Thank goodness for this video bro. Just got my downpipe installed and had no idea how to take the CEL off, until now. Thank you!!!!
@MoisesEmpire
3 жыл бұрын
Lol your welcome!! Enjoy the new down pipe!!
@idkidc3192
2 жыл бұрын
@@MoisesEmpire if your still responding what about a high flow cat?
@MoisesEmpire
2 жыл бұрын
@@idkidc3192 this method will also work for that.
@askaskme46
6 ай бұрын
I’ve been living with the CEL for over a year and this video saved me bro
@MoisesEmpire
6 ай бұрын
Glad I could help!
@brandonwndjdn
4 ай бұрын
Been having for years about to do this 😂
@dwuann4493
Жыл бұрын
Did you ever have a problem with the check engine light coming back on after this? Idk why my car is doing that
@MoisesEmpire
Жыл бұрын
Nope. After this it never came back.
@Acura_mechanic
2 жыл бұрын
The light is very annoying for sure. Thanks for the video
@MoisesEmpire
2 жыл бұрын
Sure is. Your welcome.
@Brrreezzyy
3 жыл бұрын
My engine light is on for p145c and p0457 do u think that can get rid of IT
@MoisesEmpire
3 жыл бұрын
Its possible because doing this disables the sensor. Like its not there.
@deerkings
3 жыл бұрын
When you put you cat less down pipe and front pipe on did you car ideal a little rough when you first started it up before you had to re flash your car
@MoisesEmpire
3 жыл бұрын
Not that I can remember. Only difference i remember was that it was much louder lol.
@deerkings
3 жыл бұрын
@@MoisesEmpire Hey buddy update on our car. LOL make sure everything is plunged in that's the reason why my car was idling funny lol. But when we put the PRL catless down pipe on and we got everything figured out we started driving it and that stupid emission light keep popping up on my dash with the Ktuner V2 I kept resetting it on my Ktuner could not figure out what the heck was going on well we did when we got home from a cruise in we thought we disabled everything the first time we did it but when we flashed the car first then disabled it lol ops but we are good know after I watched this video again I went back out like I said hooked it up sure enough the two codes where not checked we have a custom stage 1 tune. So now they are checked saved and uploaded to the ECU. This is our very first time tuning a car by ourselves I never done it before but the way you explained it man 1 click here click here click here boom done so we are golden. So thank you for your video that was so much help.
@MoisesEmpire
3 жыл бұрын
@@deerkings lol im glad it all worked out in the end and that my video was able to help you. Have fun with the car!
@deerkings
3 жыл бұрын
@@MoisesEmpire thanks buddy we will. Thank you again
@alonzoian7395
4 жыл бұрын
Ur vids absolutely helps me a lot especially in my research. Just wondering do you need internet for ktuner to work?
@MoisesEmpire
4 жыл бұрын
Awesome Im glad I could help. You do NOT need internet for the ktuner to work. Only time you would need internet is if you need to do an update to the ktuner unit.
@djsthemetereman
Жыл бұрын
I have a 21 Type S with IMR catted downpipe plus secondary is catted as well, I also have K tuner but just recently the check engine light came on for code p2270 which has to do with the sensor on the cat, now unfortunately the k tuner only comes with stage 1 tune for my car because I was doing my representative that the ECU for this car is a bit complicated so I can't change any parameters in the car as of now so I can't disable O2 sensor
@MoisesEmpire
Жыл бұрын
Dang thats unfortunate. Try using one of those 90° extensions for the O2 sensor. I never tried one but I hear they help keep the engine light away.
@djsthemetereman
Жыл бұрын
@@MoisesEmpire Actually IMR installed it for me & he did put a defouler on it but maybe it's just malfunctioning
@carlosvillalobos8431
4 жыл бұрын
It disables it okay. BUT would the CEL come back on in the future if I have other engine problems? or does it completely remove it and it never comes back on?
@MoisesEmpire
4 жыл бұрын
This only disables it for the O2 sensor on the down pipe. So YES If another sensor or anything else goes bad with the engine, the CEL light will turn on.
@lifeofhardknocks.3280
3 жыл бұрын
I just disabled the cel and the code still came on this morning only drove for about 15 minutes after hoping it was a one time thing that corrects itself car still ran great.
@mikeeyyyy9681
3 жыл бұрын
@@lifeofhardknocks.3280 what engine code was it ?
