By far the most instructional video on how to rewind a motor for use with a battery. This Is a great video!
@gear_show
3 жыл бұрын
Again, thank you so much!
@frk380
3 жыл бұрын
I was disappointed when armature was short to body. Because it takes lots of time to rewind. Appreciate your hard work 👍.
@featofficial1280
3 жыл бұрын
o
@gear_show
3 жыл бұрын
Yes, I scratched out the internal isolation of the armature, while I was removing the old oil.
@gayle525
3 жыл бұрын
I like that the battery weight is on top where it might even help with better planing. More balanced that the back of batteries. Sweet job.
@gear_show
3 жыл бұрын
Yes, I'm glad you think like me. Thank you!
@zik316
3 жыл бұрын
I love these converting AC to DC power tool projects. Nothing else like it on youtube.
@gear_show
3 жыл бұрын
I'm glad you like them!
@nicub.1595
3 жыл бұрын
Great great job. Nice work 👍👍👍
@gear_show
3 жыл бұрын
Thank you!
@baongocvoho9591
3 жыл бұрын
Rất thích xem video của bạn.
@gear_show
3 жыл бұрын
Tôi rất vui vì bạn yêu thích tác phẩm của tôi.
@vedantkaothekar8089
3 жыл бұрын
Brilliant sir you are my idol
@gear_show
3 жыл бұрын
Wow, I'm so happy to hear that, thank you!
@حسين-ج9ط7ي
3 жыл бұрын
thank you teacher
@nogocux
3 жыл бұрын
Nice, rebuild, well done.
@gear_show
3 жыл бұрын
Glad you enjoyed it, thank you!
@luisignaciocastillo7261
Жыл бұрын
EXCELLENT and USEFUL video. Thanks for sharing your knowledge with us.
@gear_show
Жыл бұрын
Glad it was helpful!
@Andrew-dm8mk
3 жыл бұрын
Thank you for the upload 👍🔥👈
@gear_show
3 жыл бұрын
My pleasure, I'm glad you like it.
@justarideout
3 жыл бұрын
Top Man Excellent result
@gear_show
3 жыл бұрын
Thank you!
@stevestruthers6180
3 жыл бұрын
Nice work. You literally hacked an AC-powered planer and adapted it to become cordless.
@pauls826
3 жыл бұрын
What gave you that idea very observant aren’t you
@jaedonkanyid3775
3 жыл бұрын
This man cuts no corners! Amazing work!
@gear_show
3 жыл бұрын
Thank you!
@repair_and_restoration
3 жыл бұрын
Chế cũng hay nhưng khe hở từ giữa rô to và nam châm khá lớn làm giảm công xuất của mô tơ.
@phuocthola692
3 жыл бұрын
Kb đi
@outstanding1448
2 жыл бұрын
I could watch this all day long, well, some tools restorations, anyway.
@marklimbrick
3 жыл бұрын
Great to see you did this and it worked - when I tried the green or grey ceramic/epoxy on most motor winds is impossible to cut through - needs an angle grinder. Plus get the magnets sorted first! And then the current is ten times what it was designed for on the commutator bars and brushes. High current DC motors use rare earth sintered block brushes. High voltage low current usually carbon.
@rankedoperator8915
3 жыл бұрын
wooho i think you have a new broadband coz you are answering all our ques😁😁😁😁😁😁😁😁
@MYs0708
3 жыл бұрын
You always make something to amazing
@gear_show
3 жыл бұрын
I'm glad you like it.
@TIMUR-ASKET
2 жыл бұрын
19:35 crying like a child😂😂😂👍👍👍
@dahlesa
3 жыл бұрын
Damn, when you had to start all over again with that armature....that sucked.
@gear_show
3 жыл бұрын
It is my mistake that I don't use insulation plastic.
@markushykus
3 жыл бұрын
Great job
@gear_show
3 жыл бұрын
Thank you!
@user-ng8zs8op8m
3 жыл бұрын
👌👌👌
@tufanyldzhan9365
2 жыл бұрын
wow perfect transformation
@hoanghuynh4124
3 жыл бұрын
👍👍👍
@gear_show
3 жыл бұрын
Thanks!
