Love the toys you've built. Good to see you catching gold. Can't wait to see smelt results from the sulfides. Thanks for sharing
@Shane.Martin
6 ай бұрын
If ya listen real careful you can actually hear the tone change in the end of the jack hammer when it hits "Good" spots. Bloody awesome to watch, thanks for sharing.
@theminerstable4790
10 ай бұрын
Nothing more satisfying than listening to ore hit the bucket. Kinda like gold getting dropped in a pan. Good stuff for sure! Thanks for sharing your adventure!
@Kiwiboy-24
10 ай бұрын
The whole set up, awesome mate you have it all working bloody marvellously 👍👍 learning so much from your channel! Much appreciated 👍⚒️
@TheGoldmansChannel
10 ай бұрын
Thanks heaps mate! I really appreciate the kind feedback. 😁
@jethrodigger
10 ай бұрын
Great to see you've got the wilfley table up and running . The reef may be patchy with grades varying over short distances along the strike . Also good to see you back making Videos.
@TheGoldmansChannel
10 ай бұрын
Patchy, story of my life 😅. I won't give up on that one yet, will have to go and remove some wall rock to easier access the ore for a bit longer and hope to see some better returns.
@SRTAMBANGMINERAL
8 ай бұрын
Bagus sekali sobatku material batuannya.......salam satu provesi sobat ... sukses slalu.. ...
@etarheel1
10 ай бұрын
Man your set up runs so well, very efficient. Thank you for taking us along. I always enjoy each video. Pet the pup dog for me please.
@TheGoldmansChannel
10 ай бұрын
He said thanks for the Pet bro 🐶. Thank you from me also, for tuning in and leaving a kind comment 😁
@artestuninngbrasil728
6 ай бұрын
É OS GURI PÁI CHAMA CHAMA 🇧🇷✌😅🙏 DEUS É INCLIVÉL
@levimichael1136
10 ай бұрын
You added a shaker table to the mix!?!? You have an amazing setup my friend. Truly a slice of heaven.
@richardsmith9872
10 ай бұрын
what a great setup! you obviously thought out your needs for a successful operation. Very nice indeed, and yes that is gold mining for sure. I was just wondering yesterday why no videos on Hardrock mining in Australia, and I went to you tube this morning and bam here you are.🐐
@TheGoldmansChannel
10 ай бұрын
Thanks Richard! Not many aussies are lucky enough to have a foot in the door with exploration and mining companies like I fortunately have. Which means, without the Aussies spending ridiculous money on leases, bonds, and work permits they're restricted to using a hammer and chisel or pick and shovel to extract ore on a simple miners right. The rules and regulations here are suffocating to say the least.
@ROMANIVANOV8855
7 ай бұрын
НУ ТЫ И МОЛОДЕЦ БРАВО 👏 ПРОСТО КРАСАВЧИК 👍 ПРЯМ СЕЙЧАС ПОДПИШУСЬ 🔔 И ПОСТАВЛЮ ЛАЙК 👍
@garrettmillsap
10 ай бұрын
I must have missed an upload or two because i was waiting to see the shaker table and here it is! Lol nice set up. Looks great! Now i have to figure out why i didn't get notified of previous uploads lol
@TheGoldmansChannel
10 ай бұрын
Only missed the one vid, you're nearly all caught up now 😉
Another good video Bryan. Shades of Rickey's Reef. The more we took out the less we got. I'm sure you have another prospect to go to. That broken beaker has got to go - not up to the standard of the rest of the build.
@TheGoldmansChannel
10 ай бұрын
You're very right Rick. Broken beaker will be gone by next vid. I'm going to put the auto panner in its place!
@kellymichaud6442
6 ай бұрын
I just stumbled across this video and watched it. I think that you have the perfect setup.. not too big , not too small& also have a gold wheel. Did you make this? I suspect your in Australia or something like that … I subscribed and going to watch your other videos. Good job if you’re the builder of this plant& good job anyway getting it together if you didn’t build it. Kelly (British Columbia, canada
@TheGoldmansChannel
6 ай бұрын
Thanks Kelly! My crushing plant is mostly assembled out of retired old equipment I've collected over time. I reconditioned it all and modified it to all work as one big system like you see it today. So I can't take the entire credit there. Thanks heaps for your sub and for tuning in. I look forward to your feedback on future vids too! 😁
@gemaspreciosasdobrasil7809
9 ай бұрын
Uau show parabéns 👏👏
@aris5714
10 ай бұрын
heres un genio mi estimado,as hecho una miniplanta, que no requiere de cianuro ni ácidos que contaminan el planeta,un gran egemplo a seguir, saludos desde Perú
@mikewinings4120
10 ай бұрын
New subscriber, I've seen hitch mounted hand operated ore crushers that work well for the field,I assume you are out in the middle of nowhere, great video😊
@adzoutnabout8666
7 ай бұрын
Gday mate, imagine the old boys doing that with nothing but a hanky wrapped around there nose. Please take care, even when your mucking out. Enjoying your uploads mate.
