The Accumulator valves becoming stuck sucks!! ALL 3 of mine were hard to move but the 4th was really bad. I had to soak it in mineral spirits and work it back and forth, 1mm at a time, forever!! They will all be replaced with steel valves as I believe this is what eventually led to the clutch burnout. I found a old telecom pic I had worked best, and oddly it was very useful throughout the rebuild. Like it was made for transmission work. Jonard Tools JIC-22035
@nickstransmissions
Ай бұрын
Yes, they can be an absolute pain in the ass...I've had a few come in where they were so siezed/stuck, I just tossed the accumulator body and replaced with a good, used one that was compatible with that particular 4R100. Appreciate the tool recommendation, will check it out. Anything to make quicker work of those acc valves would be very helpful and well-received 🍺 Thank you for watching!
@okeechobeejoe2868
2 жыл бұрын
Are you gonna do a video on a E4OD heavy hauler transmission rebuild ? Really would like to see that .
@nickstransmissions
2 жыл бұрын
I'll definitely film and post it if one comes in.
@austinkersey6449
Жыл бұрын
Nick, I have had a heck of a time finding any useful information on rebuilding the 4r100 in the detail you provide. I have a late 99 7.3 and suddenly had all neutral gears while hauling my camper. If you have the time, I would love to have a conversation with you in regards to which parts I should rebuild with.
@nickstransmissions
Жыл бұрын
Are you saying that in all my 4r100 videos up on the channel, none of them are helpful for you or am I misinterpreting what you’re trying to say? The parts I cover in the overview video are what id recommend you incorporate into your build. It’s up to you if you want to run the Transgo PwM-to-On/off TCC lock up kit.
@FixItStupid
Жыл бұрын
Oh I See Just Found This TY
@CLUBCARLIFTED666
Жыл бұрын
Hey brother thanks for the video if the imput shaft breaks can you just replace the shaft ?
@nickstransmissions
Жыл бұрын
In theory, yes (use a billet input shaft designed for your engine’s power and torque levels) but in practice snapping the shaft can also damage other components. Once you have it out and apart you will see what needs replacing.
@theezeelife292
4 ай бұрын
Looking fir the best heavy duty clutches for my 4R100. Here's my application; 7.3L Powerstroke pushing about 400hp 4x4 37 inch tires 4.56 gears with selectable lockers Will see quite a bit of off-road use, mostly rock crawling Any advice will be greatly appreciated.
@nickstransmissions
4 ай бұрын
Thanks for watching, @theezeelife292! I typically use Raybestos GPZ frictions or their Stage One red clutch module. Those are both great for heavy duty working/towing/off-road use and are usually available from local or on-line transmission parts suppliers as well as eBay. The Raybestos blues are also great but I generally don't use them unless racing is apart of the equation. Another alternative are the Alto Reds w/Kolene steels...I've used those as well with good results.
@huntersharpe1700
3 ай бұрын
Is there not a metal version of the white plastic one way sprag ? I know they came out late 2000-2001 what was the design before ?
@nickstransmissions
3 ай бұрын
Hi Hunter, thank you for watching...Not sure, the only overdrive sprags I've ever used where the white ones.
@wmhs02dm
2 жыл бұрын
Could you do a video on the top 5 signs of a transmission going out?
@nickstransmissions
2 жыл бұрын
Sounds like a good topic for a vid; ill do one in the near future
@3500camarz
Жыл бұрын
I have an 01 Lightning with the 4R100 and the mechanical diode that you speak of. Do you have any videos that show what this mechanical diode looks like or how involved deleting it is? Luckily my trans doesn’t need a rebuild yet, but I plan to reference your videos whenever it does need a rebuild!
@nickstransmissions
Жыл бұрын
Unfortunately, I don't at the moment but will film and post once another 4R100 comes in w/one. Thank you for watching!
@derrickstennett2078
2 жыл бұрын
Going to be rebuilding mine this weekend. Curious if you have a link to where I can get the shift kit n extra parts for the rebuild?
