Check out the *COUNTERSPELL MINIATURES KICKSTARTER* : bit.ly/CSpellMINIS
@FacilityD20
3 жыл бұрын
As a DM the word "Counterspell" gives me nightmares at this point ahaha
@alaskankare
3 жыл бұрын
man these resin minatures make me want to get a printer. lol thankfully they are too far out of my budget!
@BlackMagicCraftOfficial
3 жыл бұрын
@@alaskankare the Kickstarter is actually for physical minis. Resin cast, not files to print yourself.
@Chris-so1tn
3 жыл бұрын
Love your stuff brother! Hey, I wanted to tell you about an experiment I ran the other day. I am making an Vivarium Rock Background and was experimenting with pre-coating the blue styrofoam from home depot. I dipped a piece in Kiltz 2 and another in Mineax Fast Dry Gloss Urethane and let them dry overnight . After that I tested applications of acrylic paint and an ink wash. I used army painter paints and washes. I let those dry over night too. I then ran the pieces under my sink faucet to try and rub off the paint and ink wash. The paint adhered a lot better than the ink wash to the Kilz 2, but with some effort could wipe both off under running water. When I did the same to the pre-dipped minwaxed foam, the paint and the ink wash would not rub/wash off! And I rubbed and rubbed with my thumb to try and get them off. Dipping foam in Minwax before painting seems the make an amazingly durable bottom coat and adds strength to the finished paint without even sealing it afterwards! Note: I know minwax can take many days to fully cure, so by painting only after 12 or so hours, I may have exploited a way to bind the paint with the minwax.
@Wolfking583
3 жыл бұрын
jeremy, why not line xps with baking sheets, push the pins down all the way at different angles and put dollops of hot glue on the end caps for that fantasy/comic domed shroom look? just something i thought about!
@1945atombomb
3 жыл бұрын
"I'm just building and painting models that look cool." This applies to about 98% of all Ork players out there. Just amazed by the details you were able to put into this piece. Glad you shared it with us.
@tymoteuszkosinski5352
3 жыл бұрын
That also applies to me, owner of 8 armies, none above 1000 points 😅
@nekrataali
3 жыл бұрын
Can confirm. Am Ork player. Orks haven't had a competitive codex in over a decade. So now it's just rule of cool and slam that shit on the tabletop.
@ReddCrystal
3 жыл бұрын
@@tymoteuszkosinski5352 only 1 year of knowing what this hobby is and I already own 4 armies, two of 350 something points and two of over a thousand, as well as a knight castellan I have yet to even build. All unpainted, aside from some orks I used to test paints. I feel like I am soon to become someone like you.
@tymoteuszkosinski5352
3 жыл бұрын
@@ReddCrystal honestly I don't complain, I don't have anyone to play with, so I can really just paint what I want (and my backlog now only contains less than 30 models!)
@ReddCrystal
3 жыл бұрын
@@tymoteuszkosinski5352 yeah I feel like I'm going to spend a lot more time on the hobby side of this..er...hobby than the gaming side as well, but getting my backlog from quite a few hundred grey models to something as small as 30 seems like something my willpower, energy or skill won't be capable of
@kristoff7049
3 жыл бұрын
Love the ethic of the “looks cool army”
@Monkeyshaman
3 жыл бұрын
As someone building competing vindicators and bikes armies growing up I can promise its the only way to play.
@roninwolf3347
2 жыл бұрын
Precisely how im tackling my ironjawz waaagh clan. I dont even play just want to build customize stuff and paint.
@darixpable
3 жыл бұрын
As a death guard player i say that you nurgle’d a model that wasn’t nurgly at all; i love it
@roninwolf3347
2 жыл бұрын
This one is powerful in the nurgling
@FlawSmith
3 жыл бұрын
Your Nurgle has sprung a leak. It looks awesome, great job.
