasonskerrett3826
Ай бұрын
Nevemind that it did eventually get stiff (lol) but the car still doesnt start. Just cranks but wont start
@Chris_CDB
Ай бұрын
What was the original issue with the car before you touched the fuel lines?
@user-oq6vj8xm6q
2 ай бұрын
Have fuel leak from hose under the car near the sump do u know what's it?
@Chris_CDB
Ай бұрын
That will be the filter is incorrectly fitted or a poor filter
@jamesgeater4874
11 ай бұрын
what size pipe on the pump please?
@Chris_CDB
11 ай бұрын
If I remember rightly it’s 6 or 8mm
@lappi_wojak
Жыл бұрын
you don't have any 'pump' buttons on a Volvo
@Chris_CDB
Жыл бұрын
You may have a lift pump then.
@rajko666
Жыл бұрын
I have P0087 code after fiting new filter, could the filter be defective?
@Chris_CDB
Жыл бұрын
does the vehicle run?
@IbnuCuruk
Жыл бұрын
What engine code is this? I don’t think it’s the same as the Volvo V40 D2 1.6L D4162T
@Chris_CDB
Жыл бұрын
It will be similar engine, code will be different but engine will be same
@IbnuCuruk
Жыл бұрын
@@Chris_CDB Some of them have the pump to pressurize the system, others don’t. That’s why I asked. Thanks for the reply.
Пікірлер: 72