Disclaimer: This video is in no way meant to be taken as a professional video or recommendation. Do not attempt anything depicted or shown in this video unless you know what you're doing. I do not take any responsibility for anything that results from you using the information in this video.
This video will cover the general basics of how to enable the Radio Aux or "Line In" function of the 2013-2019 Ford Police Interceptor Sedan vehicles including the wiring and programming of the FCDIM module.
If you would like a more in depth video on this process, let me know in the comment section below.
Links:
Aux Wiring Harness (I used this one because it came with the pins I needed, was next day delivery from amazon and was super cheap. Only drawback is you have to take the pins out of the white connector. I used a small zip-tie to do that but you may have a tool or other solution)
rb.gy/pd2ht
Another version of the wiring harness from another company with the correct pins and no plastic connector:
rb.gy/dfpg8
NOTE: On both versions of the wire harness, the lone black wire is the wiring diagram's blue wire. The red and black combined wire is the red wire, the white and yellow wires are their respective colors.
Wiring Diagram: t.ly/8csWW
OBD-LinkEX Adapter: rb.gy/b04jz
Forscan Program: rb.gy/zjaqa
Original video of Aux Enable using forscan: rb.gy/qkcky
Негізгі бет Автокөліктер мен көлік құралдары 13-19 Ford Interceptor Sedan Radio Aux-Enable
Пікірлер: 27