@MiniatureHobbyist
3 жыл бұрын
I almost like nurgkes as much as orks, I feel with either doesn't matter what you do to them it looks great lol 🙂
@te9591
3 жыл бұрын
That's by in large due to their decay and scrappy aesthetic?
@adog6495
3 жыл бұрын
There are nurgle Orks
@redbear2113
3 жыл бұрын
I prefer orks, just because Nurgles are in the lore completely disgusting.
@mystrangebrain9240
3 жыл бұрын
@@adog6495 no way
@adog6495
3 жыл бұрын
@@mystrangebrain9240 yup
@MiketheWarhost
3 жыл бұрын
If anyone is curious about the ogre model used, it's the Legendary Vor Khet model from Wild West Exodus.
@BlackMagicCraftOfficial
3 жыл бұрын
Thanks, I couldn't for the life of me remember. I don't even remember how I got it.
@MKempICI
3 жыл бұрын
If my first reaction to a model is "Kill it with fire!", then you know you have done Nurgle right.
@MrPug-dt4sd
3 жыл бұрын
13:27 Those back-of-leg teeth are just horrible, amazing job.
@MrStatistx
3 жыл бұрын
I love the Hellbrute, but I also don't mind what you did with it. Also jealous of you getting random sprues with something like that in it AND jealous of your vallejo texture paste shelf up there.
@WillMontgomery85
3 жыл бұрын
100% agree the hellbrute looks like derp on a stick. Really love the conversion you did. Very interesting end result and looks especially papa nurgle. Also love the pope hat thing.
@Ainar86
3 жыл бұрын
Tau wanted to get on your derp scale but they fell off a cliff.
@JC559
3 жыл бұрын
I took a Hellbrute and converted it into a living Skaven Warp Lightning Cannon at the start of this year. It's still one of my favourite models to date!
That tube emptying out his guts is really unpleasant. :D Well done.
@pezboy350
3 жыл бұрын
I'm always surprised by the range of reactions to GW models. The Hellbrute may be the model that got me into the hobby, watching a series of someone painting one several years ago, thought it was totally rad. Yours is way radder. Would love to see you Nurgle up an imperial knight. Thanks for the hard work and hope your family is doing better since everyone got sick!
@BlackMagicCraftOfficial
3 жыл бұрын
Thankfully the other week my girl just had an upset tummy and was fine after. Powering through all the other stuff. I am positive I will one day do a Death Guard Imperial Knight in my style :D
@Ainar86
3 жыл бұрын
I was just about to comment the same thing. I actually like the look of Dreadnoughts and all the related models but I find many others incredibly derpy when others say they look amazing. Chief example was the hype around new SoBs, everyone would say they look amazing now but all I see is a slightly more detailed version of those old angry dudes in boob armor and the vehicles are even worse. I'm currently working on a convo that I hope would satisfy my need to see the vision of sororitas I have when I read the lore. On the other hand I would never have thought to mod a Hellbrute and could not visualize something as amazing as what Jeremy created.
@MonkeyJedi99
3 жыл бұрын
@@BlackMagicCraftOfficial That is good news. I don't know you personally, but I don't wish bad things on decent people.
@roninwolf3347
2 жыл бұрын
I myself have an obsession with orruk looted stuff like orruk frigates and ork knights and the likes but at the same time absolutely love watching people nurgling things up.
@Lamefoureyes
3 жыл бұрын
When you added the spewing filth from the pipe it almost made me dry heave, so I'm thinking that's spot on for Nurgle. Be safe in the 'Peg!
@WilSisney
3 жыл бұрын
That base is so NASTY looking! I love it! I've never tried kitbashing, really, but this is a satisfying result! You've got serious skill Nurgalizing models!
@therealsulaco
3 жыл бұрын
00:45-1:00 Hard same. I'm sure my Space Wolves "list" would be laughed out of a tourney but I make it and play it cos it looks cool and makes me happy.
@dawnjackson5773
3 жыл бұрын
Yes! I love these kind of videos! I learn so much from them that I apply the tech. to other minis i am working on.. Not even the same type of minis either.. It is about learning those techniques to create all sorts of fun minis.