@nickstransmissions
2 жыл бұрын
Any transmission parts supply shop should stock the Transgo Tugger and Sonnax parts...Amazon, Ebay and other online retailers have them as well. Don't forget to have the coast clutch drum brazed as most don't do that step and Ford has a TSB out on it.
@robertdivany1627
5 ай бұрын
Do this transmission shift really hard after been bulletproof?
@nickstransmissions
5 ай бұрын
Thank you for watching, Robert...If they are improperly calibrated, either mechancially or electronically, they will..Shifts should be crisp, quick but not harsh.
@brianblithe2271
3 ай бұрын
What city and state you in Nick ??? and how about a cast iron (or is that what you mean by a "billet") forward drum ? ive heard something about them,any info.( sorry if i dont comprehend yet) ?
@nickstransmissions
3 ай бұрын
I don't give out my location on YT beyond saying I'm in the Southwest. If you're looking to have a transmission built, you're welcome to send me a direct message on Tahoeyukonforum.com. My user name there is Nicktransmissions.
@CLUBCARLIFTED666
Жыл бұрын
My 99 7.3 2nd to 3rd wot loud bang all nuetrals only had park
@nickstransmissions
Жыл бұрын
Broken input and/or output shaft...sorry, didn't see this comment until now, lol. Have you rebuilt it yet?
@jimb9265
2 жыл бұрын
Do you rebuild these transmissions in Southern California?
@nickstransmissions
2 жыл бұрын
No, not in SoCal
@christiangamboa5338
Жыл бұрын
Do you have a parts list for this build?
@nickstransmissions
Жыл бұрын
I'll put a complete list in the description later today but here's what I recall from memory: Raybestos Blue Plate and high energy frictions, Raybestos steel kit, complete bushing kit, Sonnax Zip kit, Transgo Tugger shift kit, SLS overhaul kit (gaskets, seals, etc), filter, solenoid pack (Ford OEM), Transgo torque converter clutch lock up PWM-to-OnOff kit (optional), thrust washer kit, billet steel input shaft (high performance only), custom low stall torque converter.
@dbitzane
Жыл бұрын
@@nickstransmissions Can you add the complete part list to the description??? Thank you sir!
@brianblithe2271
3 ай бұрын
@@nickstransmissions Looked for the "SLS' brand, could you tell me their full name ?
@nickstransmissions
3 ай бұрын
Hi Brian, S/LS is a code for an overhaul kit, not actually a brand...If you're looking for a complete kit (less solenoid pack, hydraulic correction kit and one-way assemblies) check out this Raybestos Stage One kit on eBay...I've used these and their GPZ friction module over the years and have had very good luck with them...Much better than the factory frictions for higher HP/Torque HD applications. www.ebay.com/itm/175485950022?itmmeta=01HWP9GXDDY9SX3E26N9EV8FA4&hash=item28dbc71846:g:ROkAAOSwJoJjbo1x&itmprp=enc%3AAQAJAAAA4KeV3syZs7966E5kBo8pcCtARsj2xgyCI44BJkSjSF7EoZkxHCYoEMzcjFHszLdxyzo4ROHlq3dIIJpf7kAbTjxQrizRPZ5y6LDniQXwi%2BTfvUY9ECHt00rEnMeGT%2Bkd0Cq%2FOxaeZWBR1c86gCqMAXZHpc1I49W7GldfvNsOwr5%2F2vG8ysGINMNCERaYcQh5FQnLLGNrQCxhCis85wtNtOVpnhqZ7gwg1KoKyrBZWBSBbWWN53R41%2B1lyUNrAV1PaPqaKd8%2FC913RZBmGqWkynoH95xq5Gr6qEaRq2Vw%2Ba7C%7Ctkp%3ABk9SR-bWw8nlYw
@tonka3293
2 жыл бұрын
Hey boss, anyway to chat with you outside of here? I’m rebuilding truck trans as a side hustle. Just wanted to pick your brain
@nickstransmissions
2 жыл бұрын
Unfortunately, I don't think KZitem has the direct message feature anymore and i don't give out my contact info but would be more than happy to answer your questions here. Post them and ill reply as soon as I can.
Пікірлер: 34