@lifeofhardknocks.3280
3 жыл бұрын
@@mikeeyyyy9681 no my dumbass left the light on killing the battery, I thought I reset it but it's still pulling more then stock boost. Jumped the battery working fine now
@MrTomekat
2 жыл бұрын
Did your car pass inspection after doing this? Thanks 👍
@MoisesEmpire
2 жыл бұрын
I live in Florida and there are No inspections here. So its not something I ever need to worry about.
@MrTomekat
2 жыл бұрын
@@MoisesEmpire word
@GabrielLopez-fi3tz
Жыл бұрын
So I have a ktunerv2 but it don’t have the code p0420 in the options to erase the code.keep getting check engine light since I stnalled the down pipe you have any idea bro?
@MoisesEmpire
Жыл бұрын
Flash it again doing the steps in mention in this video and it should go away
@L00NEYTUNE_
3 жыл бұрын
Does it matter which type of computer/software to make ktune even possible??🤔 I’m new to all of this
@MoisesEmpire
3 жыл бұрын
Any windows computer. Apple wont work. U just go to the ktuner website and download the program and follow the steps on the screen.
@ericguerrero5828
2 жыл бұрын
I’m on tsp stage one and just installed catless dp and fp with IC and charge pipes would I need to reflash after ? Also had this problem so thanks for vid !
@MoisesEmpire
2 жыл бұрын
Yes becuase of the catless dp. That requires a reflash.
@tylerMRDX
2 жыл бұрын
I️ got a prl intercooler/charge pipes, act clutch kit, mishi moto oil catch can, and a prl cobra cai and now im getting a uo131 code and I️ can’t find anything online about it do you know why?
@dreywezy1887
2 жыл бұрын
Mine popped up still after disabling P0420. Also my ktuner doesn’t show P0299 in the disable monitor section? I have a 2018 civic si
@MoisesEmpire
2 жыл бұрын
Weird. All I can suggest is that you try and flash the car again. Maybe u missed a step in the process or did something in the wrong order.
@dreywezy1887
2 жыл бұрын
@@MoisesEmpire I’ll try doing that again in the day. I’ll update you
@Nick-jc1go
8 ай бұрын
Do you have to retune if you alreadly have a tune or can you edit ?
@MoisesEmpire
8 ай бұрын
Technically both. If you want to edit something, you then have to upload that edit to the car which is technically retuning.
@samuelsolares3587
4 жыл бұрын
Let’s say that you need to pass emission inspection will this help you out with that ?
@MoisesEmpire
4 жыл бұрын
To be honest im not sure. Where I live we don't have emission inspections so I don't have any experience with that.
@717PROJECT
3 жыл бұрын
I believe as long as the CEL is not on you should be good. I just asked my mechanic the same question,
@nelsonmazariego9693
2 жыл бұрын
Question does it matter if it a Honda hatchback cvt would I be able to use the same steps?
@MoisesEmpire
2 жыл бұрын
Yeah same steps. Transmission might be different but everything engine related is the same.
@peterlopez4087
Жыл бұрын
will it pass emissions after removing code
@MoisesEmpire
Жыл бұрын
Not sure to be honest. I live in Florida and we dont have to worry about emissions here.
@nbamixproductions3783
Жыл бұрын
Would you know if this work with a 27won downpipe if I followed the same steps
@MoisesEmpire
Жыл бұрын
Yes. It will work for any down pipe since your just changing the setting to the sensor and turning it off.
@nbamixproductions3783
Жыл бұрын
@@MoisesEmpire Thank you so much I appreciate it a lot
@iiAzT3Cii
3 жыл бұрын
Maybe you can help me out. I installed a cattless dp today on my accord 2.0 & totally messed up by forgetting to disconnect the neg battery terminal before disconnecting sensors. Now I have 11 CEL all relating to the sensors I disconnected. Could i clear codes with an obd2 scanner?
@MoisesEmpire
3 жыл бұрын
Yes that should work. But you might still have a CEL because of the catless down pipe. Unless u have a tuner or I hear that a 90° O2 sensor adapter will also work.
@iiAzT3Cii
3 жыл бұрын
The downpipe i bought came with a bung for the oem o2 sensor. Do you mean i should weld a different 90 degree bung & take off the one it came with?
@bjrafael7790
3 жыл бұрын
So I have a catted MaProformace dp, my emissions came on hours later after install, would I just follow these steps for it to go away?