@BlackMagicCraftOfficial
3 жыл бұрын
Most hobby things are universally useful! Glad you see that :)
@zid_just_zid
3 жыл бұрын
Cutting resin, especially big lumps like that id do using a jewelers saw, since its on a bow you arent limited to a cutting depth equal to the radius of whatever cutting disc you are using. The side of the cutting disc also wont be grinding the whole depth of the cut all time so a lot less dust will be created, taking care still recommended tho.
@TheKesslerFoundation
3 жыл бұрын
Cutting plastic and even resin is so much easier than cutting metal back in the day.
@zid_just_zid
3 жыл бұрын
@@TheKesslerFoundation Ive done some conversion on older pewter minis using a jewelers saw and it works great there too, was able to remove the center part of a shoulder pad, leaving the trim untouched and glue in the center from another pad to change the molded chapter icon from blood angels to crimson fists :)
@DragonaxFilms
3 жыл бұрын
I love how gloriously nasty your Nurgle models are. There's so many different ways to approach the variety of textures they have, and it's always a treat seeing how different hobbyists tackle them :D
@leewat3742
3 жыл бұрын
That looks awesome. I started painting minis in the early 80's then motorcycles came into my life in the late 80's and the hobby was forgotten, speed was way much more fun, over the last few years I have got back into painting and just recently trying to make terrain pieces out of xps foam and yours and many other youtubers in the hobby have taught me loads. I am making a stubby fantasy tower with lights in at the moment and am going to move onto a Ork 40k defensive line / garage in a bit to go with my war bikers and trike. Thanks for the inspiration to build things. Big hugs, Lee.
@miguelmora7564
3 жыл бұрын
As a fellow Death Guard player, all I can say is *chef's kiss*.
@corbingovers7559
3 жыл бұрын
I have a Skaven Warlord on Brood Horror I converted from an Lord Discordant and a Doomwheel. I spent HOURS pouring over the plans then testing and refitting before cutting. welcome to the kitbash community.
@voldmar
3 жыл бұрын
As a person has never built any model, I’d try to make a molding of ogre legs though cutting may be easier
@abelbabel8484
3 жыл бұрын
Excellent idea
@marcellogenovese199
3 жыл бұрын
Or just use the original legs with the kit since he covered everything in blobs anyway lol.
@stagesidefpv748
3 жыл бұрын
For cutting resin, I have been using a old school hand hobby saw and it cuts like butter without throwing as many particles in the air.
@syndromBE
3 жыл бұрын
John Blanche would be proud! Amazing conversion and suitable grimdark paintjob!
@altumwargaming638
3 жыл бұрын
The Hellbrute is actually one of the models that really turned me to chaos marines. I don't know why a monster/deamon fused with a dreadnought is the coolest thing to me.
@lucabastianello9830
3 жыл бұрын
Nice to see someone else study the instructions to see the potential of a model^^
@autumnhannah2368
3 жыл бұрын
Thats what I imagine when I think of death guard especially after listening to the Mortarian horus heresy origin book. It really details how twisted the legion became and how horribly Mortarian was betrayed. That model reflects that pain.
@MrStatistx
3 жыл бұрын
Kitbashing plastic with plastic is so much more enjoyable. Sadly most of the time I end up doing plastic and resin too. Also made the milliput != glue mistake once. The other mistake was trying to glue the plastic part to the resin part, while there was still not fully cured milliput on there, which led to everything coming off again, which is funny, since it worked for you there.
