Trailer is looking great Red, nice printed stacks!!
@Reds_Scrapyard
Ай бұрын
Thanks, Tom. Hopefully they still look good after a little paint
@hortonshotrodshop2003
Ай бұрын
Nice to see some one printing some cool injection stacks
@Reds_Scrapyard
Ай бұрын
I thought they turned out decent. I haven't used a set yet though
@ericsmodelgarage
Ай бұрын
Nice work on the trailers, Red!👍
@Reds_Scrapyard
Ай бұрын
Thanks, Eric, glad you like it
@ModelCarMinion
Ай бұрын
Those small scale 3D printed parts look amazing, nicely done, I like the 1/64 scale model car.
@Reds_Scrapyard
Ай бұрын
Thanks, I just wish the Willys had printed out better. I'm sure it will next time though
@dustymojave
Ай бұрын
Working now. Different time of upload. But it's fixed now. Friend of mine has an old landing mat trailer. Single axle no springs. His dad built it in the 50s for his model A and Deuce. My friend used it for his desert buggy for years. Still gets used for all sorts of cars.
@Reds_Scrapyard
Ай бұрын
I reuploaded. The battery on my mic died twice so I ended up shooting the video 3 times that thing should last near forever as long as you remember to service the bearings
@dacuzzz6951
Ай бұрын
hello Red....the trailer looks fine & your stacks look great..thx 4 sharing.. vinny
@Reds_Scrapyard
Ай бұрын
Thanks, I appreciate you watching.
@Bruces-Eclectic-World
Ай бұрын
Wow the trailer is cool and looks great for the car. Yep! 3D stuff is fun and time consuming for sure. I had to turn mine off and get back to modeling... Lol It is such a rabbit hole... 😁 Take care my friend! LLAP 🖖
@Reds_Scrapyard
Ай бұрын
Thanks, Bruce, you too.
@Bubbasmodelcarshop
Ай бұрын
cool stuff red. 3d printing is awesome. if i could afford to get one i would be printing wheels / tires / engines for my builds. lol. Thanks for sharing sir.
@Reds_Scrapyard
Ай бұрын
Anytime, always happy to share. Thanks for watching
@nicholasbcleghorn8008
Ай бұрын
Awesome idea. 🏁
@Reds_Scrapyard
Ай бұрын
Thank you.
@JimbosModelkits-w2t
Ай бұрын
Cool little trailer. You did a good Job on it..
@Reds_Scrapyard
Ай бұрын
Thank you. Jimbo. It still needs a few things. I only painted it so I could see what it looks like lol. I want to put a well weathered set of 16" artillery wheels with wide whitewalls.
@sambaldwin3730
Ай бұрын
Nice trailer. good work on the 3d printed items. Thanks for sharing
@Reds_Scrapyard
Ай бұрын
Thanks for watching!
@kyledehartsscaleworks
Ай бұрын
Super cool trailer there Red!! That’s awesome. And I love that little Willy’s. Neat stuff
@Reds_Scrapyard
Ай бұрын
Thanks, Kyle. I'm going to try printing the Willys again, I have a file for a '39 Willys as well
@kyledehartsscaleworks
Ай бұрын
@@Reds_Scrapyard sweet! I hope to see one of them painted and built up! So many cool things you guys can do with the printers.
@HotrodzModelShop465
Ай бұрын
Cool trailer Red, the stacks looks good also.👍
@Reds_Scrapyard
Ай бұрын
Thanks, glad you like it
@1968fordman
Ай бұрын
Trailer looks great and nice looking 3d printed stacks👍
@Reds_Scrapyard
Ай бұрын
Thanks, I think the stacks will work out ok. They will still be a pain in the ass to install though lol
@user-xk3vk6dz8m
Ай бұрын
Always good to hear from you.
@Reds_Scrapyard
Ай бұрын
You too, Possu. How are you guys doing? is Gnatty regional arm wrestling champ yet?
@dvdw_graphics_crafts
21 күн бұрын
Trailer kits are hard to come by; I'd buy a car kit just for the trailer that comes with it. XD
@Reds_Scrapyard
21 күн бұрын
I've done the same thing myself
@WrOnGwAyScALeMoDeLs
Ай бұрын
Let there be sound I agree with Tom the small trailer is KkOoL
@Reds_Scrapyard
Ай бұрын
Yeah the big "pro" trailers just swallow theses little guys up.
@WrOnGwAyScALeMoDeLs
Ай бұрын
@@Reds_Scrapyard 😀
@AmateurScaleModelBuildi-lj3so
Ай бұрын
Trailer looks great, Red!
@Reds_Scrapyard
Ай бұрын
Thanks, I appreciate it.
@marsgarage8217
Ай бұрын
Cool stuff.👍
@Reds_Scrapyard
Ай бұрын
Thanks 👍
@scooterdoughmas3012
Ай бұрын
good stuff Red i bet the 1/64 gasser would be bad to the bone on a slotcar track😁🤩scooter😎ps lookin forward to the altered😅
@Reds_Scrapyard
Ай бұрын
I was really just goofing around, printing it at 1/64. If I can get a decent print I'll build it though. Maybe I should look for a hot wheels chassis that would fit. That's the blue AA/A T roadster last seen in episode 110. I'll finish it eventually. The brake drums I printed for it look pretty good. So, progress?
@davidchin350
Ай бұрын
Nice looking trailer, great job👍
@Reds_Scrapyard
Ай бұрын
Thanks, David. I appreciate it
@GoadModelCars
Ай бұрын
Did you ever get my shop card in the mail
@Reds_Scrapyard
Ай бұрын
I did get it. I thought I did a shout out in this video but it looks like I skipped it during the last reshoot. Sorry about that Jaxon. I'll get one up soon
@GoadModelCars
Ай бұрын
@@Reds_Scrapyard you are fine
@GoadModelCars
Ай бұрын
You should start a reisn store I will Promote the product
@Reds_Scrapyard
Ай бұрын
There is a lot more involved than just printing stuff out and making sales. Licensing for one. I didn't create any of the files I print, and the usual license doesn't allow you to sell the prints. Besides, doing that would take all the fun out of it, by making it a job instead of a hobby.
Пікірлер: 50