Recién adquirí ina patent elastique, me vienen muy bien tus consejos. Te envío un gran abrazo desde Córdoba Argentina 🇦🇷 Gracias Graham !!!
@sjl6869
11 ай бұрын
I'm glad I found your channel. Thank you so much.
@FlexitoolGuides
11 ай бұрын
Glad you enjoy it! And thank you for that comment!
@paulhayes9832
Жыл бұрын
Excellent series of videos, much appreciation ,your clarity and attention has made my purchase operational in very little time. Thank you .
@FlexitoolGuides
Жыл бұрын
Glad it helped, Paul!
@kevinbamkin9965
8 ай бұрын
Thanks so much for the series, I've just watched them all and have picked up quite a few good tips. 👍🏻
@FlexitoolGuides
7 ай бұрын
Great to hear!
@donaldmatthies6026
4 жыл бұрын
That is the best explanation of needle and thread I have ever seen, thank you for such a great video!
@FlexitoolGuides
4 жыл бұрын
Thanks!
@tomasobrogain6973
4 жыл бұрын
I was lost in regards to thread and needle sizes up until now, thanks so much for this video I finally understand this now.
@FlexitoolGuides
4 жыл бұрын
Glad that it helped you... !
@kenchan5624
2 жыл бұрын
This video helps a lot of people including myself thank you
@FlexitoolGuides
Жыл бұрын
Glad I could help!
@rupertmiller9690
3 жыл бұрын
Knowledge gained, leather working skills level up. Much gratitude.
@FlexitoolGuides
3 жыл бұрын
Great to hear! Thanks!
@sauldavids5059
Жыл бұрын
Thanks, for clearly explaining needle and thread combination thread must be thinner than needle eye.
@FlexitoolGuides
Жыл бұрын
You are welcome!
@davidmcmahon8262
3 жыл бұрын
Great video, and very good easily understood explanation of thread to needle combinations, many thanks.
@FlexitoolGuides
3 жыл бұрын
Glad it was helpful! Regards!
@OTTAOTTA64
4 жыл бұрын
Thank you for your explanations. A very useful video.
@FlexitoolGuides
4 жыл бұрын
Glad it was helpful!
@MIKEMAKESTHINGS
6 ай бұрын
Great video. Very informative. Do you know if anyone makes a flat shank 140/22 needle that has a triangular point or other cutting point. The round needles will just not penetrate the leather well. I modify industrial needles but would rather buy already made up needles. Thanks.
@bwnco
2 жыл бұрын
Good video guy. You really help us out alot...Thanks!
@FlexitoolGuides
Жыл бұрын
Glad it was of help to you!
@thesmugz830
Жыл бұрын
Great video
@FlexitoolGuides
Жыл бұрын
Thanks!
@chandlersanders
3 жыл бұрын
Your videos are a ton of help. I’m currently using 138 thread and size 20 needles but I’m having issues with the thread snapping almost immediately.
@FlexitoolGuides
Жыл бұрын
Thanks! Check tensions but also material can cause it (rough edges).
@paisley436
4 жыл бұрын
Wonderful presentation! (thanks for the better sound too)
@FlexitoolGuides
4 жыл бұрын
Glad you enjoyed it!
@chaloopers
Жыл бұрын
Thanks this was so helpful
@FlexitoolGuides
Жыл бұрын
Glad it helped!
@robertward553
3 жыл бұрын
Ya, I agree, great comparison video, thanks.
@FlexitoolGuides
Жыл бұрын
Sorry for late reply... been off the channel quite a long time... thanks you!
@Mystichandworks
Жыл бұрын
Great info. Thank you
@FlexitoolGuides
Жыл бұрын
Glad it was helpful!
@Esteric100
4 жыл бұрын
Great video answered a lot of questions
@FlexitoolGuides
4 жыл бұрын
Glad it was helpful!
@lyntonblair9016
7 ай бұрын
Very informative, thanks. I am thinking of getting one of these machines. I want to use it as a cheap "sew off the arm" solution, mainly for light fabrics. Would it be suitable for this purpose?
@FlexitoolGuides
7 ай бұрын
I would get an electric modern sewing machine for that. These work better for finicky heavier materials where you can stitch by stitch. Good luck with that venture though!
@mikepower4113
3 жыл бұрын
Great video. Will be referring to this video. Thanks
@FlexitoolGuides
3 жыл бұрын
Glad it was helpful!
@keyko555
4 жыл бұрын
Excellent, well done thank you.
@FlexitoolGuides
4 жыл бұрын
Thanks!