@statesrights01
3 жыл бұрын
a few years back, I got the idea skeleton kit for war hammer.. the musician in it was nothing more than some skeleton blowing a horn.. so I grabbed some pieces and some green stuff and made my skeleton playing the Highland Bagpipes.. and at the base I put an skeleton arm holding up a rusty sword. *it's said that the Pipes can cause a dying man to get up and fight.. * so I read so where.. Love your work man... Thanks and God Bless
@chrishughes8102
3 жыл бұрын
Love 'the drip' ('gush' maybe??), I know you said you didn't have fishing wire, but I have found running the UV resin down it after its fixed in place creates a super effective drip, painted with contrast afterwards... good when you don't want something so wide :)
@perrygrosshans8537
3 жыл бұрын
Sweet mother of Nurgle! That turned out amazing! That's like Miscast Terrain astounding level!! Yeah, be proud of that for sure!! The leaky pipe is next level, btw.
@Matt-md5yt
3 жыл бұрын
glad you done some Kitbashing and made a awesome take on a Helbrute
@hyfryd6677
3 жыл бұрын
I tottally agree with you on the Hellbrute looking derpy, I play Black Legion and I've swapped it out for a converted Dreadnought instead
@JohnnyTrash87
3 жыл бұрын
Great approach to the hobby. I do exactly the same: Looks over meta... If I die, I will die well dressed!
@samsolopeeps
3 жыл бұрын
Love it. I did a Hellbrute too and kinda love making slightly gawky looking models better
@RotGolem
3 жыл бұрын
Disgustingly beautiful conversion and paintjob. The army as a whole looks great. Papa Nurgle is proud.
@guadalupemunoz1767
3 жыл бұрын
Sick dude my buddy is building a deathguard army can’t wait to show him this
@myleshanson42
3 жыл бұрын
The drip literally made me gag when I saw you putting it on. Nice work, you got the effect you wanted!
@frekkiskjalt5316
3 жыл бұрын
Great conversion. I love Nurgle miniatures. They are great fun to build and they look simply awesome.
@TripleXclown
3 жыл бұрын
GW would be proud of this Brutes Quality! One of the best Kit Bashes I've seen.. Plus Bishop with a Turtle Neck... Hat is epic..
@BlackMagicCraftOfficial
3 жыл бұрын
Waiting for my cease and desist letter for GW....
@riverdelavidawilliams9624
3 жыл бұрын
Warhammer has always been more about the art than the game, it’s creative moments like this that keep 40k alive and growing. Personally I haven’t played a 40k game using GW’s stock rules since 5th edition in 2010 only homebrew for me 😳😂
@deadswordsman
3 жыл бұрын
Great looking Hellbrute. Dripping effect worked out great.
@jimmyhassett3179
3 жыл бұрын
Your sloppity bilepiper looks awesome man, the paint job is amazing
@Berserkerworks
3 жыл бұрын
Screw the Codex, build cool models, is my favorite way to play Warhammer.
@vthunder4238
3 жыл бұрын
Honestly same I honestly haven’t played a torny in forever casual is just so much more fun
@valbourne1797
3 жыл бұрын
Plague pope is an infectious concept that is festering in my mind. Thanks!
@nowthisnamestaken
3 жыл бұрын
Lets just go ahead and like this video during the opening commercial. Saves time
@FacilityD20
3 жыл бұрын
Haha, as a small channel, I be smashing that button for everyone now.
@deleterinserepeat2079
3 жыл бұрын
This really is phenomenal. The tube liquid just blow me away when I watch this video again. It’s little tips like that that make me rewatch videos for inspiration!
@nobodyimportant5417
3 жыл бұрын
Love the conversion. However... you take back what you said about stumpy robot legs! Dreads are my favorite models to build and paint. I imagine them as human-scale, about chest high, stomping around on legs like a corgi. That would be a conversion I would do if I was a better modeler, corgi dreads!
@Vorpal_Wit
3 жыл бұрын
Great vid! The army is looking great/ I totally respect your view of lists. I too think lists often get in the way of building the army I wanted in the first place - sometimes robbing you of the enthusiasm you had going into the project. I have have even had projjects that I was really excited to build and then having played a game with them, suddenly found myself wanting to build something else. SO my rule is build what you want, and then if you still want to play, build and army out of what you have. Cant wait to saee more!