@TheGoldmansChannel
7 ай бұрын
Only the smart ones had the hanky also! Can't imagine how many young men died of silicosis back then, it would have been horrible. Thanks for tuning in mate, and yes, I always keep safe 😉
@sam7835me
2 ай бұрын
😮 that's great specimens
@peterwiley4383
10 ай бұрын
Awesome set up.
@mrgreenswelding2853
10 ай бұрын
There might be some gold locked up in the sulphide.
@DR_SOLO
10 ай бұрын
roast them pass a magnet ova the material then peak it right?🤨😉
@Anashadk
10 ай бұрын
Great to see you show the troughs as well as the peaks, a lot of work to get that little amount and surely less monetary value than what it cost you to get it.
@TheGoldmansChannel
10 ай бұрын
Most sample projects are troughs, it's a significant investment in both time and money in the hope that one day it will pay off. I still hold hope, one day I'll find a ripper virgin pocket of reef 🤑
@Anashadk
10 ай бұрын
@@TheGoldmansChannel I hope one day to win something worth winning on the lottery, nothing wrong in dreaming.
@insAneTunA
10 ай бұрын
Your DIY jaw crusher seems to work very well. I don't understand why not more people copy your idea. Those crushers are very expensive when you have to buy them. 👍
@TheGoldmansChannel
10 ай бұрын
It's a beast! Well exceeded my expectations. Still needs a fly wheel and a larger feed assembly though.
@garyanddoris6022
9 ай бұрын
Nice to see some gold of any size cause there's many times ive come back empty handed , but yeah thanks for the journey....
@jph8266
10 ай бұрын
Dang two videos in 2 days woohoo 🥳 you’re back!
@TheGoldmansChannel
10 ай бұрын
See you in another 3 months now JPH 😆
@jph8266
10 ай бұрын
@@TheGoldmansChannel 🤣🤣🤣👍
@I.Live4oldcars.prospecting
9 ай бұрын
FAQs What are the rules for prospecting? You mustn't: use digging equipment besides non-mechanical hand tools use explosives remove or damage trees or shrubs disturb any Aboriginal places or objects , or disturb any historic place or object, or archaeological site or relic. To care for the environment when prospecting: drive only on public tracks and roads park only on the roadside avoid disturbing plants and grasses too much fix things before you leave, i.e. fill in holes, pick up your rubbish
@Pa.PatriotProspecting
10 ай бұрын
Nice work mate!
@annagray4208
10 ай бұрын
Good job, mate, you're having a go.
@mikewinings4120
10 ай бұрын
I wish I could find that grade here in the U.S
@jeffholmes1362
10 ай бұрын
Have you though of running the no 1 back over the table at the end to see if you can reduce the sulphides? Nice view in that little shaft. Thanks for sharing
@TheGoldmansChannel
10 ай бұрын
I do switch out the container towards the end and slowly re-run it over the table. I do the same with the port 2 cons. Tricky to do though, too much concentrates effect how the whole table works and flow needs to be adjusted. Best having those cons diluted throughout the given amount of material. I think I'm going to incorporate the auto panner into the system to process both 1 and 2 ports. Catch the gold and still keep the smeltable cons separate. That would be fantastic.
@jeffholmes1362
10 ай бұрын
@@TheGoldmansChannel keep sampling, I’ve taken adit samples that are crazy rich with gold then resampled and come up almost bare. Who the hell know what gold is thinking 😂😂😂
@TheGoldmansChannel
10 ай бұрын
@jeffholmes1362 Happens to me very frequently 🤣. We just gotta keep at it, we learn a little bit more about the geology each time. Eventually that knowledge will pay off
@micphoenix8200
10 ай бұрын
"We swear by the Southern Cross to stand truly by each other and fight to defend our rights and liberties."
@markhepworth
10 ай бұрын
No too keen on the old black fellas huh buddy..? 😂
@micphoenix8200
10 ай бұрын
@@markhepworth My shadow is black and I don't have an with issue it.
@nigelkelly8016
10 ай бұрын
Except when it came to Covid.
