Ok, since no one mentioned it in the comments, I guess I will... The Allen wrench is for an emergency situation where the jack will not go down electrically using the button, as some of these jacks tend to do at times. There is a hole under-neath the handle with a rubber cap over it. Take the rubber cap off, and insert the Allen wrench into the Allen key and turn counter-clockwise to lower the jack manually (just like a bottle jack works). I am sure that information is in the manual, but thought I would mention it here for others having issues with the jack not retracting by pushing the down button. Actually I would like to think that using the Allen wrench to lower the jack manually every time you use it, would extend the life of the jack since it wouldn't be working as much. VIW3784 mentioned that the Allen wrench may be for the plate on bottom, and I was thinking also that if you took off that plate, you may be able to service the jack, and may help with (as other people have said) loosing fluid/leaking to have access to a place to fill it up or change the hydraulic fluid from time to time...
@gillywash1487
2 жыл бұрын
Know when a video transports you back to a certain point in your life… Do you remember being a kid and watching the demonstrations that used to be on repeat on a JML TV in ASDA. Thanks for unlocking that childhood memory for me this morning 😂
@SpeckyMcSporran
2 жыл бұрын
Was it really that cheesy? 🤣
@gillywash1487
2 жыл бұрын
@@SpeckyMcSporran was a good audition, never know could get a job on shopping channels next 📺
@matthewfunk4969
Жыл бұрын
Thanks for the review, looks like a great emergency kit. Anyone who’s had to fight a factory crap scissor jack and wrench in the snow or mud at night probably already has one of these on the way. And if your used car doesn’t have spare tools, like so many don’t…
@Chiving
2 күн бұрын
Super smooth video, thanks for the info and greetings from Mexico!
@PaulDoldenDetails
2 жыл бұрын
Certainly aimed at my favourite people OLD people as long as the sockets are guaranteed it could be a useful tool 👍🏻
@johnbrown3951
2 жыл бұрын
Good to see you putting out content it seems to me it's been a while. I don't need all the kit as I have breakdown on my cars (not that i would call them out for a flat tyre) and a breaker bar and battery powered impact wrench but it pinged an interest in a powered jack but my trolley jack is probably quicker. Interesting film though. Watched this before heading up to your neck of the woods, Setting up sons flat for Uni in Aberdeen.
@sixtysecondsofstephens2386
2 жыл бұрын
Well presented specky, was like watching a shopping channel.
@SpeckyMcSporran
2 жыл бұрын
Haha that wasn't the plan but I'm glad you liked it.
@p8rdm
2 жыл бұрын
Handy bit of kit to have In your car for those emergencies, surprised of the weight it will lift, good price too 👍
@SpeckyMcSporran
2 жыл бұрын
Cheers Ricky, I was pleasantly surprised at how well it all works!
@alexandermorris8420
3 ай бұрын
I have an 12v Scissor jack and it works well. Much easier than a manual jack.
@adrianlawrence7224
Жыл бұрын
Very surprised with how solid this machine appears to be. I could easily imagine my wheels being removed for cleaning much more often using this. Good price too. Thanks for being it to my attention. However, I never envisaged needing a video to help me locate, loosen and tighten my nuts.
@stevenjones19-m8i
2 жыл бұрын
Hello Specky,what a brilliant video, this hydraulic jack is a handy bit of kit,I do like the new alloy wheels on the car.😀
@SpeckyMcSporran
2 жыл бұрын
Thank you!
@paultaylor9652
2 жыл бұрын
Lovely Jubbly, very handy bit of kit Scottie.
@Bombastic_Spastic
2 жыл бұрын
Im amazed that cake mixer managed to move those wheel nuts at all.
@SpeckyMcSporran
2 жыл бұрын
It did a great job considering I pretty much overtightened the nuts previously.
@gillywash1487
2 жыл бұрын
It does look like a cake mixer 😂 I imagine you turning up with a proper impact driver talking like Ronnie Kray- ‘What are you, Fanny Craddock? What are you doing with that? Gonna bake me a cake? Sing me a song whilst I blow out me fucking candles? I come here for a fucking shootout. A proper shootout with some proper men. Like Colonel Custer and Geronimo, you ever heard of them? No. Cause you're too busy in your pinny baking fucking fairy cakes, weren't ya?’
@SpeckyMcSporran
2 жыл бұрын
I love that scene 🤣
@VIW3784
2 жыл бұрын
Good descriptive video, assume the Allen key is for the metal plate on the bottom. Handy bit of kit, change your wheels and then head to the local snooker club with those fancy gloves 🧤
@SpeckyMcSporran
2 жыл бұрын
Haha didn't think of that or the gloves, but a handy kit to have.
@williamdwallace6538
2 жыл бұрын
Looks a decent bit o kit that Specky good value for the money 👍🚙
@everydaydetailing6449
2 жыл бұрын
Most important question is can it lift a mobility scooter? if so I can see this being a big hit with pit crews for the Mersea Island mobility scooter co-op 500 race! Rumour has it that this years race is being started by Sammy the seal! and is sponsored by "waffle stomping fired chicken"
@SpeckyMcSporran
2 жыл бұрын
So many podcast references! 🤣🤣
@1stfrompuertorico568
2 жыл бұрын
8th 6 a.m. here just woke up Wonderful product!👌👌👌💪👍
@naveedkanji1
Жыл бұрын
cant you over torque the lug nut if you only need maybe 80 ft/lb? won't that ruin the lug nut?
