I ordered the parts for this project less than 10 minutes after watching this video, 10/10 This IS the way.
@TreyEversman
2 жыл бұрын
Awesome!! This is the way!
@jedinova122
Жыл бұрын
Same!
@brookwest
Жыл бұрын
Where did you order it from? How much was it? Please thank you
@thesundownersclub3983
11 ай бұрын
@@TreyEversmanhey how did you get the acrylic on there? Staple gun?
@TreyEversman
11 ай бұрын
@@thesundownersclub3983 exactly!
@Firepistol
3 ай бұрын
I found mine at home depot, for $67, I built 36 total for our starwars theme home, thanks, dude. Correction in process of building them
@TreyEversman
3 ай бұрын
That’s AMAZINGGGG!!!!
@Firepistol
3 ай бұрын
@@TreyEversman I found that one big sheet of white transparent plastic sheet works good for the background
@TreyEversman
3 ай бұрын
@@Firepistol price?
@Firepistol
3 ай бұрын
@TreyEversman ill be honest it's pricey, one roll is $150, but it's 100ft
@RonaldFoxAgency-sg6pv
10 ай бұрын
This is a stroke of brilliance. Thank you for this quick, easy to follow guide. For a Halloween set up, I am building the interior of a space ship looking out into the stars, and needed to figure out how to make the walls and BAM! Trey to the rescue. This is the Way.
@TreyEversman
10 ай бұрын
WOW!! I REALLY appreciate that! That sounds incredible! Thank you for tuning in! This is the way!
@cryptowaikoah
Ай бұрын
Just finished making 3 of these panels. WOW it's a lot of work. I bought a roll of Mylar (3ft x 25ft) and lights are going on last. What took me the longest was painting. I wanted no drips, no streaks, no peeling, etc. Had to give it a few coats with some sanding in between as the paint doesn't really stick that well and can be scratched off easily. Finally finished it up with a matte sealer to really protect the paint long term. I'll be posting them up along with some figures in a few days on my Instagram. I'll be selling them at the PlastiCon event in Hollywood, FL at the end of the month. If they don't sell I'll be VERY HAPPY to keep them! - Look me up on IG to see my post soon - And a big THANK YOU to Trey for putting this up. Spent a nice few days with my dad doing everything in the garage.
@TreyEversman
28 күн бұрын
That's what it's all about..quality time with family building cool stuff!!! Thanks for the comment..that made my day. Glad to hear the build went well and good luck with the sale (but you should really just keep them for yourself lol)!!
@carlyking
5 ай бұрын
This helped a ton!!
@TreyEversman
5 ай бұрын
Y’know it’s a good day when you have a dang Star Wars YT LEGEND up in the comments!! 🙈 Thanks for tuning in!
@rocacoshi
11 ай бұрын
This would be amazing to place behind your bed, as a night light it would be the best thing ever
@TreyEversman
11 ай бұрын
🤣 well ALRIGHT!
@BenLaurence
6 ай бұрын
Totally need to do this!!
@TreyEversman
6 ай бұрын
Heck yeah dude! Such an easy project with incredible results! This is the way!
@StarWarsFanatic
10 ай бұрын
I just ordered 2 from the Home Depot for $75 each. My new home office is going to look amazing!
@TreyEversman
10 ай бұрын
That’s awesome! I need more space for more walls! 🤣🤣
@starwarsarchitect
Жыл бұрын
Awesome video! Had no idea they carried the exact cut out of the imperial background 😂 found it at HD for $75 ✊
@TreyEversman
Жыл бұрын
It’s a cheat code! Lol! Thanks for tuning in!
@CuckooCulture
Жыл бұрын
Ok I officially know how I want to do my home studio now! You are so awesome for this! May the force be with you!
@TreyEversman
Жыл бұрын
Well that isn’t fair..I want a home studio!! 🤣 Thanks for tuning in and may the force be with you!