@ryanwood6495
3 жыл бұрын
Awesome video love this channel ❤
@troyna77
3 жыл бұрын
This is the one person you want to be with during a zombie apocalypse!
@gear_show
3 жыл бұрын
Haha, don't forget contact me that time :D
@abdulwahid8579
Жыл бұрын
Great job 👍
@alpeshpardhi9572
3 жыл бұрын
1 million subscribers bro
@gear_show
3 жыл бұрын
I hope so, thank you bro :)
@FerSniper
3 жыл бұрын
Спасибо за видео!!!
@gear_show
3 жыл бұрын
Не за что!
@Hang_bai_Can_Tho_65
3 жыл бұрын
Vua độ 👍
@thomastechnical2075
3 жыл бұрын
Verry Good
@gear_show
3 жыл бұрын
Thank you! Cheers!
@tauheedansari1177
3 жыл бұрын
As good as always
@gear_show
3 жыл бұрын
Thanks again!
@BaulMp3
3 жыл бұрын
Excelent bro, useful vídeo.
@gear_show
3 жыл бұрын
Thank you!
@myrestorations
3 жыл бұрын
Great 🤝
@abdulnasir2802
3 жыл бұрын
Good job
@gear_show
3 жыл бұрын
Thank you!
@antoha3611
3 жыл бұрын
19:35 my cat at 3am
@gear_show
3 жыл бұрын
Haha,…
@alexandres8846
3 жыл бұрын
good job for higher motor power use neodymium magnets.
@gear_show
3 жыл бұрын
Okay, thank you for the tips! I will try it next time.
@lopa2000
2 жыл бұрын
great job🙂
@gear_show
2 жыл бұрын
Thanks
@acdcjavier22
3 жыл бұрын
How do you know the turns for rewind 18v motor?
@gear_show
3 жыл бұрын
I study from original DC armature 12V, 18V, 24V and 36V.
@mraksnajper8683
3 жыл бұрын
Good afternoon! Does the battery not have protection against deep discharge? Need to monitor your battery? Thank you!
@davidcox2264
3 жыл бұрын
Very cool
@restorationconstantines7731
3 жыл бұрын
Great idea!👍
@황외수-l2b
3 жыл бұрын
당신 진짜 대단해요👏👏👏👏👏
@gear_show
3 жыл бұрын
매우 감사합니다!
@Kamidashi77
3 жыл бұрын
Beautiful! 😊
@pedromartins280
3 жыл бұрын
Where can I find this battery and adapter?
@gear_show
3 жыл бұрын
You can find it from online shop.
@germancolina4937
3 жыл бұрын
@@gear_show please share the link!
@pedromartins280
3 жыл бұрын
@@germancolina4937 yeahh, can u shared it?
@isun_pribadi2043
3 жыл бұрын
😉👍
@gear_show
3 жыл бұрын
Thanks
@viswanathanramakrishnan7613
3 жыл бұрын
Great. I can't imagine that I will be able convert the drill which was gifted to me by my relative and is idle since it can be Operated in 110v ac.
@jahladallamusic9984
3 жыл бұрын
Brilliant
@dzungtran5316
3 жыл бұрын
I think it needs more s of Li-ion battery. Maybe 6-8s
@gear_show
3 жыл бұрын
Yes, for more power. I think it is usable now.
@LuisRubioGarcia
3 жыл бұрын
Could you explain the basics of rewiring in a video. Why 5 stacks? Why 10 turns? Does the diameter of the wire affects? Thanks
@acdcjavier22
3 жыл бұрын
The wire diameters affects for the wattage functionally, more diameters cable supports more current and of course more power, but it this implies more heating motor
@gear_show
3 жыл бұрын
The armature structure 12 stacks, We need to wrap coil wire cover 5 stacks. 10 turns is maximum turns with the coil diameter. Yes, @acdcjavier22 explains about the wire diameter.
@screw_and_paint
3 жыл бұрын
Мне одному кажется, что это делается проще? Берется подходящий мотор, режется втулка якоря нужного вылета, сверлится в ней отверстие, подходящего диаметра под втулку движка и напресовывается?
@Konstantin557
3 жыл бұрын
Вопрос вообще в другом, зачем, для чего?
@dontabakers1515
3 жыл бұрын
ещё проще купить сам рубанок. почему у меня возникает желание отправить доку на измерение прибором.
