Wow buddy you save my weekend lol, i just updated my apex to apex encore and forgot alll my settings, no backup…. I tried yours on the 14900k and it works like a charm on ddr5 8000. Thank you so very much
@razor19906
Жыл бұрын
that aint not desktop pc thats a facility lol
@razor9930
6 ай бұрын
Damn bro at 10:05 that coil whine....OUCH!!!
@mardon85
7 ай бұрын
"nothing special just an SP104 13900KS"... Erm that's the definition of special 😂
@DeltaParadoxLLC
3 ай бұрын
Those are my exact specs too. Nice build
@Pinkfloyd1173
Жыл бұрын
Sounds like a harrier jet about to take off, lol,lol.
@videocardzrule354
Жыл бұрын
Or a mini refrigerator.
@Pinkfloyd1173
Жыл бұрын
@@videocardzrule354 Great vid, was just being sarcastic man.
@outlet6989
Жыл бұрын
Loved and learned many points from your video. Questions: Was that sizeable, white-colored device an AIO type of cooler? If it is, I've never seen one. Would have liked to see it listed in your Show more. I'd like to see a video showing its installation and setup. Do the letters KS mean your CPU has intergraded video? How do you turn/disable it? BIOS setting?
@tufpistol
Жыл бұрын
That is a water chiller.
@TechDoneRight1
Жыл бұрын
when is that water block coming for those sticks! lol. Enjoying the content sir!
@GaijinGamerGirl
5 ай бұрын
Do NOT update to BIOS version 2002 if running a Z790 Apex and 13900K. Your frequency will drop below 5ghz under load, as low as 2ghz regardless of what you set in the BIOS.
@tommy-z6i
5 ай бұрын
nice
@Deltatwo3
Жыл бұрын
You could get those ram voltages down. I leave my ram @7200 with a 5.8 all core and a 200 cooler score.
@videocardzrule354
Жыл бұрын
I am running DDR5 8000 (2x24GB) in the video with 1.350V VDD/VDDQ. As for the cooler score I think it’s bogus mine says like 240+ sometimes, but I don’t really pay attention took to it.
@Deltatwo3
Жыл бұрын
@@videocardzrule354 Yeah to be honest with you mine goes all over the place I think the cooler score is kind of bogus as well. Regardless great video!
@Jolinator
Жыл бұрын
Great video. Have you tried playing with CPU VDDQ voltage? I bet you can get it way down from the xmp default 1.4v What cooler rating are you seeing in bios? Are you still working on getting 8200 with these dimms?
@videocardzrule354
Жыл бұрын
I’ve been trying to stabilize 8200, but I have been limited on time. I did bring my IVR TX down to 1.325V. I’m not sure how low I can get it down to. I can get 8200 stable enough for apps and games. But it’s not actually Anta777 Extreme stable for more than about 5 minutes. I guess this is due to temps.
@BBWahoo
Жыл бұрын
Delicious Build
@240rahul
Жыл бұрын
What chiller are you using?
@darknesschilled
9 ай бұрын
I have the 13900ks and i cant even get it stable at 6.2ghz.. it wont even boot to windows.. keep getting BSOD.. watchdog timer error.. If i run it at 6.1ghz its still unstable but wont crash as often.. the e-cores wont go above 4.5ghz.. can only run them at 4.4ghz
@Pavasoz
9 ай бұрын
whats your sp score
@darknesschilled
9 ай бұрын
@@Pavasoz p-core sp 113 and e-core sp 93.. Stock clocks with xmp
@ashryver3605
Жыл бұрын
Did you have any comparisons possibly of a similar overclock (or even the same) but when NOT on direct die? (Maybe stock solder, or just liquid metal delid). All I want out of my soon-to-be 13900KS & Apex board is 6ghz all cores or 6.1ghz if possible (or maybe not all core but majority). But I have no intentions to delid it until at least 5 years later LMAO, but I will be pairing it with the best AIO atm the EK 360 Nucleus. What RAM kit do you have also? 8000mhz with no fan is impressive. Was going to buy the Corsair Dom 7200mhz C34 since it should be Hynix A-Die.
@videocardzrule354
Жыл бұрын
I bought my 13900KS brand new, I opened the box and put it straight in the delid tool lol. I never even ran it stock. The stock IHS and solder really limit these CPU’s substantially!
@Melv815
Жыл бұрын
Nice video! But for me its frustrating currently 😁 i have a KS with SP107 / 116P 89E and i cant go higher than 5.7 all core even this is difficult with higher Ecore Ratio. I have Mora420 and Supercool Direct Die. I tested hundreds of variations but all weird. i have an Apex Z690 with latest bios. cinebench crash’s immediately no matter what voltage and other settings. :(((
@videocardzrule354
Жыл бұрын
I had a Z690 Apex and just struggled with CPU overclocking. I only ran the board for 3 days. Some samples are just bad. Z790 Alex is so much better. Unless you’ve got a proven good quality Z690 Apex with good dimm traces, I’d say it’s not worth it. I moved back to my MSI Unify-X which was before I got my Z790 Apex which is what I run now.
