While I agree, for many 'off-the-shelf' NAS solutions 10gbe definitely may not give the boost you would anticipate. For ZFS and some BTRFS solutions the caching mechanisms can give you a lot of that performance back. The ultra cheap 2.5gb NIC's definitely hit quite a sweet spot though.
@naveentechs
2 жыл бұрын
this
@StephanieDaugherty
Жыл бұрын
Went the 10Gbit route (via OM4 fiber) for my home network a bit over a year ago, and my provider has since then upgraded speeds to 6Gbit symmetrical, even then, it's really rare to actually see anything near that outside of speed tests.
@shaniqualatoya5012
2 жыл бұрын
Thank you for explaining this so clearly!
@realabzhussain
2 жыл бұрын
👆🏼this
@ctrlaltdel02
Жыл бұрын
Just purchased couple used NIC's and SFP's on ebay, complete setup with fibre got me around 120€ total for a dedicated 10Gb line from PC to NAS. Was running NAS for several years now, last year upgraded NAS hardware, that made it fastest storage in my home. In the meantime games get biger and I got decent amount of free space on NAS. So I decided to move my steam library to NAS too. New SSD for games with needed capacity would be aroun 300€+, getting used server stuff was just plain cheaper than getting new SSD. Plus it would make working with other files nicer too, not just games. Main network in house is still 1Gb as it is more than enought for general internet stuff.
@BeepBeepNurseryRhymes
Жыл бұрын
Awesome video!! Very nicely explained. We produce 3D animation videos for kids. Recently bought an 80TB NAS server (with SSD drives). Our server to switch is connected to 10+10gig (paired 20 gig), and some 20 workstations (with SSD drives) are connected to switch with 1gig network. We are moving to a new and bigger studio where we will add another 10-15 users. Will put Cat6a for sure. We need to buy a new switch too, will it make sense for us to invest in a 48port 10 gig switch and upgrade all our networking to 10gig??
@RaidOwl
Жыл бұрын
If you’re going to have enough users that need 10G then you’ll for sure need to upgrade the switch. I’ll have to show my son some of your vids!
@BeepBeepNurseryRhymes
Жыл бұрын
@@RaidOwl yes, will go for 10 gig switch 👍 hope your son will like our vids 🤓
@bluegirlproductions6303
Жыл бұрын
Great video! I'm currently looking at 10GbE for centralizing my data to a server array; I run a multimedia production studio and all of our data is stored on individual computers, making collaboration extremely difficult. I've been on the fence about if it was the right move to go the 10GbE route, and I think you've just told me exactly what I needed to hear. Thank you!
@ArcangelZero7
Жыл бұрын
Thank you SO MUCH for the sobering video about whether I'd really NEED that kind of bandwidth and speed. I'd like more people in the house to use the server I set up, but it's not there yet. Kinda pissed we get about 200-something Mbits on our main rigs over 5Ghz Wi-Fi when paying ~$155/mo to Cox for Gigablast though, so I wanna wire the house! I'm thinking I'll invest in CAT6 cabling if I'm gonna go fishing cable and putting holes in the wall anyway, so I'll only have to do it once. But I can definitely save a ton of money on proper equipment, knowing that 10Gb/s is mainly for bragging rights these days! I've heard of 2.5Gb equipment being a lot cheaper, so maybe I'll look into that... EDIT: The money I save can go to getting an ECC mobo + RAM for my scrappy Proxmox NAS. Thanks! :D
@chionyenkwu2253
25 күн бұрын
Great vid; I recently upgraded to 10Gb ==> actually realising the theoretical top speeds is not always achievable 🙂🙂
@kittysreview9055
3 жыл бұрын
Excellent content, as always!
@markjones2349
Жыл бұрын
I have looked at 2.5, 5, and 10Gb networking and honestly I don't see myself ever upgrading the Cat5 cable I installed in my house. I just bought my first home server this past year or so which is an HPE MicroServer Gen10 Plus. I'm only running open media vault with like 12 docker containers and a few VMs. I'm basically the only person who ever touches it. After I setup zfs on the 4 HDDs and transferred over all of my ripped movies, music, steam game backups, and personal files the files don't change very much at all. So no matter what speed I upgrade my network to it would largely go unused.
