So, yes, the math is right.
Enjoy!
Tooling
Using a HaasTooling 16mm 3fl DLC Endmill & SK40 Hydraulic holder from Shunk
Endmill : www.haascnc.co...
F&S
DOC : 26mm ≈ 1.02 in
WOC : 9,5mm ≈ 0.374 in
RPM : 8400 RPM
Feed Rate: 4680 mm/min ≈ 184 inches/min
Chipload: 0.185 mm ≈ 0.0073 inches
Material Removal Rate (MRR): 1156 cm³ ≈ 70,5 in³
Spindle Load: Absolutely floored at 180-185%.
The second cut is at 4875 mm/min ≈ 192 inches/min.
As you can hear it bogs the spindle down a fair bit. I would not recommend running that cut.
Machine
Haas Super Mini Mill 2 - 2019
Негізгі бет 1204 cm³ ≈ 73,5 in³ MRR on a MINI MILL?! | INSANE HEAVY CUT
Пікірлер: 16