Man that's got to be one of the finest RC boats I've ever seen
@Livlifetaistdeth
3 жыл бұрын
That might be the single greatest rc boat ever!
@junoypi
Жыл бұрын
Without a doubt, the best rc boat ever I’ve seen. This is the ultimate.
@ThePocketMedic
Жыл бұрын
Contender for the coolest RC vehicle ever.
@aerospacematt9147
2 жыл бұрын
Wow, powered by a turbine just like the full scale! That’s pretty awesome!
@1970jaimee
2 жыл бұрын
Without a doubt the most beautiful RC hydro; wow!
@ThomasDoubting5
4 жыл бұрын
That genuinely rapid by any standard of water craft. Sounds and looks awesome.
@DeadChan67
Жыл бұрын
Thing almost looks like it floats on the water. Built really well, a very stable little RC model that seems to be
@zeeek1
4 жыл бұрын
Imagine 4 or 6 of these in a heat? Holy crap that would be fun to watch.
@ginopunsalan
3 жыл бұрын
That boat is wicked. From the turbine sound and rooster tail. Nice!
@richardkautz2947
3 жыл бұрын
OMFG!! That is Wicked ! I haven't been much interested in RC boats, but Now ?! The Turbine sound and power to throw rooster tails like that is incredible ! 👍
@GhostPepperDesigns
8 жыл бұрын
I have now had it up to 127mph on a 1/6 mile oval course
@xswijnji
8 жыл бұрын
+Ghost Pepper Design is this Mr. Todd Fleury? Just curious, as I remember you/him discussing their turbine hydro on OSE, and I figured that this must indeed be the boat and thus the owner. I didnt realize the SPM5 can be tuned like that, it always seemed like from the overseas vids ive watched that they all seem to list their top speeds at around 80mph. Thats amazing! Also, I was curious what this hull is made of or manufactured by? I know you are fond of ML and have had some work done with Mike, but with this boat I was moreso curious in that I noticed the cockpit is permanently attached to the hull unlike all the wooden builds ive seen, and I had been wondering where you got your cowling too. Lastly, do you think you could recommend an electric motor that would be suitable for a 1/6 scale like this? I have a 1/6 scale hull being produced for me overseas currently and im planning to run a TP Power 5850/5670 to start out with, and I would like to stray from the expensive Lehner motors if possible.
@kennyhuskisson2684
6 жыл бұрын
Ghost Pepper Design OMG, that is just something to see!, awesome boat & job!
@JeffWoodwick
Ай бұрын
That is a very cool RC boat.
@RandomAndrew
3 жыл бұрын
Wow I love this... I wouldnt even know where to start when building this but I know I need to have one!
@michaelhrivnak1719
3 ай бұрын
You start by getting a second mortgage on your house!
@danstump3686
3 жыл бұрын
Damn that frikken thing is sick!
@MllrtimeOnTheTube
3 жыл бұрын
Wow! Absolutely amazing!
@homienat3374
2 жыл бұрын
No way ,nice machine there mate hope she is still around
@dawnthe5031
6 жыл бұрын
I give it thumbs up for the speed and the flames
@macgyver5108
2 жыл бұрын
What a freakin MONSTER! That thing sounds amazing!
@user-nn3ye4hk4c
8 ай бұрын
That’s rad…! I want one.
@kiplindsay8413
4 жыл бұрын
Nice. Would love to see it on a larger body of water, for no other reason than to just watch the beauty of it on a plane
@glashoppah
2 жыл бұрын
That is insane.
@kenfung664
4 жыл бұрын
accelerates and corners like the real thing
@user-hu8fe6gp9g
3 жыл бұрын
Офигеть крутая штука 👍
@johnhopen
7 ай бұрын
Camera man got me sea sick, but that is really cool!! Nicely done!
@shaunmiller9369
6 жыл бұрын
pretty f...ing awesome
@johnrobinson1140
2 жыл бұрын
Oh sweet Jesus! 😳
@inactive67
9 жыл бұрын
If I ever had a spare 15K or so......but no matter thank you for sharing beautiful boat!
@MajTom-wd2yt
4 жыл бұрын
Thats what I paid for our first Allison GS.