@Konstantin557
3 жыл бұрын
@@dontabakers1515 Не, этот чувак делает не плохо. Он просто любит всё аккумуляторное. Но идея у тебя норм. Тоже дока посматриваю👍😉
@Crafter_H
3 жыл бұрын
What is the wood and plastic for in the coil winding?
@gear_show
3 жыл бұрын
It is bamboo sticks and book cover plastic
@boby56bbb
3 жыл бұрын
Can you try to rewind the field magnet to low voltage and use it with the modified armature instead of permanent magnet. 😌
@РусланЗагиров-ж4х
3 жыл бұрын
Beauytiful👍
@gear_show
3 жыл бұрын
Thank you! Cheers!
@dzungtran5316
3 жыл бұрын
14:52 so it's power is 61W, and only reach 20% of the original power (320W).
@gear_show
3 жыл бұрын
The power will be increase while loading.
@American_Jeeper
3 жыл бұрын
Gear Showsan, is it resin that coats the armature windings? If so, why? Thermal barrier? When you re-windi them, does not having that coating affect the life of the armature? You do great work.
@gear_show
3 жыл бұрын
Yes, it is resin. There is nothing effect the life of the armature. Thank you!
@longhuang5613
3 жыл бұрын
Amazing work!!!!!!Love it!!!BTW, if you try not to remove the USB? You can also add various 5V auxiliary gadgets, such as laser, lighting, etc.: D,Because his position and angle are very good~~
3 жыл бұрын
Để râu dài thế bồ
@gear_show
3 жыл бұрын
Có, nhưng khó ăn một cái gì đó.
@Kastoraki
3 жыл бұрын
20:15 baby cry....
@gear_show
3 жыл бұрын
Yes, it is :D
@CBGarage
3 жыл бұрын
Is it possible to use high rpm 775 motor instead of rewinding.
@acdcjavier22
3 жыл бұрын
Depends of the watts supports,
@gear_show
3 жыл бұрын
I have a high rpm 775 motor, but the power isn't enough for this project.
@CBGarage
3 жыл бұрын
@@gear_show Ok sir thank you
@devilholker1780
2 жыл бұрын
I want to convert my power tools to cordless, but I don't know what brand of battery to buy, can you help me by telling me what brand you use?
@E-hab
3 жыл бұрын
How about making videos in the opposite direction; battery to AC?
@gear_show
3 жыл бұрын
Yes sir, it sounds interesting, I will think about it. Thank you!
@Mss-sj1fb
3 жыл бұрын
I like your video
@gear_show
3 жыл бұрын
Thank you! I'm glad you like it.
@Abed.alnaser.Alrefai
3 жыл бұрын
Very good work ❤️
@gear_show
3 жыл бұрын
Thanks a lot 😊
@yuanfong7934
3 жыл бұрын
i want learn how to build a acdc adpater like hitachi the 36v corde to cordless adapter
@gear_show
3 жыл бұрын
You can try it.
@jakub0306
3 жыл бұрын
Make somthing with bruschless Engine
@gear_show
3 жыл бұрын
Okay, thank you for the suggestion!
@akrombekmaster8071
3 жыл бұрын
klasss
@JoergDelistat
3 жыл бұрын
I think the better way is to buy a new cordless planer😀
@acdcjavier22
3 жыл бұрын
Cordless machine is more expensive than using a cord machine
@gear_show
3 жыл бұрын
Yes, it depends on your situation.
@meedmeed915
3 жыл бұрын
i'm support you
@gear_show
3 жыл бұрын
Thank you!
@toranosukeijuuinn
3 жыл бұрын
凄い。
@gear_show
3 жыл бұрын
ありがとうございました!
@ibrahimgamal5542
3 жыл бұрын
Can you put website link to the makita bearing puller kit you use? I saw it in one of your old videos. Great job as usual 🌷
@gear_show
3 жыл бұрын
I bought it from local store.
@ibrahimgamal5542
3 жыл бұрын
@@gear_show can you write the part number with a photo, please 🙏?
@rudifleck2911
3 жыл бұрын
converts a tool to 60v like dewalt flex volt
@gear_show
3 жыл бұрын
Oh okay, thanks for the tips.