@davidl6354
11 ай бұрын
Just you wait you can now buy gen 3 nvme drives for 150 usd. Thats around 3500~mb/s which theres not that many uses right now. But for me i need it for photo editing because hdds are so slow for random read and write for 45mb raw files when theres 100s of them
@trinhk
Жыл бұрын
This is a fantastic video, thank you. This video definitely deserves more than 500+ likes. So in order to fully utilize the 10Gb network, I would first need to upgrade my main router that can support that. Doesn't everything branch from the router? Thanks!
@RaidOwl
Жыл бұрын
Yeah with 10G your client devices and how they’re connected all need to support 10G. For the most part you’ll use a switch to connect multiple devices. I personally use the Unifi Flex XG with has 4 10G ports.
@DavidDowns61
6 ай бұрын
Dude, it's like I sat down across from you and asked the questions I had, and you answered all of them clearly and succinctly without an alphabet soup of jargon. I can't tell you how helpful this one video was in helping me make some decisions. I'm one guy (photographer/wanna-be video creator) in my house with my wife, and we won't be sharing a networked drive. I recently bought a Synology 1522+ with five 12tb Seagate Ironwolf drives. My primary concern is editing files stored on the NAS, particularly regardless of where I am, as I travel quite a bit. I've watched hours of video on this and still find myself stumbling with all the jargon being thrown around by guys who work in networks for a living, and I really just need a down-to-earth recommendation on how to set this up for MY needs. This video was created almost 3 years ago so I wonder what's changed, if anything, in your recommendations for someone in my position with my needs?
@RaidOwl
6 ай бұрын
Nothing really in terms of speeds has changed. If you’re looking to edit from anywhere then I’d honestly look at setting up Parsec on your home workstation then remote in and edit from there. If that’s not feasible then your network speeds over WAN will def be your bottleneck before your local connection speeds.
@DavidDowns61
6 ай бұрын
@@RaidOwl don’t have a home “workstation”, just my Dell XPS17 I carry around with me. At home it’s plugged into a CalDigit T3 Plus dock station & I use a 4K monitor.. Laptop has i9 cpu, 2 tb ssd hd, 64gb RAM & NVIDIA 3060 GC.
@DavidDowns61
6 ай бұрын
@@RaidOwl Are you suggesting I build a high powered “desktop” workstation & access IT remotely vs accessing the files remotely via the Synology NAS?
@RaidOwl
6 ай бұрын
@@DavidDowns61 Nah I was just curious what your setup was
@intertan
3 жыл бұрын
one thing that will help is a proper home network. A single 24 port switch will be better then a bunch of cheap 5 port dlink switches scattered around the house
@philharris9631
3 жыл бұрын
At home my network is basically split out as an ‘upstairs’ and ‘downstairs’ network so I’m looking at using a pair of D-Link stackable switches that have 2 or 4 SFP+ ports to give me a 10GBe uplink between the upstairs and downstairs switches so that the machines upstairs aren’t bandwidth throttled.
@Shenmue58
2 жыл бұрын
When I started in IT, 10Mb networks were the standard. When 100Mbs came out minds were blown, people of today have no idea . So I laugh when I hear 1Gbs is slow. Sure for comparison to 10Gbs+ it is.... but you have no idea what it was like.
@rudysal1429
2 жыл бұрын
you also didn't have to transfer large files. how big was the data back then when a floppy drive was considered standard when a 4k movie can be over 100GB ... that's like old people complaining about prices but when you look at cost, pay and inflation over time, they had more purchasing power.
@markjones2349
Жыл бұрын
My first experience with networking two computers together was after getting dial up internet and discovering that I could build a parallel cable to transfer files between two machines with no lan built in. It was the coolest thing ever. DOS 6.22 had a built in utility for this. I'm 43 years old and I remember it like it was yesterday.
@adrianner8136
Жыл бұрын
I was thinking of buying a Mac Mini M2 and adding 10 GB for 2 reasons: I plan to keep it for approx. 10 years (my 2013 iMac is still going very strong) and for resale value once I do get rid of it in 10 years or so. I also work from home and access servers at work via MS Remote Desktop and my home internet is 1.5 GB. Thoughts? Thanks!
@exploremarketingllc
Жыл бұрын
“Asking for a friend”…but just got the Asustor Lockerstor 4 Gen 2, 2 Seagate Ironwolf Pro 20TB Enterprise NAS HDD (I need more for RAID 5), the M.2 + Seagate FireCuda 530 4TB Internal Solid State Drive - M.2 PCIe Gen4 for that. Please tell me I’m not wasting money…ha, ha! I edit large videos and projects, sometimes up to 1 TB, but usually around 80-100 GB video project files. I’m looking for access to my video files when out of town, faster processing, backing up and storage. I’m super new to NAS, so now I need to make sure my home internet is fast enough, correct? Also, Om under the impression I plug my NAS directly into my router, or do I need a switch? It has a couple open spots on it for the cable…thanks for the input. Thanks so much and great video!