@alexmarshall4331
4 жыл бұрын
Impressive...almost decks awash til the power comes on👉💣👉⚡⚡
@geoffreyvanvugt8179
10 жыл бұрын
looks really good what prop are you running
@mahesapemuda6750
3 жыл бұрын
Fantastic!
@ringerdiggsycobbsy6254
Жыл бұрын
Wow amazing I'd love to buy one
@hazriazeri3631
Жыл бұрын
Greds Nice fast rc bot used terbien terbo😊👍👍👍
@pinoyrcmaker72
2 жыл бұрын
It’s awesome RC . Subscribes done Sir
@matthaug3104
10 ай бұрын
A whole nother level awesome
@GhostPepperDesigns
10 жыл бұрын
Geoffrey, I am running an x457/3 sharpened, balanced and detounged 90 degrees from the hub. But that is just my setup. You will have to find what works for you depending on your sea level height etc.
@TheRicsta
Жыл бұрын
Id would love to see the construction is it shaft or thrust drive
@jansvasta2146
4 жыл бұрын
Now thats how they should be driven!
@jerrysmith7166
2 жыл бұрын
now that qas bad ass!
@NASTXL
9 жыл бұрын
Badass!! Just.....
@frankjrouseau8563
8 жыл бұрын
Holy shit how fast does that unit go ?
@dg8062
2 жыл бұрын
If I'm gonna spend that much on a toy, I wanna ride along too!
@04swiftstang
7 жыл бұрын
that thing is a pure beauty man....i love my bj29 v3, but turbine powered is on another level.
@GhostPepperDesigns
7 жыл бұрын
Thank you. I am now selling this item.
@natelevi779
5 жыл бұрын
Ghost Pepper Designs how much?
@frisk151
Жыл бұрын
Which turbine are you running in it? Wren? Not a traditional rear exhaust... Nice work! I love how you are ripping the turns!
@crazywaderacing4659
4 жыл бұрын
awesome! you need a bigger pond to turn it loose! lol
@mdss7976
Жыл бұрын
Excelente
@dondidykes6664
4 жыл бұрын
That sounds just like a jet fighter
@heraldoboldrin
10 жыл бұрын
Todd, where i can buy this Hull? i am looking a big hydroplane to use a lehner engine..
@corndogfishing451
6 жыл бұрын
Badass!!!!
@amirulhafiz7213
2 жыл бұрын
Wow Nice 👍
@inventions47
2 жыл бұрын
Love it 😀 bet ya nabours love ya 😆
@GhostPepperDesigns
10 жыл бұрын
Bigwaveohs, Little fast to be running at Campbell or Fremont. I will for sure pass some info on through Jim.
@yoadrian2705
4 жыл бұрын
I want one!
@winnipegperfectcircleflyin7859
4 ай бұрын
Beast
@laska907
2 жыл бұрын
*The fish:* _they have arrived_ 👽👽👽👽
@dopplerfox
2 жыл бұрын
Who designed this? The stability of it is just incredible.
@GhostPepperDesigns
2 жыл бұрын
It was hand built by Peter Mueller. The hull was built by a friend of his in Germany. Unfortunately, it was the last boat Peter built before he disappeared.
@scottbuck9348
2 жыл бұрын
Disappeared? That doesn’t sound good. Man I wish someone would find him cause he could make some serious cash if he built and or sold the plans! I have all electric and nitro rc boats but I’m seriously considering getting into the turbine side!
@bigwaveohs1
10 жыл бұрын
Hey Todd - This is awesome...too bad you're not still running at Campbell...LOL! If you have any build info, photos & etc. could you send it through Jim's email? I've always wanted to build one of these bad boys. Pete from the Campbell pond
@dondidykes6664
4 жыл бұрын
How fast is it??
@scottbuck9348
2 жыл бұрын
I know this was posted many years ago but is this beautiful machine up for sale! I’m a serious buyer and want more info if you would consider selling it! Thanks
@claudecousineau5811
2 жыл бұрын
Great boat, maybe propeller too close to transom, if boat wants to overturn, and skid fin a tidbit too deep in the water two mods that doesn’t take much work and worth the try otherwise 👍
@GhostPepperDesigns
2 жыл бұрын
Appreciate the feedback. But the strut and turn fin are exactly where they need to be in order to have this boat run at these speeds.
