Three of the coolest ATVs ever made imo: Banshee 350 , TRX 250R, Suzuki Quadzilla 500
@banshee100
5 жыл бұрын
Yes sir
@johnsmith-oh2xo
4 жыл бұрын
Your forgetting the first 2 stroke four wheeler the suzuki lt250r great quads..................
@MrATOMBOMB420
4 жыл бұрын
And I have two of those best ones a nasty 250R and nasty 421 banshee
@MrATOMBOMB420
4 жыл бұрын
And I just got rid of lt250r done to the nuts
@jerrythechainsawguy8100
6 жыл бұрын
You’re still not dead? I figure that banshee was gonna kill you within 2 weeks. You must be a good rider.
@banshee100
6 жыл бұрын
Jeremy Brown yea pretty good been riding fast stuff since 8 years old,when I had a 250r
@jerrythechainsawguy8100
6 жыл бұрын
Hey, it shows. I have rode a few banshees in my day. Some modified ones etc. if I could get enough seat time in, I know I wouldn’t be afraid of them. It looks like you put in the time, you can predict what it does. Kudos to you. I just **** my pants when they lose traction in 3rd or 4th.
@banshee100
6 жыл бұрын
Jeremy Brown did you watch the other vid on the pavement? When it hooks
@kevinAuman1
6 жыл бұрын
hellcat channel one badass vidya I'd have to say haha
@banshee100
6 жыл бұрын
Thanks man
@Jordan-hl5hj
6 жыл бұрын
That 4 Wheeler is awesome. Because of your videos I got my 98 banshee in the shop right now getting the same motor built
@banshee100
6 жыл бұрын
who building it man
@jesseredie
6 жыл бұрын
Sir you have by far the nicest banshee!! I had a 1997 red an yellow. Mildly built had the crank an beefier top end. But I too left An went to a 4 stroke. Been missing it ever since. Awesome bike!!
@banshee100
6 жыл бұрын
Jesse Edie thanks man
@banshee100
6 жыл бұрын
thanks ,
@patrickbarnes2686
6 жыл бұрын
The stock crank will start to separate, always replace with a welded and trued one
@banshee100
6 жыл бұрын
watch my other video 100hp banshee break down
@MrGolddenboy
4 жыл бұрын
Whatch it thanks for the video. One hell of a quad . Be safe. I love how you were on a wheelie 2 3 4 5 gear and the power band is amazing on that monster.
@droski33
6 жыл бұрын
These vids make me want to buy a banshee again. She's a beast dude.
@Jampony44
6 жыл бұрын
Bro you are my new hero, love the banshee lots of power that's actually the same kit i'm going with 💪🏽💯
@banshee100
6 жыл бұрын
nice man thanks
@Jampony44
6 жыл бұрын
subscribed to your channel, if I have any questions in the future do you mind me asking?
@banshee100
6 жыл бұрын
ask away
@Robboned
6 жыл бұрын
I have a nice '06-model Banshee I bought almost 13 years ago in the fall of '05 & it's still never-fired or fueled either, built by Yamaha;)...if I ever decide to uncover it I will surely build it as you did yours.
@banshee100
6 жыл бұрын
Robboned nice
@MrRingo2111
4 жыл бұрын
Very nice banshee bud. I just picked up a 99 banshee for a pretty good price. I live in Lebanon Oregon and I took mine to redline racing in sweethome Oregon. He's a banshee genius!! Really good dude!
@banshee100
4 жыл бұрын
Yeah he's the guy that did the Pro Mod in my transmission
@MrRingo2111
4 жыл бұрын
@@banshee100 Hell of a guy! He should have mine done this week.
@dustinureyes
6 жыл бұрын
Love built 2 strokes what ever they may be waiting on my 85 atc 250r its getting esr 350pv cylinder 4 mill crank 41mm pwk ...Nice branche btw really clean and love the 6th gear wheelies man 👌
@MrTheHillfolk
6 жыл бұрын
dustin bachmeier 250R Mmmmmm nice , thanks for the memories of those.