@MoisesEmpire
3 жыл бұрын
Yes. These steps will turn off the sensor on the dp so that you dont get any lights on the dash.
@bjrafael7790
3 жыл бұрын
Awesome thanks bro
@mrsaneo1717
Жыл бұрын
I have the k20c2 with the rv6 cat-less downpipe and I disable it and it keeps popping up after a couple of miles
@MoisesEmpire
Жыл бұрын
I'm not sure why. It worked for me and light never came back.
@kevkev4719
3 жыл бұрын
I appreciate your video man ! You’re very much of help man !
@MoisesEmpire
3 жыл бұрын
Im glad I could help!
@mig1739
6 ай бұрын
Hey thank you for the video this helped a lot.
@jl5456
3 жыл бұрын
Where did you get the carbon fiber for the wheel? I can never find the right ones
@MoisesEmpire
3 жыл бұрын
www.synthcarbon.com/collections/frontpage
@tshepper2539
2 жыл бұрын
Would you pass echeck after disabling it?
@MoisesEmpire
2 жыл бұрын
Sorry but I don't know what echeck is.
@niharpandit3355
4 жыл бұрын
Hey, would I need to reset the car to factory before or after installing the DP, or just change the setting and reflash after I have installed the DP? And did the code come back after driving certain miles?
@MoisesEmpire
4 жыл бұрын
Just change the setting and reflash after u install the DP. If done correctly then no codes or lights will appear. Im about 10k miles after my install and still no lights on dash.
@niharpandit3355
4 жыл бұрын
@@MoisesEmpire awesome thanks! I have to wait till Sunday. I also read that some people disable the slow 02 sensor as well but hopefully I don't have to do it.
@MoisesEmpire
4 жыл бұрын
@@niharpandit3355 ur welcome! Good luck with the install of the DP. I know the bolts are on there tight but DO NOT use power tools or you will strip and break them. Do it by hand with a breaker bar.
@niharpandit3355
4 жыл бұрын
@@MoisesEmpire thanks bro! I actually decided to have this guy install it for me. He works for Honda and he does weekend jobs on the side. So he will charge me 100. I'd rather trust him then my clumsy self haha
@tuantran-ew4lo
4 жыл бұрын
what type of ktuner did you use? v2 or v1.2. I noticed there are some diferences between those. Especially the Disable thingy
@MoisesEmpire
4 жыл бұрын
I have the v1.2 they are the same as far as what u can do tuning wise. The good thing about the V2 is that you have the screen which lets u switch tunes without the need for a laptop. You can also monitor things like temperature and boost PSI and if your car is a 6 speed manual then I believe u can setup shift lights so you know when its good to change gears.
@thosetwodudes
Жыл бұрын
So you can't clear the codes without doing a new tune?
@MoisesEmpire
Жыл бұрын
Dont think so. Tuner is not made to clear codes. Its made to make adjustments to the car.
@ryani5604
4 жыл бұрын
I just got the PRL downpipe installed, and I followed your steps, did everything right all the light went away, then when I left the car for about 20 mins and drove somewhere and as I was reversing all of a sudden all the lights came back on. Do you know why it did that?
@MoisesEmpire
4 жыл бұрын
What lights are coming on?
@ryani5604
4 жыл бұрын
@@MoisesEmpire pretty much all the lights popped up
@MoisesEmpire
4 жыл бұрын
@@ryani5604 then ur gonna have to do the steps again. It must have not loaded to the car correctly because the catless down pipe should only make the check engine light turn on and nothing else. So if you have multiple lights poping up then something didnt go right when u did the tune.
@ryani5604
4 жыл бұрын
@@MoisesEmpire I just re did it and now it's working properly
@Bartsimpsons0n
4 жыл бұрын
good vid. thanks keep it up
@kentrnh
2 жыл бұрын
I installed a catted high flow down pipe mine keeps popping up every 50 miles
@MoisesEmpire
2 жыл бұрын
Yeah its sucks when it pops up. Gotta either custom tune the car or just disable the sensor like I show in this video.
@ZMan377
2 жыл бұрын
Worked great!! Thanks!!
@harlvarquez9995
2 жыл бұрын
Is it the same thing with catted dp?
@MoisesEmpire
2 жыл бұрын
Shouldn't need to do anything for a catted dp but yes the same steps will work for catted dp if its needed.