@tiffannystipe9626
Жыл бұрын
Hello, thank you for the awesome tutorials on these machines. Do you know if there is a way to use the wax thread for hand sewing in these machines? I really like the finished look and feel of the waxed sinue type thread.
@FlexitoolGuides
Жыл бұрын
Thanks for the comment! The only way would be to try it... These machines are extremely simple, so don't have the complex electronic feeds etc that modern machines do, and might make it easier.
@tiffannystipe9626
Жыл бұрын
@@FlexitoolGuides Ya that's true, I did try it but only once, I think I may try doing the heavy thread in the bobbin and the thinner on top. Thank you!
@FlexitoolGuides
Жыл бұрын
@@tiffannystipe9626 Great! See what happens, maybe it will work.
@tntboxers5207
4 ай бұрын
Do the needles shown here have a flat side? All the stores I've been only carry round shank and I think my cobbler has a flat side on the needle
@Viennapal
4 жыл бұрын
thank you this was perfect.
@FlexitoolGuides
4 жыл бұрын
You're so welcome!
@homeyv
2 жыл бұрын
Great videos! do you know if its common or know where I can get a needle size larger than 140? and will it fit in these Chinese machines?
@FlexitoolGuides
Жыл бұрын
Sorry for late reply... been off the channel quite a long time. If I remember you might be able to get a 160 to work but they are not in commercial production any where in the world, as far as I know.
@michaelkyle2409
2 ай бұрын
Graham can you help me fix my presser foot is not walking 0:33
@stephenbrunner482
3 жыл бұрын
I bought some Schmetz needles in size 20, but they don't have a "flat" size. Therefore, they are set to one side of the needle hole and impact the arm when running down inside the arm hole - cutting off the thread. Have you found this in your experience with aftermarket needles?
@FlexitoolGuides
3 жыл бұрын
Sounds like you bought the wrong type of needle. These machines only use flat shank needles. Regards!
@snapon1948
2 жыл бұрын
Hi Graham got my machine last week it came with a cone of black thred as its in chiness would you know what grade of thred they send out with machines .TIA
@FlexitoolGuides
Жыл бұрын
Sorry for late reply... been off the channel quite a long time. Not sure
@xKerilynn
4 жыл бұрын
Thank you for the advices! Are those nylon threads you are presenting?
@FlexitoolGuides
4 жыл бұрын
Hi - no they are, polyester.
@doncasper4474
10 ай бұрын
Where can i purchase the 140/22 needles
@FlexitoolGuides
10 ай бұрын
Unfortunately no idea at this time. Check search engines. Good luck!
@van403
3 жыл бұрын
Hi, are you guys still going? Tried calling the number on your website to order but it does not exist. Thanks!
@FlexitoolGuides
3 жыл бұрын
Unfortunately not in SA, Ettienne. Regards!
@pliniovassallo8358
2 жыл бұрын
Qual medida de agulha e linha pra costurar couro pra coldre?
@FlexitoolGuides
Жыл бұрын
Existe outro video na meu canal para explicar como combinar agulha e linha. Abs!
@tarekalkamash7453
3 жыл бұрын
Can I ask you for the link to buy these machines
@FlexitoolGuides
3 жыл бұрын
Look on one of the big web sellers, tons of individual sellers there. Regards!
@BURNETTFARMBOY
3 жыл бұрын
Where can we get the 140 22 needles.. only need one
@FlexitoolGuides
Жыл бұрын
Sorry for late reply... been off the channel quite a long time... very hard to get. Try Ebay.
@macwoodlee2532
3 жыл бұрын
it's very embarassing that the bobbin is too small. If i use thick thread in bobbin, it goes only 1 meters i guess..? Is there any solution to get this?
@FlexitoolGuides
3 жыл бұрын
Unfortunately not... the small bobbin can definitely be an issue with very thick thread, I have a bunch of bobbins set up so that I don't have to wind all the time. Regards!
@baciliozamora2552
3 жыл бұрын
Do you still have needles available
@FlexitoolGuides
3 жыл бұрын
Unfortunately not. Sorry can't help you there... Regards!
@BURNETTFARMBOY
3 жыл бұрын
Did you find any 140 22 needles???
@craigchristalaw2317
Жыл бұрын
You need to talk louder I cannot understand when you mumble
@FlexitoolGuides
Жыл бұрын
Sorry its hard for you to hear. I made these when I was just starting to produce youtube content. Unfortunately there is no way to just replace audio without deleting the video and re-uploading a completely new video with all that loss of history.
Пікірлер: 77