@rudifleck2911
3 жыл бұрын
@@gear_show I hope you fulfill my fetishes
@andersonbicalhodesouza3588
3 жыл бұрын
Tem que ter muita segurança no que faz, sábio profissional.👍👏
@ogenmiller
3 жыл бұрын
Великолепный проект, отличная работа, прекрасный результат.👍👍 Спасибо за видео. 👍 Я такого еще не видел. Думаю не многие способны повторить эту идею. Я точно не смогу 😂
@gear_show
3 жыл бұрын
Ладно, просто смотри для удовольствия, спасибо!
@AdenGopaul
3 жыл бұрын
What do you do with all the tools you fix because it looks like a lot of them?
@gear_show
3 жыл бұрын
I love electronic tool, I keep them all.
@AdenGopaul
3 жыл бұрын
@@gear_show ok cool lol
@kamaloutillage1849
3 жыл бұрын
What law do you use to convert the diameter of the wire to DC?
@mwint1982
3 жыл бұрын
Murphy's law
@cj8163
3 жыл бұрын
すごいや! 俺なら最初のコイル巻き直し失敗した時点で窓からぶん投げるね
@gear_show
3 жыл бұрын
はい、初めて私にとって同じ気持ちです。
@Tulfonatic-sarcasticsm
3 жыл бұрын
where can i buy thank Hand? Such a gifted.... More power
@TheAnalogKid2
3 жыл бұрын
some things should just be left as is.
@mdsajad075
3 жыл бұрын
Give me link of the battery adapter or battery please. Request.
@dimasina7837
3 жыл бұрын
Постругал и на зарядку...
@bumohamedubualooy7111
3 жыл бұрын
great as usual, I wonder if the torch is too hot to melt the insulation on the windings?
@hungandy8162
3 жыл бұрын
Nài xuống 18v pin 6 7 9ah mới đủ dùng nhỉ
@phamthanhphuc5427
3 жыл бұрын
quan trọng là tua nó có bằng với 220v thôi
@hungandy8162
3 жыл бұрын
@@phamthanhphuc5427 điện zin 100v a b
@phamthanhphuc5427
3 жыл бұрын
@@hungandy8162 à mình không để ý
@hungandy8162
3 жыл бұрын
@@phamthanhphuc5427 bào pin sài cũng ok tui co con ryobi 18v
@phamthanhphuc5427
3 жыл бұрын
@@hungandy8162 em cũng có sài con voto 21v thấy ok lắm
@getyourkicksagain
3 жыл бұрын
Wow, this one sure put up a fight! You didn't give up and the end result is awesome as usual. As always, very well done, sir.
@gear_show
3 жыл бұрын
Yes, very project are different, this one is a bit harder than others. Thanks again!
@moadi_alqahtani
3 жыл бұрын
nice
@gear_show
3 жыл бұрын
Thanks!
@muhammedadil4463
3 жыл бұрын
Sir what is your profession
@BeritaBola2019
3 жыл бұрын
request Circular saw elektrik to cordless with motor dc
@gear_show
3 жыл бұрын
Ok I will try, thank you for the hints.
@ahmednasser-yd1rq
3 жыл бұрын
Where do you get the battery and the future?
@вогневийчувак
3 жыл бұрын
The gap between the armature and the magnet is very large, the engine loses its power by an order of magnitude.
@gear_show
3 жыл бұрын
Yes, you are right. Unfortunately, It can't fit the first magnet.
@trieutulong2310
2 жыл бұрын
1 lần quấn mấy vòng vậy ad
@letrungtan94
3 жыл бұрын
Is only 60W weak?
@gear_show
3 жыл бұрын
Yes, it is.
@alexandrUs1410
3 жыл бұрын
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@samueladitya1729
3 жыл бұрын
Damn. I hate to winding motors or transformers.
@POPRAVIPOKVARENO9596
3 жыл бұрын
8:14 OMG😒 Your nerves are strong as a rope
@gear_show
3 жыл бұрын
Oh really, I'm glad if it likes that :)
@sssserya1
3 жыл бұрын
if you just glue neodymium magnets onto the desired metal tube ?
@gear_show
3 жыл бұрын
Yes, it will be more power than this, but that time I don't have it.
Пікірлер: 309