@magneticshrimp7429
3 жыл бұрын
I completely lost control at some point and am currently at 40Gbps home networking for years now 🤨️ It was a good deal OK!! Seriously though, cant wait for 2.5Gbps to become the new baseline.
@RaidOwl
3 жыл бұрын
This guy building a data center! Haha. Yeah 2.5Gb will be great once it’s the new norm in entry level equipment.
@viktorkalashnikov6643
Жыл бұрын
Great explanation, thank you!
@MannyNCF
2 жыл бұрын
This vid helped explain ALOT. Thank you
@LtGen.Failure
Жыл бұрын
I went the 10G route for my Server since 2.5G looks like to be not well supported by Linux/TrueNAS Scale. The rest of my network is mostly 1G or 2.5G. Only my main PC also runs a 10G card because my Switch has a second 10G port...
@FoodTechLife
2 жыл бұрын
Why do I want 10Gb? Because that’s what future me would want to have. Also I wonder how a different codec would affect editing from a NAS. Something like ProRes or Dnx.
@BalikTrollbane
10 ай бұрын
I am thinking of upgrading to 10gbe for a home network I am setting up. I will be connecting a NAS (5 or 6 drives) to a switch and then to my working pc. I would be sharing the network with one other person. He would be using it as a local media library and I would be using it for Lightroom photo editing and photography backups. I currently only have a 1 gbe network card in my pc and a 1 bg switch. with the usage in my case, would upgrading my gear to 10 gbe be worth it considering there is 2 people, one of which is a photographer? Also, what NAS drives would you recommend and network card? I was thinking of getting a 6 bay synology nas. Thanks for the video man!
@mikelaicarpentier
2 жыл бұрын
Thank you great video and clear info :)
@MG-mb6mj
8 ай бұрын
tnx, this video just save me a lot of money (going for 1gb)
@PropMoneyStacks
2 жыл бұрын
if possible everyone should have at least CAT6A Cable as it should be the new standard.
@markjones2349
Жыл бұрын
Yeah but that's only if your running new cable in a new installation or you plan on upgrading past 1Gb. I'll never upgrade my Cat5 cable in my house. No need.
@benbalzer9716
2 жыл бұрын
Great explanation, thanks! My office has 5 workstations running off 1 server via a switch. So upgrade will work. What do you think about Cat 8 cable? this is available on Amazon as patch cables but not in rolls. Would you run cat 8 from server to switch? Do you use Cat 8 at your own home? BTW I remember when I upgraded (early) from 10/100 to 1000MBPS networking, everyone said I didn't need it, but it helped a lot. They also said I didn't need SSD's but they helped too. Ben's law of computers- they're only fast enough for 3 months! Lol! Thanks for helping!
@RaidOwl
2 жыл бұрын
Cat8 is wayyyy overkill for a home setup. You shouldn’t need anything more than Cat6a for the longer runs or Cat6 for anything under 100ft. This is if you plan on doing 10Gbps networking. Anything less and you can stick with good ole Cat5e
@benbalzer9716
2 жыл бұрын
@@RaidOwl Thanks!!
@rednassie1101
2 жыл бұрын
Tell that to my impulsivity: I have a 10Gbit connection between my PC and server, but lately I have only really used my laptop on WiFi 😂
@RaidOwl
2 жыл бұрын
😂😂😂
@Dexter101x
3 жыл бұрын
I don't need 10Gb, I need 1000Gb Networking 😂
@RaidOwl
3 жыл бұрын
Yes plz lol
@EvanLéNoir
Жыл бұрын
I've been hearing about how wild 10gbps is. I'm installing a LAN in my house soon and was looking at the Omada system (for simplicity sake) I have a 'lite' Ubiqiti setup since it was 'cheap' at the time when I just needed a wireless network. I use my network for gaming, streaming and I have a central storage drive planned for the house. There are others who will be using the network to. So based on that, I assume 2.5gbps could get saturated in a hurry? Should I step up to 5gbps (and is it on Omada or Unifi?) or should I just go full 10gbps?
@rklauco
Жыл бұрын
Not running 10Gb, but using 10Gb between 2 switches as interconnection. One of the switches has PoE, the other one does not.