@maxbrandt6
3 жыл бұрын
Excellent work, you took a fairly goofy looking model and made it fit perfect within your gross Nurgle gang! It's a massive improvement over something that looked like a cast-off from Doom.
@jasont1430
3 жыл бұрын
Just starting my own death guard army.... funny i have a ton of the old minis... just used them for a Chaos undivided army... REALLY LOVING ALL THE NEW MINIS AND RULES...
@MrJonboy002
3 жыл бұрын
That is exactly what the original kit SHOULD look like, Warp twisted dread! Perfect.
@thebestofesss1
3 жыл бұрын
That's so awesome. I'd love to see you do an ork conversion!
@parsleytaylor8361
3 жыл бұрын
and the great thing is that the cobbled together feel just makes it more nurgle-y
@markfergerson2145
3 жыл бұрын
Clear sprue can be stretched just like opaque sprue to replace fishing line or whatever with curves in place or as straight pieces. Also, you can carve clear crystals out of it per your previous video about Tiny Things.
@BlackMagicCraftOfficial
3 жыл бұрын
Totally, I've seen that done, seems to work great.....but I definitely don't have any clear sprues lying around.
@markfergerson2145
3 жыл бұрын
@@BlackMagicCraftOfficial When the lockdown situation eases, trade bits with other crafterrs. Easy peasy-ish. Maybe by snail mail?
@ArtJeremiah
3 жыл бұрын
WAAAYYY better than the original hellbrute model. Luckily it wasn't the old pewter version, that was even more annoying. Fantastic job as always. I'm really loving your army.
@VAB0L0
3 жыл бұрын
From derpy dreadnought to WRETCHED helbrute, hell yeah!
@druidgamer9735
3 жыл бұрын
Really nice result. Whenever I was building a model with a lot of "empty space" inside, I would build it around a core of modeling clay. I gives you something to glue the pieces onto as well as adding some weight to the final piece. Not sure if that would have helped you here or if you'll ever have a similar hollow multi-piece model to build again but who knows?
@weatherthis8062
3 жыл бұрын
Seriously loving your journey into 40k mate, nice and chilled best way to approach it. Keep up the awesome content 👍.
@andytate5670
3 жыл бұрын
I love kit bashing it's one of my favourite things to do this is pretty much a perfect example and why I love it
@mintymoore6054
3 жыл бұрын
Bloody amazing. Love your nurgle army and paint scheme
@TheCrystalHive
3 жыл бұрын
When removing supports from your prints, try: 1) Remove from plate 2) Wash 3) Soak in hot tap water for about 1 minute 4) Break pinch and gently remove the supports from the model, they'll pop right off! No need for sawing with your knives :).
@BlackMagicCraftOfficial
3 жыл бұрын
When printing minis I always use the warm water bath (shown in many other of my videos). But this leaves you with resin contaminated water you need to let cure before disposing. So for something like a base where it doesn't matter it's more practical to not bother.
@johncware66
3 жыл бұрын
I love your approach to building what you think looks cool.
@mendee7398
3 жыл бұрын
This is awesome! I recently used some of the tips you've given on this channel and created a nurgle-fied Stormcast eternal. I think he looks awesome. I never would have been able to do this without you, so thank you so much!
@besjungebesjing9692
3 жыл бұрын
loved the pipe with the goo, looked very realistic!
@shannybug666
3 жыл бұрын
Thank you for having a Warhammer army for the cool minis rather than just the hard-core powers. My Age of Sigmar Nighthaunt army is a similar situation. I picked my pieces just by how cool they looked, not because of the powers. I only play casually with my Husband, daughter, and son in law, so we play fast and loose and just for fun!
@DarkMatterWorkshop
3 жыл бұрын
That yellow/black scheme is 🔥 And great tips👌
@lyndilou6314
3 жыл бұрын
As a fellow disciple of Nurgle your painting style is awesome and inspirational! Thank you for sharing it with us.
