Makes me want to get one. (after saving my pennies :-)
@ichbic
5 жыл бұрын
Hopefully I'll be able to buy one in the future
@vahpr
4 жыл бұрын
If the PathPilot controller is located in the electrical box rather than the suggested location would RFI be a problem?
@billb295
3 жыл бұрын
Im buying a used 1100M. Does anyone know if the 1Ton Harbor Freight engine hoist will work for the install? The weight is ok but not sure if it meets the lifting height needed. The seller is taking it apart.
@l3idesign
2 жыл бұрын
1 ton does not lift it high enough and the machine is way beyond the 1/4 ton rating of the highest position. You need the 2 ton version.
@PowerSports
2 жыл бұрын
Torque specs for the SHCS used to mount the mill to the stand? "do not over tighten" isn't very precise...
@tormachinc
2 жыл бұрын
The precision happen later when you commission the mill. kzitem.info/news/bejne/uHpts6xpnnmelWk
@stephfong4577
4 жыл бұрын
At 8:55, I see values in X, Y, Z. Does that mean the machine zero is set up and stored prior delivery? And when installing, we don't need to set the machine zero?
@tormachinc
4 жыл бұрын
Our machines have a home position based off of their limit switches but you will then have to set your work coordinate offset (WCO) to match your setup. Take a look here to see how Jason uses a Haimer to set up a WCO, kzitem.info/news/bejne/wpBpuopmjpejfZg.
@sfcordova1975
2 жыл бұрын
At 1:55 it shows the Y axis motor with the connections on the bottom however later in the video it shows the connectors rotated 90 degrees… well… that’s because the Y axis motor does not fit with the connectors on the bottom. Oh boy. Just getting started with assembling mine and I’m already concerned.
@tormachinc
2 жыл бұрын
We are compiling a list of changes for some of our older installation videos and plan on making some updates, and in the case of the 15L Lathe probably redoing the entire process. In the meantime check for the latest install document on the website. tormach.com/docs
@BrandonPrentice
Жыл бұрын
Great video! I just booted up my 1100mx but I my issue now is that the coolant pump won't turn off. The LED indicator for "coolant" is off on my pathpilot, yet the pump just runs continuously. What am I doing wrong?
@tormachinc
Жыл бұрын
Setup a support ticket with out Tormach Technical Support team so they can help you out. tormach.com/how-to-submit-a-support-ticket
@flynifty3951
3 жыл бұрын
Is it possible to get the 1100mx with more RPM ? Thank you 🙏
@majesticdragonfly
8 ай бұрын
How can I fit the machine in what is already a small door? I really want this machine. However, homes in England can be quite small. The door at 1:08 is that size sufficient to bring the machine inside?
@tormachinc
8 ай бұрын
There is a way to do this, which we call a "Door Way Dance," but that is dependent on the size of your door. Also, is this going into a dwelling? Houses in England can be smaller so you will need to determine whether you have enough height. Here is a link to a blog post covering the door way dance: tormach.com/articles/doing-a-door-dance-the-tormach-way And here are some documents on the dimensions of the 770M/MX and 1100M/MX tormach.com//media/asset/3/8/38874-a_7_.pdf tormach.com//media/asset/3/7/37998-a_8_.pdf If you need to talk to someone, please setup a support ticket with one of our Tormach Technical Support Members here: tormach.com/how-to-submit-a-support-ticket
@jasko346
3 жыл бұрын
Why is the time going so slow when you're waiting for your mill to arrive...ugh. Few more weeks.
@tormachinc
3 жыл бұрын
We are truly sorry about the shipping delays. All the ports are experiencing a backlog of containers. Once it does arrive, we hope the wait will have been worth it.
@jasko346
3 жыл бұрын
@@tormachinc don't worry about it. Gives me time to prep everything else. :)
@danl.4743
5 жыл бұрын
Not an "M" question, but: What would you recommend the auto oiler interval and oiling duration for the 1100 s3? Mine is set to 4 seconds. (Every 240 minutes i think) Also, if the machine was not turned on for more than a week, would you manually press the oiler to oil the machine, or would you wait for the few hours left on the interval for the counter to count down (from the previous oiling) until it will oil it? Thanks.
@tormachinc
5 жыл бұрын
On the PCNC 1100 and the 15L Slant-PRo Lathe, the interval time should be set 480 minutes, while the actuation time should be set to 12 seconds. If you plan on not using the machine for long periods of time, we recommend powering off the machine to prevent over-oiling.
@danl.4743
5 жыл бұрын
@@tormachinc Thank you. I'll change it than. But I'm afraid you misunderstood my second question. ( I know not to leave the machine on for one week). I am asking if the machine was OFF for like a week, and I turn it on again. The counter might say 2-3 hours remain to oiling. Should I manually press the oiler to oil it "NOW", or can I just wait for the remaining hours on the counter to run out, to oil it by itself in 2-3 hours. Thanks. :)
@tormachinc
5 жыл бұрын
When the system turns back on, the automatic oiler will power up and send oil through the system. Then it will follow its programmed schedule.
@adanjvarelavilla6350
4 жыл бұрын
Hi, I hope you can help me I stared assemble my tormach 1100mx I order the path pilot console and the enclosure< on the video after you install the automatic oilier you install the control but I can install the control yet because the console is attached to the enclosure, also to install the tool changer you have to move the table but I can't move the table because the control is not installed yet, so can I assemble everything and after install the control make the adjustments? also on the video on the aluminum block on top of spindle is two orange air hose on my machine is only one air hose, why? that is correct? thank you.
@tormachinc
4 жыл бұрын
The Owner's Manual has been updated since this video was made, and that section of the procedure has changed. Please download the Owner's Manual from this link, but if you do run into issues, please reach out to the Tormach Technical Support Team: tormach.com/support/mill
Пікірлер: 29