@chrisheath284
6 жыл бұрын
I love the bike, I like how Stock it looks. I love the doubters. 300’ dirt drag guys have monster 1800 cc triple cylinder motors. Those are purposely built to do 1 thing, yours looks like a lot of fun. Props on the Pro build + Dyno Tune. The bike should be reliable. Lots of 100 horse bikes, not a lot that arnt stretched, slammed and on the raw edge of going full grenade mode. Check out the “King of the River” guys from Oklahoma. They have some nasty bikes and ride hard.
@banshee100
6 жыл бұрын
Thanks man I've seen the king of river run there fast
@hank1556
6 жыл бұрын
+1 on the stock look! I HATE the billet, chrome everything, lowered and stretched and cut to hell fenders with tiny healights and candy paint. ugh... so ugly and its really popular nerf bars, bark busters, stock stance is about all you need. best look
@horsegirl1866
Жыл бұрын
The fastest, cleanest, coolest, 'shee I've laid eyes on.
@banshee100
Жыл бұрын
You mean me hun??
@chrisfrane973
6 жыл бұрын
Nice bike. I ride mine with my wife and daughter on wi state trails. Gotta keep it stock and quiet. Ugh. But its still fast as a banshee💪😁👍
@paulpz04
6 жыл бұрын
representing Georgia, my man!!...I'm so glad you made this video cause it answered all I wanted to know...I have an '04 now, used to have an '01 I shouldve never got rid of but so far on the new one just vforce4, t5s, wiseco full perf clutch with basket and I just broke the eccentric bolt the other day so I think I might just let the company u mentioned take care of all that for me lol
@michaelpipkin2660
2 жыл бұрын
Absolutely love the sleeper look. 421 is a bad boy.
@banshee100
2 жыл бұрын
yes sir
@shaney3116
6 жыл бұрын
Awesome bike. Bulldawg fan here from Athens !
@ryantaylor6342
6 жыл бұрын
Dude love ure Banshee , but please just tell us what's done to it before I fall asleep
@KanadaVCK
6 жыл бұрын
rude
@justinm6110
6 жыл бұрын
That bike is sick as hell daam man
@kingdezines
4 жыл бұрын
Cascade Innovations is now Top Dog Racing. They do good work, they've done mine and all my friends Banshees ranging from a 4mill, to 10mill builds.
@banshee100
4 жыл бұрын
What clutch side gear your running and bearing?
@kingdezines
4 жыл бұрын
@@banshee100 I cant even remember what clutch is in mine. It was done in the early 2ks from Cascade. Ill ask my buddy what hes runnin. He just got his 8mill rebuilt with the override trans.
@bdogjr7779
5 жыл бұрын
Awesome H《☆》Good choice by having a shop build it. They know what it takes to make reliable power. The red clay hills of Georgia look as good as I remember 🤠☻🤠
@bzly904grizzlymood7
6 жыл бұрын
Dude Cascade Innovation ROCKS'! That is A mean MF'en machine! I have that set up minus the pipes & Trans, but now that you suggested Redline that'll be my next step. Thanks and Keep killing that #SHEEETHANG
@banshee100
6 жыл бұрын
thanks man
@BTR2018
5 жыл бұрын
Love the video, can’t imagine how fast she is:) I’m trying to build a banshee on my channel and can’t decide which route to go? Should I bore stock cylinder cuz there scarred and port and polish them?, or should I go with a kit off of eBay? Money is not the problem I just don’t want to build a drag quad, and nothing to crazy. I wonder how those aftermarket cylinders are?
@banshee100
5 жыл бұрын
Fix your stock cylinders
@BTR2018
5 жыл бұрын
hellcat channel: should I port and polish them? What kind of pistons should I use? Wiseco?
@banshee100
5 жыл бұрын
Yes wisco
@banshee100
5 жыл бұрын
Just fix them and ride
@BTR2018
5 жыл бұрын
Awesome I’ll probably do that.
@dannyprater7687
4 жыл бұрын
VP banner is bad ass! Your bike is just ungodly!
@raymccormick6285
6 жыл бұрын
Should always let us hear it sing a tone in every video... Subbed!
@johnreynolds6291
4 жыл бұрын
Cleanest Banshee I've Ever Seen Period.
