Wow...over the top "old school thorough build "..you really go the extra mile to make sure this build will last..good job!!
@joseluis8573
2 жыл бұрын
Thanks for everything you teach Sir,it is very useful
@lukerestlessstudios
Жыл бұрын
I have a dream of building a diesel powered setup some day. Just cause.
@reepusingh4249
Жыл бұрын
God blessings to your company please I need to know if the pump have a internal pressure relief valve
@cleanritepressurecleaning4076
2 жыл бұрын
Sweet build. Guys always tell me I’m crazy for taking a Kohler over Honda. I tell them to talk to me in 10 years about it.
@3rdcoaststeamcleaningroofc348
Жыл бұрын
I been washing 32yrs. I say that all the time!!!!! Kohler Vanguard Honda
@seattleprowash5464
Жыл бұрын
Shop I go to sellsboth for jetter trailers and says better reliability with the Honda 😳😳😳
@clintsaines9274
Жыл бұрын
Glad to see I'm not the only person who doesn't worship Honda.
@d4z_l20svaQ12
Жыл бұрын
Too many people buy honda's they are never in stock, and when they are in stock they go for nearly double msrp. A smart business person knows when it's time to switch to something else.
@seattleprowash5464
Жыл бұрын
@@d4z_l20svaQ12 my local shops got like 100 Honda gx690 in stock, they also use them for jetter trailers
@lukerestlessstudios
Жыл бұрын
If I find a Honda or Kohler from out of a lawn mower for example can I add a start and throttle panel to it? If so anyone know where I can get one?
@Johnholmes003
Жыл бұрын
Badass setup!
@earechiga08
Жыл бұрын
Do you run the engine at full throttle? Is there an issue with over speeding the pump?
@francop962
2 жыл бұрын
Them sweeping 90s on the pump, are they stainless or steel? If steel, are you concerned about rust?
@thepressurewasherschannel9109
2 жыл бұрын
No, I change all hoses yearly
@JUAN120484
2 жыл бұрын
Where I can the pump bottom holder
@tylerhovdebo
2 жыл бұрын
I’m trying to pick a pump, engine, and gearbox What specs on each piece do I use to make sure they all mate properly I would love to use the engine you did. Can you tell me the link to the website you found the best deal at And the gearbox and the pump. I would like to put a few together. Thank you
@gilmendoza8092
2 жыл бұрын
What’s your opinion on gear drive vs belt drive?
@thepressurewasherschannel9109
2 жыл бұрын
What do you think, less maintenance, smaller footprint, no vibration etc
@wash713
2 жыл бұрын
@@thepressurewasherschannel9109 at how many hours to do you change your pump oil ?
@thepressurewasherschannel9109
2 жыл бұрын
Engine gearbox pump every 100
@d4z_l20svaQ12
Жыл бұрын
I think people would argue with you over no vibration
@Johnnyreengo
2 жыл бұрын
Which udor pump is this
@3rdcoaststeamcleaningroofc348
Жыл бұрын
Do you know what size sight glass is on the gearbox?
@thepressurewasherschannel9109
Жыл бұрын
No call udor, They can answer that question
@3rdcoaststeamcleaningroofc348
Жыл бұрын
@@thepressurewasherschannel9109 appreciate the quick response
@OhioPalmTrees
Жыл бұрын
where did you get or how did you make pump support?
@thepressurewasherschannel9109
Жыл бұрын
I make them
@OhioPalmTrees
Жыл бұрын
@@thepressurewasherschannel9109 how much for purchase?
@francop962
2 жыл бұрын
Exactly which RTV sealant did you use? I know permatex sells different ones, all rated for "high temp."
@thepressurewasherschannel9109
2 жыл бұрын
Just ht rtv
@joseluis8573
2 жыл бұрын
Kolher or honda, which one do you prefer,im going to renew my 8gmp and i want a new 10 gpm
@thepressurewasherschannel9109
2 жыл бұрын
Kohler
@grownnotflown2
2 жыл бұрын
@@thepressurewasherschannel9109 wow. They certainly have been around a long time
@luxury65
2 жыл бұрын
Are you selling this?
@thepressurewasherschannel9109
2 жыл бұрын
This one is sold $4800, waiting on backordered engines
@s.o.c_914
9 ай бұрын
ANY NEWS ON THE DUALSUTTNER"GRENADE" TURBO I ORDRED FROM YOU MONTHS AGO? @@thepressurewasherschannel9109
@rabbitskinner
Жыл бұрын
No thanks I'll go belt drive
@johnmackay8732
2 жыл бұрын
Awesome build
@jredd801
2 жыл бұрын
Good info, looks like a great setup.. i hope these new kohlers are better than the previous generation 👍
@grownnotflown2
2 жыл бұрын
It's amazing how long kohlers been around. Getting harder to find a honda day by day.
@seattleprowash5464
Жыл бұрын
@@grownnotflown2 are they? Bruh my local shop got like 50 of them
@ExpertPowerWash
2 жыл бұрын
Looks good
@symplemynd57
2 жыл бұрын
What did you end up doing with that 1/8th inch gap between the gear drive and the engine crankcase? I didn't see you install any shims or spacers. Great info BTW.
@thepressurewasherschannel9109
2 жыл бұрын
What…… think about what u r saying, if you didn’t have that gap it would punch a hole in the gear assembly
@symplemynd57
2 жыл бұрын
@@thepressurewasherschannel9109 when you fitted the gearbox the first time it bottomed out on the crankshaft and you still had a small gap between there. That's what it looked like. 11:06. Must be the camera angle and which mounting holes you were using.
@francop962
2 жыл бұрын
@@symplemynd57 When everything was together, from what I gathered, he had an 1/8" gap, so there was "space" between the gearbox wall and end of the shaft. To close for my comfort. Me personally, I woulda shimmed it just to be sure. He is right, lots of folks dont measure and punch a hole in the gear box and there is $300 down the drain!
@thepressurewasherschannel9109
2 жыл бұрын
Made dozens, it will be ok, no shims
@FlashTechEngineering
2 жыл бұрын
What’s the wall thickness on the stainless steel sweeping 90 degree bends, given me an idea I might custom make some and Tig weld fittings on
@michaelhebert8197
2 жыл бұрын
I really like this set up.. Can you give the gearbox, 90's and pump number or links to oder them please?
@ohmimprovement5767
2 жыл бұрын
Man! I'm a plumber and have 2 Honda iGX800's tied together on one big skid i use as a hydro jetter, id love to have gotten udor pumps with it rather than the general pumps but it'll do for now. However, I need them long sweep 90°'s for the pumps! I knew better than to put regular 90°s on the pumps and didn't really wanna use 2 45°'s. I didn't honestly think they made long sweeps! That's fantastic to see, now the question is.....where do I find them?
@thepressurewasherschannel9109
2 жыл бұрын
Any hydraulic supply
@seattleprowash5464
Жыл бұрын
What’s wrong with the general pumps? Heard they’re great
@tylerhovdebo
2 жыл бұрын
Very informative video Why did you choose Udor instead of general, AR, or comet Thank you
@thepressurewasherschannel9109
2 жыл бұрын
Nothing pumps like a Udor& custom service is great
@tylerhovdebo
2 жыл бұрын
@@thepressurewasherschannel9109 excellent So I am good to buy an udor 10gpm 3000psi How many hours do they last for you company Thanks
@luxury65
2 жыл бұрын
Very nice, looks solid, great great idea about the bracket on the bottom of the pump
Пікірлер: 59