@markolafploeg3265
Жыл бұрын
Nice verry clear story thanx
@rdsii64
Жыл бұрын
Just this evening I transferred a 13.5 gig folder from one computer in my rack to another over 10gbe Fiberoptic SFP+. The file on the first computer was on a single SATA ssd and the destination drive on the other computer was an m.2 nvme. The transfer never got over 125MB per second. I'm Not sure why it was so slow. What might I start looking for?
@tnuwan4090
3 жыл бұрын
Super helpful. Thank you!
@kevinhughes9801
3 жыл бұрын
Good stuff thanks
@kimskaugvoll5499
3 жыл бұрын
That my favorite beer! Purple Haze are you from Louisiana?
@RaidOwl
3 жыл бұрын
I actually grew up in (near) Abita!
@kimskaugvoll5499
3 жыл бұрын
@@RaidOwl awesome, I live in Madisonville,LA. Are you still around here? I would love to learn some more from you and maybe do a collab of some sort?
@RaidOwl
3 жыл бұрын
Oh nice! Nah I’ve been in Texas the for last 7 years or so.
@rdsii64
Жыл бұрын
I didin't reallyl need 10GBE. I bought a used S2500 on ebay for the POE+ ports for my security cameras. It just happens to have 4 SFP+ 10GBE ports, so I used them.
@esmannr
Жыл бұрын
Yes and no. If you have a striped RAID across 10 drivers, the server is reading small parts, 1/9th to 1/7th conceivably, of the large file from multiple drives at the same time. The processor puts the parts together and sends the file, in pieces again called packets. I don’t have numbers, however, reading a 10 GB file from a drive takes longer than reading a 1 GB file. Switching to 10 Gbe isn’t as easy as buying the equipment and plugging it in either. For instance, to maximize the transfer spead, you have to activate Jumbo Packets in the network configuration at both ends. Also, any switch in-between has to be compatible with Jumbo Packets. I’m still tweaking my 10 Gbe network. I’ve seen 600+ MBs or 4.8 Gbs. Actually, the tweaking starts at the purchase of the equipment doesn’t it. There is a lot to consider before even buying the equipment. For instance, you can’t necessarily use the same cabling you had for your 1 Gbe network. Cat 5 and 5E are not sufficient. Your new equipment will function but not at 10 Gbe. Most likely the same with Cat 6. Cat 6A, 7, and 8 can work over short distances.
@EvenMadderMax
Жыл бұрын
Don't need it but got it anyway. Doubled my upload speed and back ups and transferring files is stupidly fast.
@wesleymostien
Жыл бұрын
Does the type of file system affect the speed of transferring a lot of files? For instance, can ZFS handle this faster than BTRFS? Or it's all the same?
@RaidOwl
Жыл бұрын
The filesystem can certainly affect how fast transfer speeds are. Searching the web will often lead you to dozens of different studies showing one being faster than the other and vice-versa lol.
@strandvaskeren
Жыл бұрын
I run a homelab with a bunch of servers doing all sorts of things. I desire 10 Gbit/s ethernet because.. reasons... it's shiny... However I also have LibreNMS monitor my setup, keeping an eye on my servers and network, and truth be told the only time I max out my 1 Gb/s network is for roughly half an hour during night time when my servers do backups and for a couple of minutes once or twice per week when I've ripped a bluray movie and uploads it to my nas. The rest of the time I have less than 5% utilisation.
@lifson22
Жыл бұрын
Sure, half an hour sounds like not a great value proposition, until you consider it would be 5 hours on 1Gbe. The short time it's used is the value...
@caennanu
3 жыл бұрын
Completely agree, but i don't think its not a valid thing for home users. Yes the average joe won't need it. They are simple Netflix users, even at 4k, they will only net about 40mbits per stream (aka 4% of a 1gb connection). It is more likely they will reach ISP bandwidth before exceeding home network bandwidth. When it comes to small offices or power users, it starts becomming a coin toss. Power users tend to be enthusiasts who are willing to spend the extra money, small offices generally don't see the purpose of the overhead (unless its a new office). When you're a poweruser and have a data server (or NAS) running, you may want to increase bandwidth. Talking about my decision making. to be honest, since i need PoE for my CCTV cams, and the fact i will need to upgrade 2 switches (1x 16 port and 1x 8 port) it becomes fairly costly. It would run me about 1k USD to upgrade it and the features it brings (aka waiting half the time for a file transfer) are not worth it to me at this point. Instead i'm opting to 'circle' my network, making use of the Spanning Tree Protocol. With that sure i would lose 2 ports on each switch ill have a theoretical bandwidth of 2gb's. Which would be nice, 1gb for home use, 1gb for CCTV use.