@AWFishy
Жыл бұрын
You're the MAN! THANKS 😊 Going to go to town on my Man Cave now!
@TreyEversman
Жыл бұрын
This is the way!! 🤜🤛
@sikxrin
Жыл бұрын
Thank you for being so good at life 😩🖤
@TreyEversman
Жыл бұрын
I wishhhh..I'm just winging it and hoping I make it one day at a time but fankkk yewwww 🥹
@thekingofnot8453
2 жыл бұрын
That looks beautiful
@TreyEversman
2 жыл бұрын
Thanks so much! Pretty easy build too!
@DarthRageReviews
Жыл бұрын
I did the same thing, I used a photo backdrop cloth as a background and it worked great!
@TreyEversman
Жыл бұрын
I like that! 🙌🙌
@DjNotNice85
11 ай бұрын
which photo back drop did you use? pics of it on?
@DarthRageReviews
11 ай бұрын
@@DjNotNice85 I ordered a studio lighting kit off wish that came with a black, chromakey green and white photodrop cloth, I used the white cloth. A white sheet should work also.
@cryptowaikoah
Ай бұрын
Hi. I bought a roll of Mylar Stencil Sheet with a thickness of 14 mil to avoid doubling up with the smaller sheets. Also the roll is 3 feet by 25 feet, since I'll be doing a few of these. Hopefully it'll go smooth.
@TreyEversman
Ай бұрын
Very nice! You got this..may the force be with you!
@gansta8894821
Жыл бұрын
I've been waiting to buy this thing, but I didn't know how I was going to build it to look like the movie. Now that I've seen this video, I have ordered my parts. I got lucky and got the panel for 86 bucks.
@TreyEversman
Жыл бұрын
This is definitely a cheat code! Yeah, the panels went up in price for a time and seem to have come back down. Thanks for tuning in!
@Ragnarok6664
Жыл бұрын
Imperial design 👌🏻
@TreyEversman
Жыл бұрын
Perfect imperial addition to any room!
@extremeboatdockingmedia
2 жыл бұрын
Awesome. It’s cool seeing how you make stuff!
@TreyEversman
2 жыл бұрын
Thank you!! Can't wait to see the FPV stuff you shot with Tony..I may need an FPV lesson! 😎
@shadowr2d2
Жыл бұрын
Thank you for posting this video 🎉. You have a new subscriber. Keep up the great work 🎉. I have a small tool shed. That I’m looking into turning. My very own Space Ship. A Mandalorian bounty hunter ship / Man cave. You are so freaking awesome 😎. Can you do a Floor, or ceiling. With some RGB of course.
@TreyEversman
Жыл бұрын
I really appreciate that! Oh wow that sounds epic!! 🤘🤜🤛
@martinwild8424
10 ай бұрын
Looks well 👍
@TreyEversman
10 ай бұрын
Thanks so much!!
@jordanm6700
Жыл бұрын
I’ve been wanting to do this for a while now, but was always put off by the amount of tools/craftsmanship needed through other tutorials. This is by far the most user friendly and budget friendly guide I’ve come across. Quick question: Did you use two layers of the Mylar sheets? Thank you!
@TreyEversman
Жыл бұрын
That made my day! I appreciate that and appreciate ya tuning in! I did use two layers..you could even do a third but one layer was just not enough for me..you could still see the individual LEDs. Stapled them in and good to go! Cheers!
@jordanm6700
Жыл бұрын
@@TreyEversman Project Complete! Can't thank you enough for this tutorial. I followed your blueprint for the most part, just making a few tweaks here and there. Most notably, I didn't put any lights along the sides of the back panel and went with a darker paint color (Sherwin Williams' Iron Ore in a flat sheen from their Duration series). I've uploaded a few pictures of my final build below. drive.google.com/drive/folders/1v7G6uPH35aWOVECVrVqC1QFF5EqiStYN Thanks again - you're an inspiration!!!