@pobskyline3
2 жыл бұрын
1/4 inch seems quite small for an impact drive. Are you sure it's not 1/2 inch? Most that I've seen or used impact-wise in my Automotive career have been a standard 1/2 inch or upwards. Maybe once I saw a 3/8 drive impact tool, but rare to see. Be nice for official clarification as not mentioned on the link, unless I'm blind, cheers. Not a bad price either and a handy bit of kit too. Especially for mobile valeting businesses.
@darrenburchmore
2 жыл бұрын
Definitely 1/2" on this but there are plenty of 3/8" impact tools around now. I've got a few myself
@wonderwalls3565
Жыл бұрын
Does the manual says to not let the jack under load for more than 10 minutes?
@grahamgroom195
2 жыл бұрын
Can you confirm that it is 1/4 inch drive as it looks more like 1/2 inch..
@SpeckyMcSporran
7 ай бұрын
I think I misspoke, it's a ½"
@michaelkendall5332
Жыл бұрын
Can anyone say how to fix the jack when it begins to leak oil through the riser. How do i stop the leak, what oil do i purchase to replace the lost amount and what is the maximum amount
@darrenburchmore
2 жыл бұрын
First off, street ka wheels. Secondly those sockets aren't suitable for an "impact" tool. They should have just included a breaker bar instead. Cheaper and more efficient judging by how long it took to do the first wheel nut. Especially as your wheels would have been off recently. Also 1/2" drive
@SpeckyMcSporran
2 жыл бұрын
My bad, must have misread the size 🤦🏻♂️
@checkmateclamp7318
Жыл бұрын
How do I use the battery cable connectors?
@johnirby493
Жыл бұрын
How are you supposed to get in the trunk to get the hammer to break glass and cut seatbelt, so you can get out?
@SpeckyMcSporran
Жыл бұрын
Perhaps this one is to help rescue others rather than yourself. Of course you could always take the tool out of the box and keep it somewhere closer to the driver.
@michaelp1758
Жыл бұрын
WARNING!!! this jack and all similar ones are all falsely rated. they CANNOT lift 5 tons..(some say 3 tons) other videos on here show max lifting capacity is about 3900 lbs (less than 2 tons) beware these are marketed under several different names. they can hold 5 tons if you use it as a jack stand but stall out trying to lift closer to 2 tons. see user project farm for actual load testing
@SpeckyMcSporran
Жыл бұрын
Good to know!
@SPRODETAILING
2 жыл бұрын
Thanks for video
@allansplaw2469
Жыл бұрын
Work for expedition or suburban?? How much they cost..!??
@SpeckyMcSporran
Жыл бұрын
I don't know, we don't have those cars in this country.
@chrisforde964
2 жыл бұрын
Great video 👍🏻
@eldoc770
Жыл бұрын
Hello my friend, which model is where you bought it
@SpeckyMcSporran
Жыл бұрын
There is a link in the description
@fatalmeans2940
Жыл бұрын
How tall is it. Remember if u have a flat the car is a lot lower. It seems kinda tall to fit under the car. Especially if it's a uneven surface. ?????
@guitarbytes
2 жыл бұрын
Price has jumped £30 in the past month! Pity, as it would be ideal for people like me who live in top floor flats and don't have anywhere to store a trolley jack.
@SpeckyMcSporran
2 жыл бұрын
That's Real shame, sorry to hear that.
@Outdoor-Adventures
Жыл бұрын
my only concern is that, what happen if the motor stop working? the jack is useless.
@SpeckyMcSporran
Жыл бұрын
What happens if the handle on your manual jack breaks? We can't live by what-ifs.
@Outdoor-Adventures
Жыл бұрын
@@SpeckyMcSporran I think we are talking two different scenarios here, the electric jack is totally depending on the motor where the manual jack is using a handle, that can be substitute with another handle?
@SpeckyMcSporran
Жыл бұрын
I can't argue with that but I don't think it's enough to put someone off buying one.
@HenryPratt-ck2fr
Жыл бұрын
Can you direct to the manufacturer
@glosjdm
2 жыл бұрын
I can see it has one downside, It's Limited to stock suspension ride height. You won't get it under a lowered car.
@SpeckyMcSporran
2 жыл бұрын
True, but I don't think those with lowered cars would consider something like this either.
@glosjdm
2 жыл бұрын
@@SpeckyMcSporran Fair point. Just to clarify I wasn't trying to be negative
@SpeckyMcSporran
2 жыл бұрын
Yeah no worries bud 👌🏻
@jigneshprajapati8905
6 ай бұрын
Price
@prakashm5549
Жыл бұрын
Hi Boss super super
@SpeckyMcSporran
Жыл бұрын
Thank you so much
@mntungoyisentombela1342
Жыл бұрын
I am ìmprest to your product what more can ì do
@ManNomad
Жыл бұрын
It is not 1/4" drive it is 1?2"
@sayedabbas96
Жыл бұрын
متوفر الان
@HenryPratt-ck2fr
Жыл бұрын
Can you supply me to buy about 100 quantity
@SpeckyMcSporran
Жыл бұрын
No
@davidjohnston7512
Жыл бұрын
Air pump?Commonly referred to as an air compressor.
@deficator750
Жыл бұрын
Another paid shill, ever wonder why he never showed it to us with an actual flat tyre? its because the damn thing does'nt fit under a car when it has a flat tyre. Thats why when he showed the preview of the lift it was already halfway lifted. This product is a bunch of baloney thats why we stopped selling it in our store.
Пікірлер: 69