Looking good dude, will be good to see how you do the plumbing. Iv started to paint my stand white and the new tank and sump should be with me the end of next month.
@TheCoralReefTalk
3 жыл бұрын
Thanks man, that's great your build is looking awesome as well can't wait to see your progress.
@areyouarobotz
3 жыл бұрын
So much work
@alyssav3486
3 жыл бұрын
Ohhhh yeaaaa build that fish tank
@Beelzhere
Жыл бұрын
Good video. What type of sand grit paper did you use ? Awesome job!
@TheCoralReefTalk
Жыл бұрын
Thank you so much, I used 80 and 120 grit
@jairojavier6350
Жыл бұрын
shop vacuum to get the rest of the water out!!
@trinca5826
Жыл бұрын
Did u ever post a video of when u added the doors onto the diy stand
@TheCoralReefTalk
Жыл бұрын
You're right, I didn't post one about that yet. I will definitely work on putting that together and adding it to the playlist. Thank you so much for asking.
@alyssarodriguez5393
Жыл бұрын
Question! Did you seal the wood with something to waterproof it
@TheCoralReefTalk
Жыл бұрын
Thanks for the question. I used a stain and then two coats of paint. If you wanted to add a deck sealant you could. Thanks for checking out the video.
@Itz2Salty
3 жыл бұрын
How long was shipping on the the tank? I'm still waiting for delivery.
@TheCoralReefTalk
3 жыл бұрын
I will have to look back and see. But I will let you know.
@Donny809
2 жыл бұрын
Wet dry vacuum.
@venomnight
2 жыл бұрын
. Hi question I'm getting a tank from local pet store that has a black frame on bottom do I still use the plywood on top of stand ?
@TheCoralReefTalk
2 жыл бұрын
Great question. If you have a glass tank and have the plastic frame that helps brace and support the tank on the top and bottom then you could do a more simple finish where the tank rest along the perimeter of the stand. However I would use the plywood to have a solid sturdy surface for the tank to sit on.
@Reefphreak
Жыл бұрын
@@TheCoralReefTalk From what I understand, you only use the leveling mat with a frameless aquarium but the plywood top is great to help provide an even and level surface for the frame to sit on.
@hanserflorentino7462
2 жыл бұрын
What size off plywood did you use for front and side
@TheCoralReefTalk
2 жыл бұрын
I used quarter inch plywood. Thanks for reaching out. Are you currently working on an Aquarium Stand?
@hanserflorentino7462
2 жыл бұрын
Yes working on 120 gallon first part is finish but having a problem with the door is the first time making a stand
@TheCoralReefTalk
2 жыл бұрын
@@hanserflorentino7462 Very nice. For the doors I used the concealed cabinet hinges, there is a special bit that drills the right size hole for the hinge. The construction of the doors are pieces of the one by that I used for the top and bottom lip. They were grooved and connected to a piece of plywood.
@TheCoralReefTalk
2 жыл бұрын
@@hanserflorentino7462 you can also simplify the doors by just using plywood and cutting them to the size you need and using a piece thick enough to be flush with the top and bottom lip. How has the building process been so far?
Пікірлер: 26