@TreyEversman
Жыл бұрын
@@jordanm6700 that IS awesome!! I really appreciate the update..thanks so much!
@justlanchen
8 ай бұрын
Genius!!!!
@TreyEversman
8 ай бұрын
Thanks so much!!
@djlee688
2 жыл бұрын
Awesome, thank you.
@TreyEversman
Жыл бұрын
🙏 🙏 🙏
@antwaynetube
2 жыл бұрын
Nice work.
@TreyEversman
2 жыл бұрын
Thanks so much! The problem with having one is now I need more 🤣🙌
@antwaynetube
2 жыл бұрын
@@TreyEversmanThanks for sharing your tips. I bought two panels from Wayfair when they were $75, but I have been looking for ideas to build and mount them. How many feet of LED strips do you think you used?
@TreyEversman
2 жыл бұрын
@@antwaynetube I put the link for the led strips I used in the description I would say AT LEAST 75 ft (I didn’t use all of the 100ft) especially if you go around the outside of the frame and in between the holes. I will be adding more screws at the top and side for my next one..ones in the center top& bottom but the liquid nails is holding up. Hope this helps!
@jeremiahvignali4188
Жыл бұрын
Thanks!
@TreyEversman
Жыл бұрын
THANKS SO MUCH!!!
@AstoriaWorkshop
7 ай бұрын
Hey friend! Could you run by me how many feet of lights you needed to accomplish this? It’s the up and down stripes that worry me, that looks like a hell of a lot of feet to cover.
@TreyEversman
7 ай бұрын
I used 1.5 boxes and link in the description! Thanks for tuning in!!
@marktecher3085
7 ай бұрын
That is Cool
@TreyEversman
6 ай бұрын
Thanks so much!
@Jespata
5 ай бұрын
This is awesome !! I'm building one right now ! .. Question .. on the Mylar sheets -did you use two layers on each of the hole cut outs or is that just one layer and cut to fit?
@TreyEversman
5 ай бұрын
Thanks so much! I doubled up but I know some on here are going triple..double was good enough for me! Thanks for tuning in!
@reedstone2510
2 жыл бұрын
Definitely going to do this, any tips for how you cut the sheets or can u explain your process with doing that
@TreyEversman
2 жыл бұрын
The sheets aren't cut at all! That's the size it comes. 🙌
@theonecalledvino8165
7 ай бұрын
Boba was getting it
@TreyEversman
7 ай бұрын
🤣🤣🤣
@deaconweekley3893
5 күн бұрын
I just made mine! The thing that sucks is the leds short out when you try to use red
@TreyEversman
5 күн бұрын
@@deaconweekley3893 maybe that’s a sign to change your kyber crystals? 🤣🤣😜
@deaconweekley3893
5 күн бұрын
@@TreyEversman maybe it has a green hue no matter what color is used
@TreyEversman
5 күн бұрын
@@deaconweekley3893 not terrible!
@markhansen9819
6 ай бұрын
love this project - i am curious about how you got the leds to turn the tight corners seems like there are alot of them going back and forth between lattice
@TreyEversman
6 ай бұрын
The led strips are quite flexible and easily bendable. Hope this helps and thanks for tuning in!
@Ohmeezzy
Жыл бұрын
What length did you cut the wood too? Did you cut them into exactly 3’ x 6’ segments
@TreyEversman
Жыл бұрын
Hey there! I measured them up with the sides of the panel. I think the top is like 33 & 5/8 and I fit in the side two pieces after that. Hope this helps!
@slayaa
11 ай бұрын
Did you put 2 layers of the mylar on there? I didn't quite follow that part. Great tutorial! I almost just bought some of these panels for $600 and I'm so glad I youtube'd before I pulled the trigger lol
@TreyEversman
11 ай бұрын
LOL! Well I’m glad ya didnt! 💀🙈 I linked the sheets I used..I used 2 layers and depending on your preference, you could even go another layer. WAYYY more cheaper than $600 for sure! 🙃 Hope this helps and thanks for tuning in!