@hunteranderson7007
3 жыл бұрын
How was your mpgs after the delete? I've been thinking about doing this to my 9th gen SI with gas prices soaring. I would assume they would skyrocket but at the same time do you need a custom tune to adjust for the delete to see actual gains?
@MoisesEmpire
3 жыл бұрын
No change in MPG that i could tell. You do not need a tune to see gains but a tune will give u even more gains. A tuning device is more used in this case to get rid of the check engine light like I show in the video.
@morbidmisfit4335
3 жыл бұрын
I tried to disable it but I get an error saying that the unit is locked to an ecu that doesn't match the one you are trying to flash.. using the same laptop I installed everything on.. can you or anyone help me with this? Am I the only one it happened to? T.I.A.
@MoisesEmpire
3 жыл бұрын
Did u buy the tuner used? Sounds like the tuner is programmed to another car.
@morbidmisfit4335
3 жыл бұрын
@@MoisesEmpire nah it was brand new and even installed the dual stage tune too
@MoisesEmpire
3 жыл бұрын
Yeah u can install tunes on it but if the tuner has ever been used on another car then it wont work on yours unless its been unlocked from said previous car. But if it is new and only ever been on your car, then u might wanna try to unlock it from your car and add it again after. Make sure its plugged into the car properly.
@chalachasca
Жыл бұрын
Thank you my guy
@MoisesEmpire
Жыл бұрын
Your welcome
@kennyg6266
3 жыл бұрын
Hey I’m having same problem with same thing ,I reset on ktuner still pop up all the time any help ??
@MoisesEmpire
3 жыл бұрын
What problem
@kennyg6266
3 жыл бұрын
I have a catless downpipe front pipe I flashed the car clicked the box for catalystic efficiency and within maybe 15 miles of driving the check engine light would come back on I have tried several times to clear this code but at this point i don’t wanna keep re flashing the ecu as I’m sure it’s Probally not good for it what should I do
@MoisesEmpire
3 жыл бұрын
If your following all my steps exactly (check the box for the cat before you flash the car) then maybe the check engine light is turning on for a different reason.
@kennyg6266
3 жыл бұрын
Ok I’m gonna get it checked out I don’t what else could throw emission code as well
@MoisesEmpire
3 жыл бұрын
@@kennyg6266 just look around the engine bay and make sure everything is plugged in correctly and nothing broken.
@andrewpartida1427
4 жыл бұрын
Will this work for the cvt
@MoisesEmpire
4 жыл бұрын
Yes. Same steps to do it.
@wilfredovega3521
Жыл бұрын
Thank
@angelroldan3647
3 жыл бұрын
Which k tuner do you have ?
@MoisesEmpire
3 жыл бұрын
The small one. V1.2
@the_batmobile0.4
4 жыл бұрын
Hey men how's the drone?
@MoisesEmpire
4 жыл бұрын
Its barely there. You get most of it during a cold start but then it goes away and is barely noticeable.
@the_batmobile0.4
4 жыл бұрын
@@MoisesEmpire ok
@orcahang21
Жыл бұрын
Good 👍 ASS job Brudda ✌.
@MoisesEmpire
Жыл бұрын
Thanks!!
@congear8623
4 жыл бұрын
👍👍👍
@miguelbrown3050
8 ай бұрын
This causes your vehicle to run rich and sluggish when turning it off. Would be better off just leaving it on.
@leoeduarte1173
4 жыл бұрын
If you dont have prl MAF should it be left at custom? For MAF calibration
@MoisesEmpire
4 жыл бұрын
Yes just leave it at custom. If its not the prl RACE MAF then you dont need to tune it so just leave the tuning part alone.
@leoeduarte1173
4 жыл бұрын
Moises Empire thanks, I just flashed my car with k tuner, how safe is it to run that tune on a cvt?
@MoisesEmpire
4 жыл бұрын
@@leoeduarte1173 from what I hear its perfectly fine. But I have a manual so i cant give u any personal experience.
@717PROJECT
3 жыл бұрын
@@leoeduarte1173 mine hesitates at full throttle on stage 5 18psi. I have PRL catted downpipe and front pipe. Still waiting on my Invidia Exhuast to come.
@hypeskii4443
3 жыл бұрын
Mine hesitates at full throttle too
@J35Y6.B58
Жыл бұрын
Work on a 15 tlx?
@MoisesEmpire
Жыл бұрын
Its should if you have the same option in your tuner device.
Пікірлер: 124