@Melv815
Жыл бұрын
@@videocardzrule354 i ordered now the z790 dark kingpin maybe its doing better :)
@sarinmcgee2031
10 ай бұрын
Same for me mate. z790, 13900KS, 7200mhz ram. Cant get anywhere near these. Crashes. Never get a boot. Prob just a lower end of the KS is my guess
@sarinmcgee2031
9 ай бұрын
Just fyi. My CPU failed and got new CPU that doesn't stutter and not slow and will do 6g all P core
@venividivici4253
5 ай бұрын
I tried your profile but It will not boot up to Windows. Full custom loop and no direct die.
@HollywoodEDC
Жыл бұрын
Whats your AC LL and DC LL? it seems kind of weird that you use LLC of 6 however do not show your AC and DC. If your setting both in Auto, then I can see why you had to underbolt your Global SVID otherwise your voltage would be like 1.5v during over-shoots. Im truely scared what your boards voltages would look like under an Oscilliscope. I have the same board and I run 0 offset's but I have heavily modified my LLC 6 setting down to only 0.02 for AC LL. This allows me not to have to set an Global Offset like you did.
@anderslundstrom4388
7 ай бұрын
i never ever seen my p-cores being at turbo speed even if i have only 5.6 turbo 6.0 (Windows 11). tried a few power plans, (using only air cpu fan atm but temps just below 50 idle) gonna try enable cstates..
@toonnut1
Жыл бұрын
👍👌
@andrey-13.
5 ай бұрын
I have Cinebench R23 does not pass (error) all the settings are like yours. I set levei 7 and 8.and he lowered the frequency.everywhere
@Panndaaaaa
Жыл бұрын
What's you're average vcore for this OC?
@videocardzrule354
Жыл бұрын
Under a heavy load like R23 it shows around 1.288V. Lighter loads like idle or single threaded apps show higher voltages up to 1.394V+
@lassekristensen385
Жыл бұрын
@@videocardzrule354 I find that incredible on LLC6? Mine KS need 1.33-1.35v I think! 1.288 dont even cover 5.8Ghz. your CPU is NOT normal and ALL KS are NOT the same!
@lassekristensen385
Жыл бұрын
Hello. I have a KS 108SP. I have never been able to run it at 6ghz all core without it having to use downclippiing.. the maximum ever I could cool just under 100c was x58 all core.. So I tried your configuration.... and if I use the -0.069mv adaptive my CPU is on 1.369v or something like that.. I dont even get into Windows... So if I try to adjust to yours.. I type in -0.039mv and it sits in BIOS 1.394v .... But BSOD when I try to run CBR23. I dont think my cpu honestly can run that undervolted, and therefor I dont think all KS are same.. I find mine to use always a notch more in LLC or voltage.. Anyway I think my chip need at least 1.439v for 6 GHz all core which is basically impossible to cool. I have direct die and water cooling. Are you using auto on all OCTVB Ratio clipping? I find your configuration very impressive ... and I dont know the secret to this is even possible! :) In general my experience is that messing around 6Ghz or more mine is not that happy on LLC6 but more on LLC7 or 8. I have the ASUS HERO Maximus Z790
@olega5141
8 ай бұрын
Hey, thanks for the video! I'm currently running a 7200 cl34 32gb kit and my sa voltage is set to 1.25. How low can you run it at 7200?
@videocardzrule354
8 ай бұрын
I could run DDR5 8533c40 with 1.240V SA. Or 8400c36 with 1.240V SA also. Never tried low SA with DDR5 7200 on this motherboard.
@MrJB327
3 ай бұрын
SA and MC have a dependence of 150-200mV. If you move away from it, it is difficult to find the stability of the system. For example: if you have MC 1.35V, then SA can be set to 1.15V. For example, on my Z790 Apex Encore it’s SA 1.15V, VDDQTX 1.31V, MC 1.35V with an XMP profile of 8000 MHz 38-48-48-84. And yes, VDDQTX has a dependency on SA. But I did not find exact data in what range this dependence lies. Specifically, in my case, the 160-200mV range from SA turned out to be stable.
@olega5141
3 ай бұрын
@@MrJB327 Thank you very much for your valuable input! Currently I have MC voltage at 1.290 (Auto) and VDD/VDDQ at 1.40. I'll try 1.20 first, then 1.15 and lower. My guess, I probably should get away with 1.10. My mobo is z790 Apex (white), so 7200 seems like a joke, but it's enough for me right now.
@MrJB327
3 ай бұрын
@@olega5141 For many guys from the forums, 7200 MHz works without problems at 1.1V via SA. I was able to achieve stability on the 7200 even at 1.05V. Good luck.
@nenhum9116
Жыл бұрын
hello could you please show the thermal velocity boost section and internal cpu power management
@videocardzrule354
Жыл бұрын
All of that is on default. I don’t use TVB.