@slayaa
11 ай бұрын
Ok awesome! Thanks for the reply and I'm excited to get started on this!@@TreyEversman
@TreyEversman
11 ай бұрын
@@slayaa May the force be with you..🙃
@insultcomicdog
Жыл бұрын
Are leds in centre of panel facing the wall? You can see the leds around the perimeter. Would it be better to have these also face the back wall instead of firing sideways?
@TreyEversman
Жыл бұрын
Personal choice I suppose! I can’t notice them for the most part. 🤷♂️
@rajeshpersaud5217
Жыл бұрын
As shown in the video, I tried aligning the LEDs along the perimeter walls, but I didn't like how the LEDs were visible on the sides, so I removed them and have them facing the wall like the rest of the strips. It worked perfectly just by tucking it around the edges tightly.
@djlee688
2 жыл бұрын
Trey, can you do something similar but in the shape of the Death Star 👍
@TreyEversman
Жыл бұрын
I've got a few projects in the works right now but that sounds awesome! The best thing with this project is you can buy the panel just like that..it's how it comes!
@sikxrin
11 ай бұрын
Hi friend. I’m back to see if I can do this 😁
@TreyEversman
11 ай бұрын
Hahaaa you absolutely can!! YOU GOT THIS!
@sikxrin
11 ай бұрын
@@TreyEversman I find your faith disturbing 😅
@TreyEversman
11 ай бұрын
@@sikxrin “Your focus determines your reality.” - Qui Gon Jinn
@tb309
10 ай бұрын
I'm building 3 right now. Thank you for the detailed list and directions. I do have 1 question. I'm using the sheets you got from Amazon. Did you duel layer it or single layer it? The video looks like you put a 2nd layer on. Thanks !
@TreyEversman
10 ай бұрын
That’s amazing!! Thanks for tuning in! I did double up..my apologies if I didn’t mention that. I’d def recommend 2-3 layers. 2 was just fine for me. May The Force Be With You!
@rnguyen2516
Жыл бұрын
Wow, this is such an amazing idea, Trey! Thank you so much for sharing! What did you use to light it up?
@TreyEversman
Жыл бұрын
I really appreciate it and thanks for tuning in!! I linked the LED strips that I used in the comments. Thanks again!
@rnguyen2516
Жыл бұрын
@@TreyEversman ohh I see it now. Thank you so much for linking everything that you used! I can’t wait to try this. Thank you so much for making it attainable for us commoners, lol. My son will love this in his room!
@TreyEversman
Жыл бұрын
@@rnguyen2516 the videos are a lot of work but hearing that your son is gonna have one awesome room makes it so worth it! Good luck on your build and let me know if you have any questions!
@peterlucus2062
3 ай бұрын
@@TreyEversman Hey Trey I'm doing my build soon. How many ft of the led strips did you need total?
@TreyEversman
3 ай бұрын
@@peterlucus2062 awesome! I bought 2 boxes of the led’s in the description and used about 1.5 🙌🫡 Good luck..you got this!
@LadyBarnes87
2 жыл бұрын
Awesome build! What were the cut lengths for the frame pieces?
@TreyEversman
2 жыл бұрын
In all honesty, I just lined them up with the frame and the made the cuts. Worked perfectly!
@mattt5528
Жыл бұрын
Thank you for this video! This is an awesome idea. I’m doing this project right now an so far so good. I’m up to the Mylar sheets step. What was your process for cutting these?
@TreyEversman
Жыл бұрын
Thank you!! I kinda freehanded it, I would try to cut the sheets to at least cover a couple of holes at a time. Worked out perfectly! Thanks for tuning in!
@waikoah4467
Ай бұрын
Won’t the staples from the staple gun go through towards the front when putting the Mylar? Are they shorter than regular ones? I have everything for 3 panels including a roll of Mylar (3x24ft) so it’ll be less tedious. Teeediiioooouuusss.