@banshee100
4 жыл бұрын
Thanks john
@fuckgoogle8797
6 жыл бұрын
NOT ot be getting into your personal business, but how much did that engine work/parts end up causting you?
@modsquad8817
6 жыл бұрын
Hell yeah man. Maybe one day will meet and you can meet the banshee killers lol. She’s beautiful. I built both my drag toys. One has been on a Dino. Esr done the ports on both tho.
@250R4life
6 жыл бұрын
Mod Squad that banshee will eat that R
@250R4life
6 жыл бұрын
Mod Squad what size engine
@banshee100
6 жыл бұрын
250r are nice had one and I. Called ct racing and he said the badest I can build is 75 whp
@banshee100
6 жыл бұрын
So I went with a banshee more power
@250R4life
6 жыл бұрын
hellcat channel well idk about that one I’m a R person only reason I said that too him because who he said ported his engine but you would be very surprise what a trx431 puma kit from LED performance will do😁
@sammyboswelldirtybrc7580
6 жыл бұрын
that thang is a beast I ride a banshee myself have owned mine since 99 bought it brand new off the show room floor love it would love to put the same build u have on yours on mine it's a sweet bike man
@Profabdesigns
6 жыл бұрын
Can you pls tell us all, what the final bore and stroke was, and the total cc displacement is now? Do you have the compression ratio also? Forgive me if I missed it the first time. I just got the motor out of mine, and it’s headed to Redline in 2 weeks. Thx brother.
@elimartin5105
5 жыл бұрын
2 strokes dont do a compression ratio and it doesnt matter bore doesnt matter none of that matters, it all in the port work that its had done\, that what really make a a fast banshee
@banshee100
5 жыл бұрын
Get it done??
@evanwilliams2602
6 жыл бұрын
Love your videos.wish to see some of your drag racing
@5dsunny713
3 ай бұрын
I need this in a cross kart . We need more builds for ppl who can’t ride quads Cuz of disabilities
@bhdunphy
5 жыл бұрын
Awesome banshee, what gear ratio are you using, and what needle did you say was in it? I have a 421 serval that makes 90 hp and doesn't pull the wheels like this one, the powerband just feels like a light switch and spins the tires
@banshee100
5 жыл бұрын
Cel needle how does yours do on the pavement
@banshee100
5 жыл бұрын
Also 15 40 sometimes stock gearing
@bhdunphy
5 жыл бұрын
It still spins on pavement, I'm running a cel needle and 15-40 gearing as well. Only difference is I have 38mm carbs
@stevewombles7567
4 жыл бұрын
Guys where can I get a good set of glow plugs an a flux capacitor for a banshee
@kevinAuman1
6 жыл бұрын
Man, I thought my .30 over bolt on quadzilla was nasty (which it used to run like this but shes due a rebuild) that's a little handful of fun looks like haha stay safe brother!
@MrTheHillfolk
6 жыл бұрын
kevin auman My buddy had one of those back in the day. What a beast!! His was a little knackered because something was up with the governor assembly or whatever the hell that thing is that operates the power valve. So it was a gamble if it would work or not when ya needed it. When it wanted to work, whooo hoooo hang on!!
@kennethkrajewski9443
6 жыл бұрын
quadzilla is the nastiest of all. beat so many quads! loved mine and I think I need to try this 100 hp beast out. seems like there's 200 more engine builders for the banshee in the country
@dalebennett1042
6 жыл бұрын
If ya don't mind what was the total cost for the engine?
@michaelviens2894
6 жыл бұрын
Banshee brothers you got 50 hp on me
@STILLNIGHTPEARL
6 жыл бұрын
I have just about the same setup except I’m running 39mm pwks on race gas and a +8 swingarm which I recommend all day. Can’t go wrong with a 4mm cub, best bang for your buck.
