Digital LED Gas Alert Alarm Specification MAP Brand for Hospital
1. General Requirements:
Purpose: To provide continuous digital monitoring and alerting of medical gas levels and system status in hospital environments.
Location: To be installed in critical areas such as ICU, surgical suites, and recovery rooms.
2. Dimensions and Design:
Dimensions:
Height: 275mm
Width: 415mm
Depth: 80mm
Design: Wall-mounted with a digital LED display.
Material: High-impact, flame-retardant MS Housing.
Finish: Smooth finish with antimicrobial Powder coating.
3. Gas Monitoring Capabilities:
Types of Gases Monitored:
Oxygen (O2)
Nitrous Oxide (N2O)
Medical Air
Vacuum (suction)
Carbon Dioxide (CO2)
Sensors: High-accuracy, long-life digital sensors specific to each gas type.
4. Alarm Specifications:
Visual Alarms:
Color-coded LED indicators for each gas (Green for normal, Yellow for warning, Red for alarm).
Audible Alarms:
Adjustable alarm volume with a minimum of 85 dB at 1 meter.
Distinct tones for different alarm conditions (low gas pressure, high gas pressure, system fault).
Alarm Conditions:
High/low gas pressure.
Sensor failure.
Power failure.
5. Display:
Type: High-resolution LED display.
Information Displayed:
Real-time gas pressure levels.
Alarm status for each gas.
System status and fault indications.
User Interface:
Intuitive interface with easy navigation.
Test & Mute display settings.
6. Electrical Specifications:
Power Supply:
Input Voltage: 110-240V AC, 50/60Hz.
Power Consumption: ≤15W
Safety Standards: Compliant with IEC 60601-1 for medical electrical equipment.
7. Environmental Specifications:
Operating Temperature: 0°C to 50°C
Humidity: 0% to 95% RH, non-condensing
Ingress Protection: IP54
8. Installation and Mounting:
Mounting: Wall-mounted with included hardware.
Connections: Quick-connect fittings for gas lines and secure electrical connections.
Installation: To be installed by certified technicians.
9. Compliance and Safety:
Certifications:
CE marked.
Compliance with ISO 13485:2016. (Medical Gas Pipeline Systems).
Compliance with NFPA 99 (Health Care Facilities Code).
Safety Features:
Overpressure protection.
Short-circuit protection.
Surge protection.
10. Maintenance and Calibration:
Maintenance:
User-friendly access for maintenance.
Regular maintenance checks recommended every 6 months.
Calibration:
Factory calibrated with a recommended recalibration interval of 12 months.
On-site calibration capability with provided software and tools.
12. Warranty:
Standard Warranty: 1 years for all components.
13. Documentation:
Compliance Certificates: Provided for all relevant safety and performance standards.
Негізгі бет 1 GAS Digital Alert Alarm (MAP)
No video
Пікірлер