@TreyEversman
Ай бұрын
Hey! I just checked for you..they are the 1/4'' 6mm staples. Hope this helps and good luck!
@rizencomics9145
2 жыл бұрын
WHY DOES THIS NOT HAVE MORE LIKES?!!!! Its free people. DO it
@TreyEversman
2 жыл бұрын
DO ITTTT PEOPLEEEE!!! Lol..thanks!
@malindner
Жыл бұрын
This is incredible. I'm doing it. Do you think you could install the RGB strips on every other vertical rather than on each one to cut down on materials?
@TreyEversman
Жыл бұрын
Do itttt! You could but I think your light output or glow would be far less. 🤷♂️
@Just_Futzing_Around
8 ай бұрын
Stencils Online sells Mylar rolls. I found a 36” x 10ft roll (14mil thickness being you doubled yours) for $53-ish per roll. Wonder if this would make the job easier?
@TreyEversman
8 ай бұрын
Interesting! Let me know how it goes but that sounds like a great option!
@Luke-zt8fq
Жыл бұрын
Did you glue the mylar sheet or how you adherethe mylar sheets?
@TreyEversman
Жыл бұрын
I used a staple gun 🙌🙌🙌
@rajeshpersaud5217
Жыл бұрын
I used a full-size glue gun (do not use the mini-gun!) and it did the trick!
@js100percent2
Жыл бұрын
#Broskiilorian!!! This is the cheapest Way! Love it! #BroskiiWanKenobi 🤙out!
@TreyEversman
Жыл бұрын
🤣🤘🤘🤙🤙🤙
@arni7810
Жыл бұрын
Great video. I'm going to start mines next weekend. Question on the mylar sheets, Is 10 pack 7.5 mil sheet the ones to used?
@TreyEversman
Жыл бұрын
Thanks so much for tuning in! I linked the ones I used in the description. I used 2 packs. Good luck on your build! Let me know if you have any other questions!!
@arni7810
Жыл бұрын
@@TreyEversman np. I went to your mylar sheet link to buy, but there's different sheets like 7.5 mil ect ect. Which one is the one to use? Thanks in advance.
@kkxi2289
Жыл бұрын
Any problems with the LED’s starting to die out? Was thinking of getting LED panels but this is so much cheaper and more affordable
@TreyEversman
Жыл бұрын
Not at all! I keep them at least a few hours a day EVERY day. They would be superrr easy to replace if that did happen. I feel like it took YEARS for any to burn out behind my desk and they are constantly on. Hope this helps and thanks for tuning in!
@topregele6582
Ай бұрын
And if i don't find anymore that garden wall. How can i make step by step the star wars wall? Because i don't know the measurements height lenght and also how big need to be that forms wall from the inside 🤔
@TreyEversman
Ай бұрын
I haven't done a custom one but there has to be a tutorial somewhere online! Good luck!
@cfit421
Жыл бұрын
What would you suggest for a 9 ft tall wall, since these are only 6 ft tall? They go from ceiling to floor in TDS. Also, you said we need 2 packs of the mylar sheets. It comes in a 10 pk, so is that sufficient or do we need to order two of the 10 packs?
@TreyEversman
Жыл бұрын
Hmmm I think possibly adding in a top and bottom base adorned with other wall details from the DeathStar would be a nice touch and probably the easiest. Another idea would be to cut 1.5 ft pieces and lining them up with your full piece..(you’d have to cut your full piece so the circles match up) then attach to wooden frame, cover your lines with wood filler, sand, paint and BAM..frankensteined 9footer. I got 2 packs of Mylar because I wanted to double up on them..your preference!
@ichawksfan
2 жыл бұрын
Is the paint semi-gloss, satin or flat? Also, how long are your LED strips?
@TreyEversman
2 жыл бұрын
Hey there! I got the Matte/flat version of that paint. The led strips are linked in the description..the 100 ft ones but you'll have some left over. Hope this helps!