@banshee100
6 жыл бұрын
Alfred Hernandez yes it is man
@hookedoncatchin
6 жыл бұрын
I love Banshees, but i ride an 08 KFX 450R with 36t rear end, fuel management and regulating system removed and tuned, she's supposed to top out at 105 mph generously
@hookedoncatchin
6 жыл бұрын
I also happen to live a few hours from Boring, I live in the valley by Corvallis
@mike300406
6 жыл бұрын
LUV them 2 stroke twin yamaha's 350 cc or 250 cc both great engine's
@roguepowersports3576
5 жыл бұрын
Damnit man I really like your shee. I've been looking for one to restore/build for a long time. Cant find anything around me that people dont want WAY too much money for that aren't already fooled with. I want to do one the way I want it not redo something someone bolted crap to thinking it's worth more than it is.
@banshee100
5 жыл бұрын
Yeah cracks me up and pickles got stock banshees in the ask 5000-6000 for that's just retarded
@roguepowersports3576
5 жыл бұрын
@@banshee100 yeah bro no kidding it's insane. I'm in NJ and seems like the prices here are outrageous plus nowhere to ride without getting locked up but building my banshee (when I can find one) is on my list of need to do's.
@banshee100
5 жыл бұрын
Sweet man good luck at it bro
@Mac181
Жыл бұрын
I’d make sure to have some real sticky grips that thing must want to throw ya off every gear
@jessehall7654
6 жыл бұрын
Good job on this video ...we love banshees
@banshee100
6 жыл бұрын
Jesse Hall thanks buddy appreciate the comment
@damonquebeans
5 жыл бұрын
I'f you don't mind me asking how much total did your build cost
@shaneashford3889
4 жыл бұрын
He said 3k on the motor on another post
@th6ux
6 жыл бұрын
i’m looking to get a 4 wheeler roughly $1000 and under. got any good recommendations?
@wallaceeatman1781
6 жыл бұрын
That bike fast I had one the same model I sold it and got a 1000 paloris
@Tylercolalife
9 ай бұрын
The downfall of a 421 cub is that it's a topend motor. In tight trails, it would be a dog, I have a stock cylinder, a 4mill short rod, and wouldn't have anything else
@johncardoza2652
5 жыл бұрын
Yea that is a nice build for sure u have a bad ass bike but i was just wondering is there any 421 kits that u can run on pump gas
@banshee100
5 жыл бұрын
Yes blue bike is a 421 serval pump gas
@bernardfournier4610
6 жыл бұрын
I know what mine was and I had a Full drag port with a Tentmill cub and I was 138 Out of frame big bore sheer drag pipes
@banshee100
6 жыл бұрын
bernard fournier did you see my dyno sheet
@BrendanMX
3 жыл бұрын
What kind of gas do they specify that you run? C-12?
@banshee100
3 жыл бұрын
Sunoco 110
@stsdoe820
5 жыл бұрын
Cool I got the same setup as your bike except I got to stock transmission and I got cpi's button trying to pop wheelies in 4th gear everything else ported engine ported because Brandon Wiseco 68 I'm just trying to pull wheelies in 4th gear
@banshee100
5 жыл бұрын
news for me and you both mines not reliable man hit started missing on a cylinder yesterday when it was cold so it's down at the moment
@viccarruthers3427
5 жыл бұрын
Dude ur banshee is SICK... All 2gether what do u think u got into it?
@banshee100
5 жыл бұрын
7000
@pktillidie
6 жыл бұрын
Where did you get your quad dyno’d? I’m in north Alabama and can’t find anybody local to do it.
@banshee100
6 жыл бұрын
Rockale Lyons it's not local it's called Currie motorsports n.c
@jeromehoward2783
6 жыл бұрын
Great bike bubba im subscribing now keep it up
@stsdoe820
6 жыл бұрын
Hey I was wondering what size domes are you running in that cool head
@banshee100
6 жыл бұрын
sts Doe 20cc
@danielbell5487
6 жыл бұрын
Respect from UK
@DjChrisChip
5 жыл бұрын
Why did you say you wish you never got the 4 stroke quad? Which one did you get?
@banshee100
5 жыл бұрын
Yes 450 they blow up all the time
@DjChrisChip
5 жыл бұрын
@@banshee100 thanks for the answer back. I am deciding on my first quad between banshee and yfz450 for simple trail riding and occasional track use.
