Quite possibly the coolest boat EVER! Glad we met while you were in Dayton TN. Looking forward to your next build, and good luck in Florida!
@samthompson1270
3 жыл бұрын
Wow! What a great video from start to finish. I don't know if you've noticed it or not, but your editing skills have constantly improved over the years. It's one thing that you're a magician on building things, but you're also great at putting videos together. So happy for you and getting to see you put the "Dream Boat" together. Thanks for taking us along on the journey.
@JDSOutdoors
3 жыл бұрын
Even from the beginning of this video to the end the change is pretty drastic I noticed. Just in the video quality to loosing the logo in the corner I was shocked myself just watching it. Thank you for the kind words I can't wait for the dream jet to finally start.
@douglasvancerr4563
3 жыл бұрын
@@JDSOutdoors pl. P
@hughfox3978
2 жыл бұрын
InstaBlaster...
@jdog4534
3 жыл бұрын
Nice beach landing to finish an awesome build video. This is the best one I've seen on the subject so far.. .. keep up the good work
@michaelsfabwork2985
3 жыл бұрын
Bad ass little boat. Hell yea. Great build. Take care and stay safe
@chris9389
3 жыл бұрын
So rad!! I've been wanting to build something like this for a long time now!
@JDSOutdoors
3 жыл бұрын
Do it. If you have access to the tools its really not to bad to do. Heck of a lot of fun as well.
@sammyrothrock6981
2 жыл бұрын
Excellent job you have much to be proud of!
@jimmybrooks1531
3 жыл бұрын
Like the nose longer than others I’ve seen. And boat deeper. COOL.
@ickukln
3 жыл бұрын
Awesome simply awesome 👏
@maga_q_anon8384
2 жыл бұрын
Nice build.. But gotta say.. I didn't see any cleaning of aluminum before you welded..
@erikmakitalo6342
3 жыл бұрын
love it!
@bixik77
3 жыл бұрын
Nice build! How thick is your material and how deep did you cut to make the bends in the bottom?
@darrenthompson2295
2 жыл бұрын
Awesome!!
@krotchlickmeugh627
2 жыл бұрын
Youre printing hella hard through like half of this. Lmfao i love it. From the outline id say you have a g19 or 43
@DiabloOutdoors
2 жыл бұрын
Nice!
@notwocdivad
3 жыл бұрын
Surely when you run up the sand it will fill the impeller intake and housing? It will be like grinding paste next time you start it? Not that I know much about those modes of propulsion?
@JDSOutdoors
3 жыл бұрын
I would rinse it out but yes pumping sand eats wear rings. They are only 40 bucks and you can't put a price on a smile.
@puppygadget3189
3 жыл бұрын
Curious if you turned on the GPS to see how fast she tops out at? Great job.
@JDSOutdoors
3 жыл бұрын
I got 50mph a few times. Most of the time 48mph was the fastest
@puppygadget3189
3 жыл бұрын
@@JDSOutdoors Thats pretty good.
@s.a.stewart2743
3 жыл бұрын
Probably could have sold the donor hull until you cut it up and then dropped it from the forks of a skid steer. Plenty of folks need good fiberglass for their wave runners.
@JDSOutdoors
3 жыл бұрын
Tried to sell it for 2 months. Even tried to give it for free. Nobody wanted it so I saved myself some time and cut it up
@Gcrilla
2 жыл бұрын
@@JDSOutdoors man that's a shame, I would've grabbed that baby in a heartbeat
@shanewoodard1632
Жыл бұрын
Did you buy the plans to cut it on you plasma table or is this your own design?
@JDSOutdoors
Жыл бұрын
I bought plans and modified them to what I wanted
@tarzanaman666
3 жыл бұрын
Wicked boat build n vid ...did u use plans or your design?
@JDSOutdoors
3 жыл бұрын
I used emperor racing plans for a base and I added my own touches to it. The current new build series is 100% my design
@oloyeadeniran8894
2 жыл бұрын
@@JDSOutdoors please is this plan available to the public for download?
@trev777
2 жыл бұрын
So awesome. Excellent craftsmanship. What kind of welder is that?
@JDSOutdoors
2 жыл бұрын
That is a millermatic 255
@annadasilva7332
2 жыл бұрын
@@JDSOutdoors what u prefer mig or tig to welder this boat?do u think a great job can be executed with both?🙏great job
@JDSOutdoors
2 жыл бұрын
@@annadasilva7332 I prefer mig. But tig is nice for those seen welds that need to be really pretty. To tig a whole boat will take 10x longer than mig
@DustinApple
3 жыл бұрын
ooooooohhh that press brake!
@JDSOutdoors
3 жыл бұрын
Comes in super handy. 62" and actually found it off of you tube. Come to find out it was a local guy who was also in to boats and jets built it and when he was done, listed it on fb for sale. Couldn't say no. I watched your build series on the jet bow fishing boat. What pump setup did you run? I can't for the life of me remember its been a couple years
@donaldfuller5041
3 жыл бұрын
Pretty cool!!! How long you figure it took? Would you build another to sell?
@JDSOutdoors
3 жыл бұрын
Yea I'd build another one took a few weeks
@lukecullett9044
2 жыл бұрын
Price?
@JDSOutdoors
2 жыл бұрын
@@lukecullett9044 with the cost of materials today it be between 35 and 40
@allana1301
2 жыл бұрын
Beutifull job 🎆👍🚤 what kind of welding machine and plasma to cut it did you recomend thank's🏄♂️🌠
@JDSOutdoors
2 жыл бұрын
I love my millermatic 255 and my hypertherm xp45
@theideasman6018
3 жыл бұрын
Awesome job. Would you sell plans. I want to make one one smaller and out of ply wood
@jamesguralski5156
3 жыл бұрын
Duct tape, handymans secret weapon
@grasser82
3 жыл бұрын
Man i want one so damn bad
@JDSOutdoors
3 жыл бұрын
They are fun
@grasser82
3 жыл бұрын
@@JDSOutdoors where can i buy one do you know
@JDSOutdoors
3 жыл бұрын
@@grasser82 you can find em online.
@justincasiere9598
3 жыл бұрын
What was the cost
@valmirbalieirojunioro-doad6403
3 жыл бұрын
Olá. Blza. Você vende o projeto Em. CAD
@breedam
2 жыл бұрын
Huh, what kind welder is that?
@JDSOutdoors
2 жыл бұрын
Millermatic 255
@Helmetingaround
2 жыл бұрын
Do you sell this laser cut plan?
@JDSOutdoors
2 жыл бұрын
I dont but they do sell them online
@GenghisKhan311
2 жыл бұрын
Plans please
@JDSOutdoors
2 жыл бұрын
Look up mini wee plans online they sell em. Gotta sign that you won't share them though without punishment
Пікірлер: 61