@ichawksfan
2 жыл бұрын
@@TreyEversman I bought 65 ft. Hope that will cover it.
@jimmyolivares9856
2 жыл бұрын
@@ichawksfan did 65 ft work for you
@ichawksfan
2 жыл бұрын
@@jimmyolivares9856 I'm still waiting for the panel to come in.
@jimbalz3017
6 ай бұрын
When I did this, I used the stickum on the LEDs to adhere them down, and the LEDs face backwards. There's very little light shining through. If I turn the LEDs around, They're bright spots. How'd you deal with this?
@TreyEversman
5 ай бұрын
You can double or triple up or even more on your Mylar sheets depending on your preference. The more sheets the better the light will diffuse and you’ll see less of the bright spots. I doubled up on mine. Hope this helps!
@Jespata0822
2 ай бұрын
Trey, any suggestions om how to keep the mylar sheets from waving up or down when your stapling them down.. im using heavy duty staples.. could this be the issue?
@gothboschincarnate3931
Жыл бұрын
by now you must know i can never be turned from the force!
@TreyEversman
Жыл бұрын
This is the way..
@gothboschincarnate3931
Жыл бұрын
@@TreyEversman have any plans on making a jedi meditation room? it would require a portal.
@TreyEversman
Жыл бұрын
@@gothboschincarnate3931 haha that’d be amazing but not at the moment!
@gothboschincarnate3931
Жыл бұрын
@@TreyEversman cools...never tried to make a portal from a distance. always wanted to try. 3.2's and astral portals are my specialty. i would let you handle the physical details. post right on youtube if you ever do.
@coreyg4262
Жыл бұрын
How much of the quart did you use to paint this?
@TreyEversman
Жыл бұрын
Sorry for the late response! I just did the shake test..I would say I used about half!! Thanks for tuning in!
@jedinova122
Жыл бұрын
Trey, what kind lights and how many rolls? Are they battery powered?
@TreyEversman
Жыл бұрын
Hey there! I put the link to the LED strips I used in the description. I used 1.5 rolls..they are plug into the outlet and have a remote control for all the different modes. Cheers!
@kurtmueggenberg4330
Жыл бұрын
Did you double up the mylar sheets? It looks like you have 2 layers. Thanks!
@TreyEversman
Жыл бұрын
I did! I would do 2 if not 3..your preference! Thanks for tuning in!
@Obi_Wan
Жыл бұрын
Why did you cut the mylar sheets with the rounded corners instead of just laying them down in the full rectangle shape?
@JumpmanJedi
10 ай бұрын
Would you say the Millenium silver is the best look for this? I found imperial gray and am now conflicted between the two.
@TreyEversman
10 ай бұрын
I've never done a comparison test between the two but I saw the Millenium Silver mentioned A TON in the Star Wars Room Builders group on FB and it's readily available at Home Depot if you're in the US. Let me know how it goes if you opt for the Imperial Gray! 💪
@JumpmanJedi
10 ай бұрын
@@TreyEversman thanks for the reply! In the US, just indecisive lol. Just trying to match the accurate Death Star color scheme. I’ll look into that Facebook group too! Thanks again!
@JumpmanJedi
10 ай бұрын
@@TreyEversman thanks for the reply! In the US, just indecisive lol. Just trying to match the accurate Death Star color scheme. I’ll look into that Facebook group too! Thanks again!
@TreyEversman
10 ай бұрын
@@JumpmanJedisomebody legit just posted a side by side pic of the two colors on the FB group!! Imperial gray looks way too dark IMHO! Check it out over on there! 🙏💪
@JumpmanJedi
10 ай бұрын
@@TreyEversman that was me good sir! 🤣 definitely going with Millenium. I appreciate it man.
@Nairb1007
Жыл бұрын
Ugh I put the 2x1’s flat instead of vertically. Now there is not much spacing from the lights to the edge of the design. All well.