@banshee100
5 жыл бұрын
Yfz for track only
@DjChrisChip
5 жыл бұрын
@@banshee100 thanks love your content. Reach out to michael sabo on KZitem. He is doing a trail build banshee with a 421. Think you could help him. He is from philly.
@ericmacnichol3791
4 жыл бұрын
Love your banshee, its awsome...
@banshee100
4 жыл бұрын
Thanks brother
@ericmacnichol3791
4 жыл бұрын
@@banshee100 no problem.
@Nunya_Beezwax
6 жыл бұрын
You wanna make that banshee run,.. Call Shawn Nielsen of Moka Mods
@banshee100
6 жыл бұрын
He dyno tuned it lol
@banshee100
6 жыл бұрын
They said stringest cast cub they seen
@Nunya_Beezwax
6 жыл бұрын
Shawn is the man when it comes to banshee's 💯
@jasonneal
6 жыл бұрын
Have you ever dealt with the single carb set up? I have completely built my banshee for moto cross and heard single is the way to go
@banshee100
6 жыл бұрын
jasonneal no sir single is not the way to go it completely com the powerband down I do not like it at all
@stsdoe820
5 жыл бұрын
Was the exact size of the domes in your bike Hellcat
@banshee100
5 жыл бұрын
20cc
@MrATOMBOMB420
4 жыл бұрын
Full pro circuit exhaust vforce 3 Reeds ported polished + 4 mm hot rods crank trued and welded with 115 mmmm rods special Vito's Banshee big bore Pistons 22 cc cool head 4 degrees advancedLonestar racing + 4 swingarm Alba + 2 steering stem Alba plus-2 1 A-Arms with predator suspension all way around triple core radiator was going to run pwk38 carbs but I think they may be just a touch too big as pwk35 seem to be the number 38 seem to lose some of your bottom end I did all the billet impeller aftermarket pancake clutch pusher Heavy duty clutch did case matching with the porting
@banshee100
4 жыл бұрын
Sounds like a good ride man
@MrATOMBOMB420
4 жыл бұрын
@@banshee100 any tips or things i can do to make it absolutely bulletproof reliableI'm ordering all the parts so that it's not just oh I broke this part replace this that's not working right replace that I'm looking for any pointers I've looked on Banshee HQ all tips and pointers to build a good banshee and your bike is just straight awesomehowever I think I might upgrade that stock swingarm that you got but I understand the sleeper approachsomeone pulls up since they got something that's absolutely the fastest thing on planet Earth thinking that the person they're racing has a pretty much stock machine and then all of a sudden they get ate for breakfast
@MrATOMBOMB420
4 жыл бұрын
@@banshee100 better to get all the parts together build it all right the first time
@banshee100
4 жыл бұрын
@@MrATOMBOMB420 just talk to your builder they will know
@MrATOMBOMB420
4 жыл бұрын
@@banshee100 i am my builder I've been building motors for almost 30 years but I've never gotten into a Banshee motor
@AutoRolo
6 жыл бұрын
Dam things a horse great bike I’m working on mins right now getting ready to slam a cheetah cub in it can’t wait to ride it
@banshee100
6 жыл бұрын
Auto Rolo there dun man
@tonysmith5240
6 жыл бұрын
It’s still Cascade I live in Oregon it’s Cascade Innovations and Top Dog raving is there too and there’s also Redline Racing
@banshee100
6 жыл бұрын
Tony Smith good to know man decline did the trans
@tonysmith5240
6 жыл бұрын
hellcat channel yeah there both good companies my uncle had an 01 banshee that Cascade did a 4mil to, and this last Saturday I was parked next to one of the Redline guys at Winchester cause my banshee wasn’t running right so he helped me out the best he could but it just didn’t wanna fire. Cascade has been more than happy to help me if I call with a question unlike some places won’t answer they’ll just tell you bring it in and charge you.
