I'm thinking of buying a car with a 1.6THP engine producing 165HP. The car is maintained every 10K kilometers and currently has 96K kilometers and the timing chain itself was recently replaced. I ofc would do annual service to the car or 10K kilometers as recommended but my question is, if its even worth the "hussle" the reputation of the Prince engine itself. The car itself is a DS3 which is really rare where I live and its fairly cheap for its competitors which is why im thinking about it from the start. I'm not afraid from its routine maintenance but my question is if theres anything I should be "afraid of" with this engine? Thanks!
@simondoesthings
Жыл бұрын
Of the timing chain was replaced you don't really have much to worry about in terms of reliability. Ask the seller how the camshafts are looking - those engines are known to develop scoring on them, and replacing them is costly. The things you will be replacing annually are probably the camshaft position sensors and valve cover gaskets. Also, when buying, take a look at the place where the engine and transmission meet - the crankshaft seal is very susceptible to leaking due to age, and replacing it is a bit of a bitch in a Peugeot - donno how about in the DS3. If you see any leaks there, that's a good reason to ask for a significant discount. They are good engines, just need a bit of preventive maintenance.
@mytube5340
7 ай бұрын
What torque did you use to timing chain upper guide rail bolts?
@simondoesthings
7 ай бұрын
I think that the upper guide rail was 20nm but I'd refer to the manual really, it's been a while since I done one of these.
@richyclubsport5155
Жыл бұрын
Excellent video, my 207 GTI occasionally has a start up rattle when i don't use it for a few days, a couple of Mechanics said complete timing chain kit replacement, ridiculous price, how long does this replacement take please? It's worth a try as just found tensioners are available separately
@simondoesthings
Жыл бұрын
It took me about 2hrs but I was doing it for the first time
@adamlloyd2688
Жыл бұрын
So can I just replace it without locking the cams etc?
@simondoesthings
Жыл бұрын
Sure, just don't turn the engine. You don't need to anyway.
@kylebamford4760
6 ай бұрын
How many tensioners are on the engine bmw told me 3 is it just this one u change ?
@simondoesthings
6 ай бұрын
This is the only one I'm aware of in this engine - it does have three chain guides tho.
@kylebamford4760
6 ай бұрын
No probs cheers is it just remove and replace or have u got line timing up etc thanks
@simondoesthings
6 ай бұрын
Remove and change, but don't turn the engine when the tensioner is removed
@bethelegboghu7813
Жыл бұрын
Thanks for this video. Was wondering if it was something else wrong with my car. If you can have a dedicated videos for The EP6 engines it will be appreciated cos this engine seems delicate hence requires in depth knowledge on what to expect from it
@simondoesthings
Жыл бұрын
You should look into the Mini community. This engine is somewhat popular there, they know pretty much everything about it. Peugeot and BMW stepped back from this engine because the problems it had overcame the eventual costs for abandoning it. Is there anything you would like to know about this engines maintenance?
@JoseSanchez-xg6ll
7 ай бұрын
And to tighten it back to 60nm how do you do it? My my torq ratched doesn't fit in that place
@simondoesthings
7 ай бұрын
I have a very specific torque wrench for those applications, the German name for it is Gutandtight 😂
@winsonyew84
Жыл бұрын
how many km ? change year
@simondoesthings
Жыл бұрын
The same engine is in Mini - and they suggest to change it after 100-120kms. Peugeot does not specify.
@bigt43
Жыл бұрын
I see online people say 1.6 vti timing chain every ten years or 80,000 - 120,000 Miles Mine is 13 years old and on about 85,000 miles and is sounding rattly, so I'm trying to decide to I do a whole timing chain and vti kit, or just change tensioner as in video, but as I may keep the car for 2-4 more years or so. I may just do the full lot
@mlawlan69
Жыл бұрын
Cannot for the life of me find the 3rd T30 on the throttle body, absolute nightmare of a job.
@simondoesthings
Жыл бұрын
100% by feeling, yeah. But it's better than removing the intake!
@mlawlan69
Жыл бұрын
Definitely better than removing the entire intake but still an absolute bugger of a job!
@simondoesthings
Жыл бұрын
I'm glad you did it! Did it help?
@alistairmscott
Жыл бұрын
I could see all three, couldn't get the third one out with the tools I have. Need a much smaller ratched to get in there.
@simondoesthings
Жыл бұрын
@@alistairmscott I sometimes use a torx bit and spin in with a racheting spanner
@PrestigeWorldwide-XXII
Жыл бұрын
Mini Cooper 1.6 has the same engine and YES it is a piece of S*** engine
Пікірлер: 28