@adamdax
3 жыл бұрын
Amazing job everything just seems to work so well
@johnsm3568
3 жыл бұрын
Magic Sculpt. It's a tad expensive but for this kind of work it's perfect. You can sculpt the bulk and then 15-20 minutes later it's solid and resilient.
@Mon22king
3 жыл бұрын
Here is a challenge for you; How would you go about building a Chaos Ork Nurgle army?
@dieseluterus3632
3 жыл бұрын
I really appreciate your dedication to proper PPE and educating others to follow as well
@MS-zo8tp
3 жыл бұрын
I'm the same when it comes to warhammer/age of sigmar. I want to paint the models that I think look the nicest, and the gameplay will always be second to me. Sure, I try to stick to one faction so I can theoretically eventually field an army but that doesn't mean I'm going to buckle down and buy a bunch of the ones I don't like - genestealers, I hate them, but love the bigger Tyranids so I guess I'll never have a viable army - but my big angry alien bugs will look cool and bring me joy to paint, and I like how a group of them look together. Maybe it doesn't satisfy someone else, but it satisfies me and it's my money and my time!
@NerdCraftHQ
3 жыл бұрын
This one is so good! You made this model 100x cooler for sure. -- Also, that 'chaos bomb' was really nice of you. Thank you for that!
@trattogatto
3 жыл бұрын
Your Nurgle creature is amazing. But I see you have some problems using Milliput. If you learn a bit more about the features of that stuff you will do much better. 1. It is workable for about 20-30 minutes, then it starts to harden and be less sticky, let it alone overnight. You need to plan more steps in a big project, don't try to do the full work in the same day. Better to have a solid thing to continue, and remember that you can use sandpaper, crafting knife, and sculping tools to sculpt and adjust anything you did with Milliput. 2. When you use it, it is sticky when it is dry, and it is not when it is moist. Use this at your vantage, water on your tools, roller, or fingers, so you can work better, and with a drop of water you can smooth the surface too. 3. Instead of cutting resin miniatures, you could use Oyumaru to make a mold (it is a thing that you put in hot water 100° C for 2-3 minutes, then it is soft for some other 2-3 minutes, and then it hardens. You can repeat this all times you want). Having a mold you can cast your copy with Milliput (not sure if Oyumaru resist to resin or other chemical stuffs, but Milliput is tested by me and approved).
@Xf2tygr
3 жыл бұрын
This pleases Papa Nurgle. Great job, what an incredible kit bash👍👍👍
@1525kat
3 жыл бұрын
Happiest of Birthdays sir! Hope today is filled with joy and hugs and that your upcoming winter in the 'way up north' is mild (as I say that from sunny warm California LOL)
@Alberto-hs9pi
3 жыл бұрын
I can`t help but love this Hellbrute, it`s really amazing, really, really amazing. The tip with the drip was great too!!! I will give it a try in the near future with my own nurgle models. I have to say that your army is incredible and looks way better than most things "pro painted" i have seen while looking at nurgle models. The conversión work really pulls it off and they all are just beautifull.
@evelynlamoy8483
3 жыл бұрын
Hey, It's a different scale than you usually work in, but I think it could be really fun if you did a video, or series of videos customizing a Mcfarlane toys primaris figure. Nobody is going to want to customize say, one of the Bandai figures since they cost so much, but the Mcfarlane ones are a steel. You could grunge it up, sculpt onto it with green stuff Make a chaos Primaris, since a few squads here and there have already turned to chaos. Give you a chance to paint something in your Nurgle faction color scheme but on a larger scale figure
@BJKasowski
2 жыл бұрын
WOW! Amazing job! Looks much better than orginal!!
@tyronewhite918
3 жыл бұрын
I was very skeptical at first, but the final product looked amazing!
@ScratchBashing
3 жыл бұрын
This guy is really amazing - the plastic strip as a "drip armature" 🤮 was a stroke of genius!