@banshee100
6 жыл бұрын
mine had the same issue andit was that stupid riĉky stator they used
@tonysmith5240
6 жыл бұрын
hellcat channel I just redid all the electrical did CDI Stator ignition coil and fly wheel that’s why I had it out to test it but pretty sure it’s the carbs getting too much fuel they’re worn out so just gonna do the single carb kit less to work on and I use the lower end it’ll give me for climbing anyways
@chrisfrane973
6 жыл бұрын
I wish. I live up here in the cold and shit wet mud. Still cold as shit here. Ugh. Dying to ride. I just got mine in march. It was in bad shape. I fixed it up oem per the wife lol. I do what i am allowed😁 a happy wife is a good life😁
@banshee100
6 жыл бұрын
Chris Frane all it does is rain latley
@adamharrington8814
6 жыл бұрын
how is the crankshaft holding up?
@banshee100
6 жыл бұрын
good
@illnameitlater1660
6 жыл бұрын
great build whats the top speed do you know
@banshee100
6 жыл бұрын
not sure
@illnameitlater1660
6 жыл бұрын
CryinBranston don't mean to sound like a dick but no shit dude it don't matter how its geared it has a top speed
@hank1556
6 жыл бұрын
probably like 200 mph
@MrATOMBOMB420
4 жыл бұрын
Did you do the TZ and Max load bearing upgrade
@banshee100
4 жыл бұрын
Tz only
@shaneashford3889
4 жыл бұрын
Do they offer the cub kit for the blaster platform?
@banshee100
4 жыл бұрын
No
@shaneashford3889
4 жыл бұрын
@@banshee100 well that sucks.you figure they would ,I mean the blaster is like the younger annoying little brother of the banshee. I just blew the top end on mine and wanna up the hp some. I'll
@rukus13
6 жыл бұрын
Not to be nosy, but can you give a rounded number on the price of motor work done and the total price of everything including bike price (rounded of course). Meaning if you did sell the bike what would be the asking price. Ballpark. Not that I’m poor or anything, but not rich either lol.
@banshee100
6 жыл бұрын
6500.00
@banshee100
6 жыл бұрын
I may send me your number email to srt-4matt@hotmail.com
@zachklippa3464
5 жыл бұрын
Is this build still accurate today? Nothing major changed?
@banshee100
5 жыл бұрын
Same
@MoparCrazy803
5 жыл бұрын
You should of told the price. I bet half the people asking questions would go silent lol
@shaneashford3889
4 жыл бұрын
He said 3k on another post
@banshee100
4 жыл бұрын
Yea for motor
@HotRodHabits
6 жыл бұрын
Build a blaster I want to see what you could do to one of those
@cannabiscarpenter61
6 жыл бұрын
What pipes are you running? Looking to get a new set of pipes
@banshee100
6 жыл бұрын
Shear drag pipes
@cannabiscarpenter61
6 жыл бұрын
Inframe?
@banshee100
6 жыл бұрын
Yes sir
@easttnlawncare6740
5 жыл бұрын
It will run thats four sure
@trailboss695
5 жыл бұрын
What kind of exhaust you got
@banshee100
5 жыл бұрын
Shears
@fast2valve559
6 жыл бұрын
mines the exact build except i didnt opt for the 4mil crank. mines a 392 cub and its pretty nasty itself
@banshee100
6 жыл бұрын
FAST2VALVE nice
@shawnjerome8599
6 жыл бұрын
Can you tell me a good kit for a pump gas kit
@banshee100
6 жыл бұрын
4 mill serval as cast
@BackRoadGarage
4 жыл бұрын
Shearer silencers? they kinda look like toomeys
@banshee100
4 жыл бұрын
Shear pipes and silencers
@Jampony44
3 жыл бұрын
What intakes did you go with
@banshee100
3 жыл бұрын
pod filters
@Jampony44
3 жыл бұрын
@@banshee100 I was talking about the intake manifolds, did you do the regular intake manifolds or the intake manifolds with the crossover tube
@banshee100
3 жыл бұрын
@@Jampony44 upp
@Jampony44
3 жыл бұрын
@@banshee100 OK thanks bro I was hoping you was gone say billet intakes with the rubber boots lol
@74superglide
6 жыл бұрын
Did you say about $6,000??
@kendoyle9373
6 жыл бұрын
Dude ... you you need more banshee videos... Fucking rip that thing up...lol.., Bike is awesome ... I called cascade she got back to me with a price ... kept the videos coming... jump in the Hellcat. And do some donuts....