@TreyEversman
Жыл бұрын
Dang..maybe you could double stack the flat 2x1s..not the most ideal but it would give you more depth to your already started frame. Just a thought!
@Nairb1007
Жыл бұрын
Ended up taking them off and doing it right.
@TreyEversman
Жыл бұрын
@@Nairb1007 this is the way
@jayschmidt9977
2 жыл бұрын
Could you add a link to the lattice panel. I’ve been searching but no luck.
@TreyEversman
2 жыл бұрын
Got you! I'll put in it the description..my b!
@joisenpaii
2 жыл бұрын
Can you explain how you did the light strips?
@TreyEversman
2 жыл бұрын
Yep! So the string lights I used are in the description. I used about 1.5 wheels in the box. First, I drilled a hole in the side of the bottom for the plug then I started the led strips on the bottom outside..went all the way around the outside frame then started on the panel itself and went up and down in between the holes of the panel. HOPE this made sense! Pretty simple. Let me know if you have any other questions!
@arni7810
Жыл бұрын
Hey will 100ft of the led strips enough for the entire wall?
@TreyEversman
Жыл бұрын
Depends on if you do the sides or not! I used 1.5 boxes of the LEDs. Hope this helps! Thanks for tuning in!
@arni7810
Жыл бұрын
@@TreyEversman oh ok. Thanks
@gamerofnorway6625
3 ай бұрын
i live in norway and its imposible to get 3'x6' Optic Decorative Screen Panel, Black,. wæææææææææææææææ
@TreyEversman
3 ай бұрын
Dangggg..I’m sorry 😭😭
@gamerofnorway6625
3 ай бұрын
@@TreyEversmansuper video, i am going to make it anyways just by hand😂
@TreyEversman
3 ай бұрын
@@gamerofnorway6625 that’s the spirit!! Best of luck and may the force be with you!
@thanosj3div401
Жыл бұрын
Have the light strips tape held up still?
@TreyEversman
Жыл бұрын
Oh for sure! Pretty solid adhesive on the back of these. 👍
@savvymoss
Жыл бұрын
how did you attach rhe mylar sheets? glue? tape? thanks
@TreyEversman
Жыл бұрын
Staple gun..super quick!!
@Smarteebee
Жыл бұрын
did i see that correctly? You put 2 layers of Mylar sheets?
@TreyEversman
Жыл бұрын
Yep! I added a second layer for better light diffusion. I would at least do 2 if not 3 but it’s up to your preference. Thanks for tuning in!
@Smarteebee
Жыл бұрын
@@TreyEversman thanks for making the video. I've been hesitating but lattices just went on liquidation at Home Depot in Canada (equivalent of 18 bucks USD). Couldn't resist. What do you think the 3rd layer would help with? I noticed you can still see the individuals lights when looking at the side but it's really not a big deal.
@TreyEversman
Жыл бұрын
@@Smarteebee I saw that HUGE discount in Canada..that’s wild!! The third layer would diffuse the light even more and probably cut down on seeing ANY individual lights. To me, it really isn’t that bad. I would scoop some more up but they are still the same price here in the US 🤣🙈
@Smarteebee
Жыл бұрын
@@TreyEversman just came back to watch how you put the second layer of sheets. was hoping i wasn't going to have to cut around them again but like you said.... tedious. Not sure i wan't to go 3 layers lol
@TreyEversman
Жыл бұрын
@@Smarteebee lol tedious is the exact word! 🤣 YOU GOT THIS
@pucho69
Жыл бұрын
Did you use the 100ft of led lights??
@TreyEversman
Жыл бұрын
1.5 on the LEDs that I put in the description..not too bad!
@dudesarcade
Жыл бұрын
Just started putting down the Mylar and the staples are bending and not very solid. I was thinking about using some spray can glue instead. Any thoughts?