@noxington4260
3 жыл бұрын
That sleeve is finally getting filled in I see! Looking sweet 💪
@BlackMagicCraftOfficial
3 жыл бұрын
You must have missed a few videos :P Was going to be final session next week, but new covid shut downs mean reschedule to March.
@scottbrotherwood
3 жыл бұрын
The army is looking good that hellbrute is amazing
@ArdWulf
3 жыл бұрын
That has entered among my top 7 favorite conversion pieces brought to excellence (as in 4th among some of the pros) by a more than reputable paint job. SaaaaWeeeet!! Cheers man...keep up the quality
@canisrex5142
Жыл бұрын
Wow! Absolutely awesome conversion!
@kevinkiehn826
3 жыл бұрын
I absolutely LOVE this conversion. Great work bud! Sincerely, your fan from Alberta. 😊
@vidya_gaming_dad
3 жыл бұрын
About the base, or resin printing in general. If you soak your print in hot water for a bit, you can peel the supports off much easier, and probably wont need that knife.
@BlackMagicCraftOfficial
3 жыл бұрын
I know :) I do this with minis (and have done so in a few vids). It works great but then you are left with contaminated water you need to let cure in UV light before you can safely dispose. So for something like the base where the supports are not in visible locations it's not worth the hassle. I also placed pretty hefty supports on the base because it was big and heavy, and wouldn't be on any visible surfaces.
@vidya_gaming_dad
3 жыл бұрын
@@BlackMagicCraftOfficial that makes sense, thanks for the response.
@BlackMagicCraftOfficial
3 жыл бұрын
That being said, warm water support removal is probably the single best bit of advice you can give someone new to resin printing. It’s a game changer.
@RauMins
3 жыл бұрын
After seeing this awesomeness, I do hope to see you kitbash some Nurgle themed Obliterators ♥
@KnightFlesh
3 жыл бұрын
Quickly entering "Black Metal Craft". Great video buddy, love the content
@somnitek
3 жыл бұрын
"I think it's derpy and .... " I know, bro. It's ok. You really like fantasy, right? That might explain why.. Just messin' wit you. =p As always, you do really outstanding work with every video! Keep it up! :) Edit: I really like the idea you did with the vacuum. It reminds me of a clandestine listening probe manual I read a long time ago where they talk about combining a drill and a vacuum tube + vacuum to suck up the dust that drilling into the wall would normally produce and I was like "holy shitzu! that's so clever, I have to have one! or build one! or... that's so cool!!!" I never did get around to making one, though. Don't really need to use the probe microphone in clandestine applications anyway as much but for some reason watching you do your thing with the vacuum made me think of that!!!
@DruryHall
3 жыл бұрын
That looks nothing like what you started with! Freaking awesome!
@GlittervoidGamecraft
3 жыл бұрын
The strip of plastic armature is a great idea. I literally just skipped a pouring effect on a fountain terrain piece because I didn’t have fishing line. 😆 Oh well, next time!
@BlackMagicCraftOfficial
3 жыл бұрын
You can always go back and add it :D
@jamesperry9197
3 жыл бұрын
I actually like the hellbrute kit but you stepped this one up. That pipe and the resin look fantastic!
@charleyedwards2121
3 жыл бұрын
So frickin cool i look forward to joining you in the painting/ crafting youtube space :) all your base.. base. base.
@anonhannn
3 жыл бұрын
Can I just say, your Intros and Thumbnails are just amazing these days. They keep getting better and better!
@BlackMagicCraftOfficial
3 жыл бұрын
Thanks! I try!
@anonhannn
3 жыл бұрын
They feel really solid and professional, with really good cuts and transitions 👌.
@HLSnake
3 жыл бұрын
Show of hands (or thumbs up), after watching this video who wants to see BMC do a tank!
@chrxunleashed7654
3 жыл бұрын
That would be great
@nekrataali
3 жыл бұрын
I'd love to see him do a historical tank or even a ruined tank as terrain.
@Zeropointreticulant
3 жыл бұрын
I love the style you're choosing looks very biopunk
Пікірлер: 457