@banshee100
6 жыл бұрын
BANSHEE CHANNEL!!!!! !!!!! Man I'm trying but it's raining so much here my driveway is 5 in deep in mud so I can't get the Hellcat out and the pastor is just a solid piece of mud
@realstakes101
5 жыл бұрын
Around what the build cost?
@banshee100
5 жыл бұрын
4500
@5dsunny713
4 жыл бұрын
I want this setup on a mini buggy ... help me out with specs ... maybe a little less..maybe 80hp serval for torque .. I watched this 3xs
@5dsunny713
4 жыл бұрын
I can’t bend my leg like that .. so I rather a mini buggy/modified cart ... someone leave comments I absolutely love this bike and the rider .. the 4th year power wheelies are so epic ... just need a little more torque so a serval is more my speed 20hp makes a big difference... but it’s gonna haul ass with way .. please bro help out
@banshee100
4 жыл бұрын
You need a 421 serval
@catlincarrell165
5 жыл бұрын
Nice shee Sir.
@banshee100
5 жыл бұрын
Thanks
@trailboss695
5 жыл бұрын
What kind of gas you running in it
@banshee100
5 жыл бұрын
Sunoco 110
@bernardfournier4610
6 жыл бұрын
Not sayin yours don’t run good Mine was on full Methanol 40 mill carbs Two through five override with a lock up
@TheNattyking
3 жыл бұрын
I wanna here prices man !!
@BaldVulture87
6 жыл бұрын
what a beast of a machine, why the fuck did 10 ppl disliked this? they salty and jelly, that's why.
@banshee100
6 жыл бұрын
Bald Vulture your correct
@spencerkipp7123
6 жыл бұрын
so with everything done how many cc's is it???
@banshee100
6 жыл бұрын
421
@showtyme843
6 жыл бұрын
Hell Cat do you think you could get the same hp out of a yfz450?
@banshee100
6 жыл бұрын
Show Tyme no sir
@showtyme843
6 жыл бұрын
Thanks for reply. I was just wondering because those was always my next choice after the banshee.
@hank1556
6 жыл бұрын
@@showtyme843 I knew a guy who managed to get 90hp out of a CRF450 engine. bored, stroked, built everything, cost a fortune. it didnt last long at all.. too much heat and stress on 4 stroke engines
@michaellinkous7449
2 жыл бұрын
Im looking for a transmission if you know of any
@joegaskill8742
6 жыл бұрын
Bad Ass,,subscribed!
@joegaskill8742
6 жыл бұрын
Have you considered longer A arms and a wider axle? A friend of mine had one that was plus 2 inches I believe and although it was tight on some trails it made it so much better.
@banshee100
6 жыл бұрын
Yes I have but I'm happy with it for now
@antwineprichard3943
6 жыл бұрын
that's a nice build
@jasonn277
5 жыл бұрын
What’s the top speed on it?
@banshee100
5 жыл бұрын
not sure
@1jznoshit146
5 жыл бұрын
Jason Ferguson too fast 🤣
@countryshenanigans-nn3pb
6 жыл бұрын
Could you email me the pics of the build sheet so I can build me
@banshee100
6 жыл бұрын
Check my other video hundred horsepower breakdown
@mike300406
6 жыл бұрын
Stock rz 350 has I believe 38 hp the banshee is detuned retuned whatever gotta be close to that you would think
@dr.hugog.hackenbush9443
5 жыл бұрын
Stock RZ is closer to 50. Also has powervalves. Good pipes get it over 50, and a lot lighter.
@dennisswint99
6 жыл бұрын
You from Tennessee?
@realtalk4937
3 жыл бұрын
What’s the exhaust
@banshee100
3 жыл бұрын
shears inframes
@realtalk4937
3 жыл бұрын
@@banshee100 so shears over Cpi’s?
@banshee100
3 жыл бұрын
yea
@Fox250R
6 жыл бұрын
Do you have paddles ?
@banshee100
6 жыл бұрын
No sir
@Fox250R
6 жыл бұрын
hellcat channel You have to get that bad boy in the sand at least once. Come up to Oregon I’ll show you some good spots :)
Пікірлер