@RaidOwl
3 жыл бұрын
Yeah this is a perfect example of why I made this video. I wanted to get across that upgrading to 10Gb isn't like just buying faster storage or a better CPU. Thanks for sharing!
@strandvaskeren
Жыл бұрын
Look into link aggregation/bonding. Spanning Tree is a tool to prevent loops.
@silfrido1768
6 ай бұрын
Time to use my 10gb usb c port on my motherboard 😊
@meatwax
5 ай бұрын
My wife asked "should we upgrade to 10G?" No honey it's a marketing buzzword, we're fine.
@RaidOwl
5 ай бұрын
Send her this video and tell her to subscribe. I need my female viewership numbers bumped up lol.
@Denis7947.
Жыл бұрын
I need 10gb for downloading big files
@seamydobbsno1
3 жыл бұрын
What if NVME caching was introduced?
@RaidOwl
3 жыл бұрын
Depending on your use case then yes having a cache drive would help you to utilize more bandwidth. 10Gb networking is great, just gotta make sure to use it properly.
@Maisonier
3 жыл бұрын
10 Gb? please don't! we need 1 Tb !!
@RaidOwl
3 жыл бұрын
Haha more speeeeed!
@DjMrMors
2 жыл бұрын
Great video but i am still trying to understand, i have a server based on truenas with hdds drives and i am thinking adding a ssd on nvme cashe drive. The server and the pc are having 1gb ethernet port. I didn't noticed but i had bought a switch (cause i need more ethernet ports near my machines) which is 100mbps only and the speed is really low. So here is my question is in my system if i buy 2x10gb port cards and connect 1 on my main pc 1 on my server and link them together (pcserver) i would be able to reach theoretically 10g speed? Or it will need to pass through a switch? Also on my system using hdd drives i will be able to reach higher speeds?
@RaidOwl
2 жыл бұрын
You’d be correct in that if you made a direct connection between your pc and server with 10Gb cards installed then you’d have full 10Gbps speeds. That’s a common option for a lot of people if they don’t need 10Gb in multiple places.
@DjMrMors
2 жыл бұрын
@@RaidOwl firstly i will like to thank you for your response. I am new to all these and i am trying to make sense. All i wanted was a server for multiple thinks (media player,storage etc) your videos helped me at some point. Moreover I want to ask 2 more thinks: 1st even if i install 10g network cards i will be able to increase transfer speed on hhd drives that i am currently using? If yes how? And 2nd if you can help i am trying to hage access on nextcloud via remote access outside of my network any advice?
@antonisautos8704
Жыл бұрын
I need 10Gbps like SpongeBob needed water when he visited Sandy's tree dome. I've had to transfer large files on 1Gbps and boy I tell ya what I dont have the patience for that.
@RaidOwl
Жыл бұрын
Lol then go for it. Hell I’m running 40 gig now.
@antonisautos8704
Жыл бұрын
@@RaidOwl I have been gathering the parts. Building my own router and looking for network switch options that don't cost over 2000 dollars
@danielfatfingahs5649
3 жыл бұрын
You just exposed Linus Tech Tips!!!!!!
@RaidOwl
3 жыл бұрын
Lol nah they definitely need 10Gb and even that 40Gb they’ve installed.
@danielfatfingahs5649
3 жыл бұрын
@@RaidOwl I'm getting back in their forum with this video TONIGHT!!!
@RaidOwl
3 жыл бұрын
Oh no haha
@pbrigham
3 жыл бұрын
Even WIFI6 is faster than 1GB :) , maybe not 10GB, but there is a lot equipment out there already with 2.5GB as a standard and no doubt 2.5GB should be the new standard.
@RaidOwl
3 жыл бұрын
Yeah once we start seeing 2.5Gb replacing 1Gb on most switches/routers then I think that’ll be a nice upgrade.
@curtisbme
2 жыл бұрын
It is not faster than 1GB to a single client. Doesn't really even get close. It can only have more than a GB in aggregate.
@kewitt1
3 жыл бұрын
Need faster than dial-up nope. So everyone goes back to it. You can order a pizza with dial-up internet, you can watch a video on dial-up internet. You NEED food You NEED WATER you NEED AIR.. Everything else is WANTS!!! I WANT 10 Gbe for my NAS and my backup of my nas.
Пікірлер: 91