Good job on your first video, I'm thinking about starting a channel myself because I work on and build everything-literally, I see a lot of people just asked a bunch of questions without doing any other research on other videos, that could get a little annoying I would think, I enjoy helping people but man do a little footwork yourself, I subscribe to you to help you get started and best of luck to you, maybe in the future I might want to pick your brain a little bit if have a question about starting my own channel if you wouldn't mind answering them, I may run into challenges you may have run into, I've done a lot of research already on starting a channel but I'm sure there's stuff I haven't came across yet, peace
@garybork923
3 жыл бұрын
Nice work! Great video helped me a lot! Thank you✌️
@K3ZZ4_07
2 жыл бұрын
I fit my old clutch in and it started but after I shut it off it slipped and it wasn’t engaging again is there anything I could do?
@murphhx6637
3 жыл бұрын
This video acctually helped me a lot Thankyou
@brianperez379
7 ай бұрын
First off where you said there's the problem yeah the problem is it didn't even have a bolt to fasten down the clutch because it wasnt suppose to just come off like that after you took those pieces out 😂
@oldguyBMX
Жыл бұрын
So u didn't replace the gasket? I need to replace the clutch cover on my coolster 125 it's busted and leaking all the oil out really bad. I have a new cover but it didn't come with a gasket or new kicker seal. Any idea where I can get those items?
@progamernikolass3011
27 күн бұрын
What's the name of that thing you used to tighten the clutch with the drill when you said you weren't a fan of hammer and screwdrive
@1989Rangerxlt
4 ай бұрын
Yes my 125cc is manual shift. I would like to find out is it a simple swap of clutches to a automatic one?
@paulofaria976
3 жыл бұрын
I have exactly the same engine with the same problems
@slimey831
3 ай бұрын
What happens if you don't fold the tabs in?
@fatbongripz4207
2 жыл бұрын
I cant get the lock but to come loose. Even with the lock nut tool I cant get a good grip on the basket. 😡
@garniful
2 жыл бұрын
Thanks for sharing this thumb 👍 up video, 11:40 I thought 🤔 clutch should not have to be engaged to gears as the engine is not highly removing. It is confusing because I am not well familiar with these things ✋🌹
@garniful
2 жыл бұрын
11:33
@Jweiss7939
3 жыл бұрын
The part I needed to see is: You have a little Spring, a little Tube and then the larger lipped cylinder. Which goes in first? The spring? The tube or?? My clutch doesn't disengage. Can you tell me the orientation of those 3 pieces? Someone else had it all removed. Any help will be greatly appreciated. Tia.
@schpoingle
2 жыл бұрын
large lipped cylinder, spring and then little cylinder around spring. i assume you found out already
@chrisv9966
2 жыл бұрын
@@schpoingle bro u dont know how much this saved me 😂
@k5boy805
2 жыл бұрын
What kind of oil and howmuch
@mitchellmanning8064
8 ай бұрын
whats the name of the bike, cheers!
@kennymoffat369
3 жыл бұрын
My son has 125cc similar bike,, sometimes it kicks and feels compression and other times Kick-start just feels like it's slipping with nothing felt and no rotation,,, would you advise Kick-start shaft or clutch????
@slimsqde7397
3 жыл бұрын
make sure your clutch cable is adjusted properly, on chinese bikes if you pull the clutch in the kick starter wont engage
@jmsbrynt
3 жыл бұрын
Where does the clutch cable go on these? trying to throw that engine on my old frame but can’t find the clutch arm
@justinbeam8344
3 жыл бұрын
Right on top the right side of the the motor I believe
@tommorgan2368
3 жыл бұрын
Thanks helped me out a lot
@nikgy
3 жыл бұрын
nice thanks
@disasterwarehouse8363
3 жыл бұрын
The 4 screws on the clutch outer cover, mine are tight as hell and stripped one when I try remove them.. How can I get them out they feel like butter when I put a screw driver in them?! Giving me a right headache.. Cheers pal
@thelagmeister
3 жыл бұрын
Try a hand impact screwdriver.
@disasterwarehouse8363
3 жыл бұрын
@@thelagmeister thats exactly what worked in the end.. hammer and a impact driver. Cheers!
@volkov6460
2 жыл бұрын
@@disasterwarehouse8363 i ordered an impact driver to attempt this, still didnt work so i grabbed an angle grinder and made a slot myself and ordered a whole new clutch set
@dillenchaniceursuabelt9845
3 жыл бұрын
Do you have the link for the full clutch?
@dylanstossel4608
3 жыл бұрын
do we need to soak the clutch in oil before installing?
@Toksikki
3 жыл бұрын
4:40
@thelagmeister
3 жыл бұрын
I would definitely soak the clutch.
@TwoDudesFunny
Жыл бұрын
this happend to me only one bolt was left
@keithmuse7532
2 жыл бұрын
your hands block everything smh
@jackthebiker6857
4 жыл бұрын
What did you do with that little spring at the end
@purgefinx
3 жыл бұрын
He just putted that baack there. My 110cc pitbike clutch is also broken gotta check this video couple times to remember and learn some
@lisa-pi3qg
3 жыл бұрын
@@purgefinx what engine brand do u have i need to replace my clutch could do with some help
@tommorgan2368
3 жыл бұрын
Locking washer
@zain4952
4 жыл бұрын
Hello mate what’s that left sprocket thing called. Mines broken.
@justinbeam8344
4 жыл бұрын
I would guess it would be called the drive sprocket idk if that's what it's called but it drives the transmission
@alanbrown9652
2 жыл бұрын
It’s not a great video if you got your fat fingers in the way where does the spring go
Пікірлер: 43