@gm4210
8 ай бұрын
What does the VT-d option do?
@ColdVenom159
8 ай бұрын
you should really tell people youre running a custom version of windows thats been stripped down alot. idk why people leave out so much information on their videos. try that on a reg version of windows bet yathe chip crashes.
@240rahul
Жыл бұрын
What is your flow rate in your loop? Just curious
@videocardzrule354
Жыл бұрын
I have no idea lol.
@beber8635
Жыл бұрын
Possibilité de partager le profil bios. Merci
@starfuxer
Жыл бұрын
Hmm, would anyone safely buy the Apex Z790 after all the clusterfuck that ASUS is going into lately? Nice video btw!
@davemorphling7432
Жыл бұрын
is there any option in bios to improve POST time? I have a z690-e and it takes 20-30sec for it to start BIOS boot process.
@videocardzrule354
Жыл бұрын
Look for fast boot, and I would enable that, also search for any other fast boot options. It sounds like your system is training the memory each time you power it on. Once you get in the bios make sure you hit F10+ Save before restarting. This should help.
@davemorphling7432
Жыл бұрын
@@videocardzrule354 all fast boot options are already enabled. yeah it's memory training, not sure how to bypass it.
@YTjuanchicod
Жыл бұрын
Why you dont OC this rams to maybe 8200 or 8400? You think that can lose that stability?
@videocardzrule354
Жыл бұрын
I overclocked them to 8600c38
@YTjuanchicod
Жыл бұрын
@@videocardzrule354 wow, what gpu you are using? And what games you play?
@user-hf6ym5mb2n
Жыл бұрын
Do you have any used rog maximus z790 apex?
@videocardzrule354
Жыл бұрын
I only have my one motherboard.
@lassekristensen385
Жыл бұрын
I just tried the setup once again.. I could not get it stable in Doom Eternal full on unless LLC8 and -0.060v .. . I REALLY dont get how you can run your CPU with LLC6 and so low voltage! ?!?!?!? !I have a SP 108 KS. Z790 Maximus Hero. Its also direct-die with LM. LLC6 never works for me with 6 Ghz and in particular not with under volting. I am getting a Chiller within a month and see if that helps.. But HOW can you run LLC6 and with so high frequency with out crash? IS it the chiller that makes ALL the difference?!
@videocardzrule354
Жыл бұрын
The chiller helps. But honestly the Apex Z790 is on point with sending low voltages right out of the box. Great firmware and great bios. My water temp right now is set to 76F (At the lowest) and it easily runs up in the 80’s, chiller cuts on and cools back down to 76F. I can do this overclock without the chiller. I even have a DDR5 8800 profile for my 2x24GB 7200 sticks that runs flawlessly even during gaming and the last of us shader compile. Sometimes I set my chiller to 60F water temp. But I definitely don’t need it. What direct die are you using? The direct die alone should provide enough capability to allow 6Ghz daily.
@lassekristensen385
Жыл бұрын
@@videocardzrule354 I have the EK DirectDie, and because my CPU basically needs 1.4v for 5.8 Ghz that is the max I can take it.. otherwise 100c... if I run a trimmed stock 5600 Mhz voltage with LLC3 I can get it down on 80c. But I want that chiller.. hehe.. I have never really successfull run 6 ghz on LLC 6.... I believe I need to set it to 1.46v which is pretty much. I am buying the AlphaCool Eiszeit 2000 .. (1500w) Honestly I believe one time I did get it to work that I needed to give like 1.46v on LLC 6...
@alsammanlepro96
Жыл бұрын
Tried the same setting and getting blue screen pretty sure it’s a voltage issue should I increase my core voltage ?
@videocardzrule354
Жыл бұрын
Hey under DIGI+ menu Try LLC 7, and reduce your single thread to x62 on (4) cores.
@LeafGreenHDD
Жыл бұрын
you need a golden chip and a chiller
@yamcha2209
Жыл бұрын
Are you running any ac dc settings for llc6
@videocardzrule354
Жыл бұрын
No, that’s all on stock/auto.
@yamcha2209
Жыл бұрын
@@videocardzrule354 cheers ty
@keylanoslokj1806
5 ай бұрын
Too much work for daily
@nXqd
Жыл бұрын
hi there can you make a video how you seal the CPU permanently with what kind of adhesive after delid ? thanks
@sk8terfresh
Жыл бұрын
Which ram is that g.skill?
@videocardzrule354
Жыл бұрын
2x24GB DDR5 7200c36 it is available on Newegg for $259.99 USD. www.newegg.com/g-skill-48gb/p/N82E16820374459?Description=DDR5%207200&cm_re=DDR5_7200-_-20-374-459-_-Product
@Bostonski
Жыл бұрын
So you can only play for 5 min as water starts boiling 15 min into gaming on monster pc like that. 😆 joke. Impressive numbers
Пікірлер: 74