@TreyEversman
Жыл бұрын
Interesting! Mine staple gun worked out perfectly! Hmmmm..I can’t say I’d go the spray can method personally (messy, not a lot of control) so if it were me, I’d probably use a hot glue gun and just do dots of hot glue around the openings. I think this would be the ticket for me..hope this helps & May the force be with you! 🙌
@dudesarcade
Жыл бұрын
Just tried some spray glue. This is not the way ! Rolling might work. This is awesome! I want to do one as a test. So this one is just working it all out. To complete a wall I will need 4 more. Such a good find! You got my sub! Now im wondering how much for a cut sheet of mylar? HAHA I'm lazy.
@TreyEversman
Жыл бұрын
@@dudesarcade I figured it WAS NOT the way lol! Dude..a whole sheet to fit these 💰💰💰 🤣🙌 Thanks for tuning in!
@dudesarcade
Жыл бұрын
@@TreyEversman Hey what about daisy chaining the lights? I'm gonna build another couple panels and would like to have them syned to 1 remote if possible.
@TreyEversman
Жыл бұрын
@@dudesarcade yep..I daisy chained 2 packs together. I don’t think I totally used all of the second strand tho. Daisy chained and one remote. 🤙
@MightyHeidi
10 ай бұрын
What type of wood did you use please?
@TreyEversman
10 ай бұрын
Hey there! Google "1 in. x 2 in. x 8 ft. Furring Strip Board" from Home Depot. That's exactly what I used. Hope this helps! Thanks for tuning in!
@siemfannes9322
Жыл бұрын
Does anyone know how to easily make the holes in wood
@TreyEversman
Жыл бұрын
A drill bit?
@saltymcnuts1697
11 ай бұрын
What about a Hans Solo carbonite wall hanging?
@TreyEversman
11 ай бұрын
I may or may not be trying to make that next 👀👀👀
@Conner._.Anderson
Жыл бұрын
Is it possible to further diffuse the sides so that you don't see the light "bulbs" through the mylar?
@TreyEversman
Жыл бұрын
Absolutely! You would just need to add more layers or plastic. Cheers!
@Conner._.Anderson
Жыл бұрын
@@TreyEversman ok great I will try that when the materials come in thank you.
@daviddelancett7807
Жыл бұрын
@@TreyEversman Great job with this. I have the lattice panels and I wondered if you didn't put the lights on the sides if that would answer Conner's question about not seeing the "bulbs" on the sides? In other words, just up and down in between the openings shining straight back. Your thoughts? You did a nice job, thanks for the video. David D.
@TreyEversman
Жыл бұрын
@@daviddelancett7807 thanks for tuning and for the feedback! I think it’s definitely a possibility but I figured the more lights the better! Maybe doubling up on the back up the lattice is the ticket? Keep me posted on your build!
@stephaniebeautywells-4seas567
11 ай бұрын
This is more than $100 in materials
@TreyEversman
11 ай бұрын
I blame inflation 😂 At least the garden lattices have come back down in price. 💪
@marboba
Жыл бұрын
How many feet of rgb?
@TreyEversman
Жыл бұрын
LED strips linked above in the description. I used 2 boxes! Hope this helps!
@marboba
Жыл бұрын
@@TreyEversman thanks sorry didn’t see the links before I found a 100 ft with Alexa and giggle up in Canada these sheets are on clearance at Home Depot for 24$ Canadian I bought 12 lol
@TreyEversman
Жыл бұрын
@@marboba ship to U.S.?? 💀💀🤣🫶💀
@marboba
Жыл бұрын
@@TreyEversman i think shipping would kill the price our rates in canada suck these days.. what was the length of the screws you used.. 1-1/2"??
@marboba
Жыл бұрын
@@TreyEversman what size screws 1-1/2”?
@RyanByrne999
Жыл бұрын
Did anyone else cringe when he said far, far and away?
@TreyEversman
Жыл бұрын
Does anyone else cringe when internet trolls with 2 subscribers come out of hiding? 🙋♂️🤣
Пікірлер: 217