Your video is so clear and informative. Clear fluent english thumbs up to the camera guy and camera. So helpful thank you very much.
@EPIperformance
4 жыл бұрын
Thanks Jay! We sure aren't Hollywood lol but we do our best to help people out.
@jamesscherck6155
6 жыл бұрын
Why didn't you put the new kit in?
@EPIperformance
6 жыл бұрын
Hello. We mainly do the videos inbetween our test runs. Sometimes it depends on the test schedule and if we have the production or prototype parts. The main goal is to show people how to service the clutches. Also sometimes we don't want our trade secrets out in the open for all of our competitors.
@tkalmi09
7 жыл бұрын
how do u hold the secondary clutch from spinning to torque it
@EPIperformance
7 жыл бұрын
You can try holding it by hand but the easiest way I found it to stick a larger screwdriver in slot of the clutch, you have to be careful not to damage the plastic slider. If you open up the clutch like you are changing the belt the screwdriver will go into the clutch farther and which will also make it easier to keep the clutch from rotating. I hope that helps, let us know if you have any other questions.
@judydoiron8943
7 жыл бұрын
TK ,
@ROTAXD
6 жыл бұрын
TK put the unit in gear, have sombody step on the brake and hit it with an impact wrench. Been removing them since the 70's with snowmobiles.
@blackmetalchevy
5 жыл бұрын
Will the puller from the rzr 800 work?
@EPIperformance
5 жыл бұрын
No it wont. It has the same threads but its to short and can damage the cover bushing if used. PCP-8 is the correct puller for the General.
Пікірлер: 12