Those aren't issues, but features! The focus of VZ is flexibility and you have just removed a lot of it.
@FirdausSharil
4 жыл бұрын
Put the batteries and its solved. Used to race using this chasiss and got no issue 😉
@hobbyclubofficial
4 жыл бұрын
Thank you so Much, very helpful video, btw for the rear motor support is it strong enought just to put the standard FRP, not the carbon one.
@clintnieves
2 жыл бұрын
I had the same disappointment thinking the VS and VZ would take the same upgrades on the same screw points. The only consolation is I like the GR Yaris
@SuperJsToysChannel
4 жыл бұрын
Thanks for sharing, Roy. I'm so suprised that Tamiya released a new chassis with those problems in year 2020. By the way, can the matel motor cooler for super 2 to be used on VZ in order to fix the position of the motor? Thanks.
@arenamini4wdclub968
4 жыл бұрын
Big J Mini 4wd I don’t think it’s gonna fit
@t0bit
7 ай бұрын
the number 1 problem of VZ is the fragility of the sidestay
@jiwapembrontak
4 жыл бұрын
Batteries solve the problem
@tamiyago8125
3 жыл бұрын
Thanks for solution
@samnacino599
4 жыл бұрын
Awesome idea. Have to find a way for tuned class since no cutting allowed of carbon in tuned
@arenamini4wdclub968
4 жыл бұрын
Sam Nacino I will try to think about any way can make it works on tune class
@Exaflare23
2 жыл бұрын
Hard to say if its really a problem or not unless you showed a video where the alleged problem occurs while running right? but if the car runs smoothly then there's no problem in the first place.
@titotitowik
4 жыл бұрын
Hi Roy. Have you tried to use the regular motor cover if it will lock in the motor from moving?
@arenamini4wdclub968
4 жыл бұрын
I have try that in the video
@VM001
4 жыл бұрын
Without those supports you added, is it noisy when you turn it on?
@mini4dailytech982
2 жыл бұрын
The multi roller stay trick does not apply for basic tuned. Any ideas for that class? Ty
@arenamini4wdclub968
2 жыл бұрын
Then just use the that plastic motor support come with the kit. That works fine
@mini4dailytech982
2 жыл бұрын
@@arenamini4wdclub968 OK thanks
@joshuamalajito7576
9 ай бұрын
the screw hole of gear cover is easy to loose
@dillonbuttner2114
4 жыл бұрын
I really hope they do a reinforced version of this to take care of these issues
@arenamini4wdclub968
4 жыл бұрын
Dillon Buttner ya. Ya hope they will know it
@dillonbuttner2114
4 жыл бұрын
@@arenamini4wdclub968 just reinforced parts A pack might be enough 😉
@mini4dailytech982
8 ай бұрын
1 it's illegal in b-max, tuned, box stock and pro stock, 2thr motor and gear catch support interferes withe the rear set up and the car shell, 3the motor won't move after you insert the batteries.
@tamiyago8125
3 жыл бұрын
No plus motor support..please solution.
@arenamini4wdclub968
3 жыл бұрын
Check video 6:45
@teamdsharvey5349
Жыл бұрын
Still same problems from Vs chassis
@KartonFox
7 ай бұрын
I wish i can do that, and not be disqualified..
@fikria1514
3 жыл бұрын
It is better if you use regular frp and cut it
@arenamini4wdclub968
3 жыл бұрын
As long as it works. That’s most important
@23humanfly
4 жыл бұрын
Plis make super fm
@lansangel
4 жыл бұрын
Will the aluminum motor support work for the rear motor and gear cover? www.tamiya.com/english/products/15149/index.htm
@Shutxk0u
3 жыл бұрын
My problem: no replacements
@arenamini4wdclub968
3 жыл бұрын
😨⁉️❓
@Shutxk0u
3 жыл бұрын
@@arenamini4wdclub968 in my country there is no replacements only ma and mz,ths only solution is to buy a new car not a new chassis
@infinixx5535
4 жыл бұрын
To much problm,my solution is tamiya should replaced their R&D division and hired the better one.
@TheIronspike1982
4 жыл бұрын
I will never understand why Tamiya make same errors on all new chassis..
@arenamini4wdclub968
4 жыл бұрын
Cause they like to leave some errors for us to get it correct by ourselves, I think 🤔!!! 🤣👍
@TheIronspike1982
4 жыл бұрын
@@arenamini4wdclub968 got it 🤣, I guess with out issues new Chassis runs too fast.
@lansangel
4 жыл бұрын
Will the aluminum motor support work for the rear motor and gear cover? www.tamiya.com/english/products/15149/index.htm
Пікірлер: 39