Thanks for the video, super helpful. None of these other reviews actually use the saw much less test out the resaw ability.
@billjonesnation
2 жыл бұрын
Thanks! I noticed that as well which is why I made this video. All I wanted to see was someone cutting would with this thing and getting good results. Hopefully this video helps with that. I may make a short video later seeing how it resews 5" of oak since there is some interest there.
@craftcreations6480
Жыл бұрын
by any chance do you have the building plans for the cabinet doors?
@davidkahler1311
7 ай бұрын
Bahahahaha
@KingoftheJiangl
7 ай бұрын
LMAO
@dbnoho
2 жыл бұрын
I find your shop refreshing. Thanks for the video.
@billjonesnation
2 жыл бұрын
I appreciate your comment. I use my shop to build things and get things done. Maybe one day if I have time, I will dress it up a little more and replace my cardboard doors!
@dbredeson77
2 жыл бұрын
Thanks for the review. Also, great video overall. I hope you continue to make more. Cheers!
@billjonesnation
2 жыл бұрын
Thanks! I will make more in the future. Just moved into a new 'workshop' (garage), so I'll have some video ideas with that.
@w9jim
2 жыл бұрын
Thumbs up for the awesome cabinet doors! :-D
@billjonesnation
2 жыл бұрын
Thanks! It gets the job done and keeps the dust out. Of course I would love fancy cabinets and doors... I could make them but there is a lot of stuff on the list before that! I don't have time to make a perfect shop.
@johnjensen5540
11 ай бұрын
I love the cardboard doors! Nice video
@demetrimeimaris6500
Жыл бұрын
Great video! Just purchased the same one!!!!!!!
@avih7311
11 ай бұрын
love the card board doors! good for you!
@billjonesnation
11 ай бұрын
Thanks ! I still have them a year later. Of course a new bench is on the list to do but it's waaaaay down there.
@Bonjour-World
Жыл бұрын
I like the bench doors ... practical :-)
@Trytec96
Жыл бұрын
I absolutely love the ingenuity with the cardboard doors haha.
@billjonesnation
Жыл бұрын
Thanks! They are still running strong! Of course I would prefer wood cabinet style doors. They are on the to-do list along with a new bench. The whole point of my shop is to build stuff for inside the house so I have a lot of projects before I get around to new doors :)
@wwfera00
2 жыл бұрын
Wait so this saw allows for larger saw changes like the 1/2 inch blade you replaced the 5/16 blade with?
@billjonesnation
2 жыл бұрын
Yes, absolutely. 1/2" is the largest this saw can accept. It says that in the manual as well. I found the 5/16" stock blade really terrible and destroyed it after a few cuts by trying to cut thick reclaimed stock. This new blade is amazing for resawing. Of course a 14" bandsaw or larger is better but that's a different price point.
@kencormiernsls
Жыл бұрын
Great video....nice that you are from Canada also....did you ever try resawing a hardwood piece....I am just about to pull the trigger on ordering this band saw and it would be nice to know ..many thanks
@billjonesnation
Жыл бұрын
Thanks for the comment. Unfortunately, I never tried a full resaw of a hardwood piece. I have cut smaller pieces of oak with no issue but those were only 1" thick. The wood I cut in the video is pretty hard. It's reclaimed wood from an old barn roof. The wood they used seems a lot better than our 2x4s these days. I moved and don't have the bandsaw setup yet and will probably wait until the spring. I would be tempted to try it if I were you. It's the only saw I found in the price range that has all the features of the higher end sawa that I wanted. Good luck!
@kencormiernsls
Жыл бұрын
@@billjonesnation thanks so much
@homehobbybuilds2450
Жыл бұрын
Great video. Can you provide a link for that Olson 1/2" resaw blade?
@billjonesnation
Жыл бұрын
I got it off Amazon. a.co/d/ha5VyIz
@therevngraham
2 жыл бұрын
I just got this bandsaw… I’m wondering where you got your re-saw blade. Thanks.
@billjonesnation
2 жыл бұрын
Hi Nick. I got the blade from amazon.ca this is the one; Olson Saw FB23370DB 1/2 by 0.025 by 70-1/2-Inch HEFB Band 4 TPI Hook Saw Blade. This is the one I used in the video which I quite like. I also bought a; POWERTEC 13186X 70-1/2-Inchx1/2-Inchx3 TPIx0.025 Band Saw Blade. I haven't used the powertec yet since the Olson works well. Once I wreck the Olson I will switch over and try powertec.
@therevngraham
2 жыл бұрын
@@billjonesnation thanks!
@kaitlynjones3572
2 жыл бұрын
Where did you get those hold down clamps at 1:30?
@billjonesnation
2 жыл бұрын
Good question. I designed them in Fusion 360 and printed them on my ender 3 v2
@torowazup1
Жыл бұрын
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🎉😎 What’s the height of lumber you can resaw on your Rikon 10-3061?
@Wohlfe
Жыл бұрын
Max height is 5" out of the box, not sure if you can add a riser or not.
@BGraves
Жыл бұрын
The specs say 5-in resaw capacity but 5 in is my finished width of the parts I expect to make. Could you do me a favor and raise it up and give me the exact measurement of clearance?
@billjonesnation
Жыл бұрын
Just measured. It is 5 1/8" from the tabletop to the bottom of the guide bearing.
@BGraves
Жыл бұрын
@@billjonesnation Thanks. Just might be enough to work for my application. I am very grateful for your effort
@patc7198
7 ай бұрын
Dude your realy busting that guys balls
@SteveHiemstraAKAspeg
2 жыл бұрын
3.5” of softwood; but do you think it can handle the full 5” with a hardwood?
@billjonesnation
2 жыл бұрын
It says it can but I am not so sure. I'm just rebuilding my workshop so I can't test a piece of hardwood now but I will try to in the next week or so. Maybe with the resaw blade I will have good luck with the 5" hardwood.
@SteveHiemstraAKAspeg
Жыл бұрын
Haha, I just watched this video again and thought it was familiar. Then came to ask this question… and I find my past self already asked it! 🤯
@billjonesnation
Жыл бұрын
Sorry I know I was supposed to cut some hard wood but I wasn't able to. Had to move all my equipment and it's not set up yet.
@0313bouchey
2 жыл бұрын
Curious, what is max re-saw ability?
@billjonesnation
2 жыл бұрын
5"
@0313bouchey
2 жыл бұрын
@@billjonesnation thank you.
@americanlivesmatter-BmanWild
6 ай бұрын
Warning: Bman Wild has just entered the chat and you *will be SUSCRIBED* 😂🎉❤
@ronaldbrennan8787
Жыл бұрын
I would not wear gloves when cutting.
@dantwomey
4 ай бұрын
Never, ever wear any kind of gloves near a spinning saw blade!
Пікірлер: 46