@roderickrayrutledge2740
Жыл бұрын
Damn that's pretty! 👍
@LCMNUNES1962
2 жыл бұрын
👍👍👍 🇧🇷
@dshow1658
3 ай бұрын
Holly shit !!!
@miltechmoto
3 жыл бұрын
What happens if the turbine goes in the water? Would it hyrdolock?
@chuckels431
3 жыл бұрын
Had a turbine on a float plane dunk on takeoff wide open.. it tried to suck the water in so fast it pulled the compressor blades out the front.
@jamessutherland762
5 ай бұрын
How is the turbine mated to the prop?
@GhostPepperDesigns
5 ай бұрын
Gearbox built by MHZ
@ronh1501
2 жыл бұрын
😳👍👍👍👍
@jacobellw
9 ай бұрын
Hi there great video! What engine is in this please? Thank you!
@GhostPepperDesigns
9 ай бұрын
Jetcat SMP5 with the MHZ gearbox.
@homienat3374
2 жыл бұрын
🤙🤙🤙🤙🤙🤙🤙yes want 1
@UrbanAssaultJeep
7 жыл бұрын
Where can I buy the hull kit or plans to build it? Does it cost $12-15k to build yourself or is that to buy from someone
@GhostPepperDesigns
7 жыл бұрын
Brandon Hanover the hull is custom built out of Germany. There really is no kit to build one. It will cost you 15k just to build one.
@UrbanAssaultJeep
7 жыл бұрын
Ghost Pepper Design who can I contact to have one built
@GhostPepperDesigns
7 жыл бұрын
Brandon Hanover I am not sure who builds them anymore. Peter Mueller who built my boat fell off the face of the earth. I have put my boat up for sale.
@UrbanAssaultJeep
7 жыл бұрын
Ghost Pepper Design how much and are pics posted anywhere?
@GhostPepperDesigns
7 жыл бұрын
Brandon Hanover I am selling for 10k. All you need to add is rx/rx. I have pictures of the boat on Facebook - Todd Fleury
@GhostPepperDesigns
10 жыл бұрын
Heraldo, you can't purchase this hull. It was a custom hull. Look at what www.mlboatworksrc.com has to offer for a 1/6th scale.
@ricardorosales168
4 жыл бұрын
Gracias por la información. Tanks for the information this is going to be my new boat. Saludos from New York.✌🍎🗽
@baimaireaung7806
4 жыл бұрын
space ship
@marthenamibrahim8880
2 жыл бұрын
Next time dont zoom camera....
@robertliepe6766
2 жыл бұрын
💯👍👍👍🥂🍾😎🇺🇲
@diytypeofguy6502
7 жыл бұрын
I thought u had to connect all kinds of crap to turbines to start them up? kerosene etc
@GhostPepperDesigns
7 жыл бұрын
Nope, this has remote start. The turbine starts up by using a lipo battery and a small motor
@diytypeofguy6502
7 жыл бұрын
Ghost Pepper Design cool ..that makes it more desirable
@KK-ht2hs
2 жыл бұрын
白鳥🦢?生きてるの? 逃げないの?
@PAKiller1
4 жыл бұрын
Why do RC hydroplanes always run clockwise, when the real ones always run counter clockwise??
@highatruthart
4 жыл бұрын
Turn fin is usually on the starboard side, & clockwise is just the direction they race.
@PAKiller1
4 жыл бұрын
@@highatruthart thank you, always wanted to know that
@chuckels431
3 жыл бұрын
It more has to do with the prop rotation , don’t know about full scale but rc models all have engines / props that rotate left hand looking at the rear., most don’t like to make left turns they have a bad hopping tendency.
@GhostPepperDesigns
10 жыл бұрын
@ernestdyer9401
3 жыл бұрын
Can you buy one of those things?
@hotdog8214
5 жыл бұрын
What are you scared about😂.. it's in the water..scared is when you maiden a 15k model jet .. Talk about pucker factor
Пікірлер: 107