@nuggetella
10 ай бұрын
@@nigelkelly8016 Truth... 👉😷💉
@markhepworth
10 ай бұрын
@@micphoenix8200 🤦♂️ Nobody’s shadow is black 🤡
@Jonas_Aa
10 ай бұрын
What country is this? Seems at 21:40 that camera is set to wrong frequency compared to the lamps frequency, that is why it is flickering. Or if it is filmed with a phone, then not much to do.
@TheGoldmansChannel
10 ай бұрын
Good attention to detail there Jonas! Here in Australia we run 230/415v 50hz. My off grid system is the same. GoPro films at 4k30. Phone films at 4k60. So yes, the frame rate was the issue there 😁
@Jonas_Aa
10 ай бұрын
@@TheGoldmansChannel same problem here in Sweden. Most cameras especially the ones used for teams meetings are mostly set to 60 Hz default and gives flickering in other countries.
@KatarinaSanto
7 ай бұрын
Pelo tanto de energia e água que você gastou só deu esse pouco de ouro você saiu perdendo
@amateurboxing4806
9 ай бұрын
So not bad, your honest, nice gold you got congratulations brother
@TheGoldmansChannel
9 ай бұрын
Thanks mate! Much appreciated
@nuggetella
10 ай бұрын
Good luck... 👍
@davidlopes7276
7 ай бұрын
Adapt a chain on that stone grinder buddy 🙂
@shineyrocks390
9 ай бұрын
Hmm I'm thinking Rod mill A bit of magic acid Just a splash of mercury Make sure you polish the copper plate real good and grab a squeegee for maximum performance Na just kidding 😂 We all know you cant do that anymore but it works damn good Dont try that unless you're at home!
@smb5655
10 ай бұрын
a little dish soap on the Belt will help lubricate the rubber
@jimmywho4721
10 ай бұрын
As a beginner who is just getting interested in this as a hobby, I found this to be incredibly informative. I love your set up by the way. I notice that you seem to have a lot more space on your shaker table to the left that didn't see any material being run on it. Is this by design, and if so, for what purpose or reason?
@TheGoldmansChannel
10 ай бұрын
Thanks for the great feedback and for watching Jimmy! That free space on the table is by design, different densities of material will only make it so far along the table before being washed off, by the time it gets close to that left side we only want the gold and sulphides to be present. So in that respect it's doing its job well. On that more open section of table the water flow is also much lower, allowing the materiel that made it that far to be washed over very carefully so we don't blow any gold away. The table still isn't perfect, but it's getting really close now. Water flow still needs to be tinkered with.
@thisisbeyondajoke6748
10 ай бұрын
Do you use jetdry a water surface tension breaker
@TheGoldmansChannel
10 ай бұрын
Very rarely use it on the plant, usually not necessary. Quite often use it when panning out the concentrates though.
@lanehorsey5053
10 ай бұрын
Great stuff mate but better luck next time.
@avila2657
8 ай бұрын
Mucho trabajo
@DanjumaSuleiman-rr3gr
8 ай бұрын
Gree to see You Sir,pl l net to bay this mar
@MerchantMarineGuy
10 ай бұрын
Two handed carrying that bucket out of the mine and high stepping it over that berm…damn son
@levonmkhitarian742
9 ай бұрын
Hey there love your work, can your tell me the location maybe?
@TheGoldmansChannel
9 ай бұрын
Thanks Levon! I'm in Australia mate. 🇦🇺 cheers
@geoffgeoff143
10 ай бұрын
Two good reasons why you shouldn't tie your power cords togwther like that. Stress on conductors. Also, if the tool becomes live, you cant just pull it to unplug it.
@TheGoldmansChannel
10 ай бұрын
True and true Geoff. But I believe I'm more likely to stress the conductors (or the pins at least) with a loose high resistance connection and the generating set has an RCD on it if there is any ground fault that should protect me in the case of a conductor earth fault. 😁
@max9077
7 ай бұрын
make sense just for hobby!
@rightsidelanechoice7702
10 ай бұрын
Look at a go kart engine stop that’s what you need very simple.
@TheGoldmansChannel
10 ай бұрын
Tell me more? I don't quite understand your recommendation sorry?
@newtimergold7160
10 ай бұрын
Another awesome process vid mate, I use a hammer to but not sure about sharing what I do. Have you Ever had any enquiries from the powers above?
@TheGoldmansChannel
10 ай бұрын
Thanks Newtimer! I haven't had any enquiries from mines dept yet, but im sure it won't be long until some jealous fellow dobs me in, assuming I'm doing the wrong thing. Most of my work is conducted on active mining leases for different companies, they've already paid the fortune for the right to mine within their boundaries and have jumped through all the required paper work hoops to do it properly. All I need from them is written permission and I'm safe to use whichever machinery or methods they have gotten approved with the work permits. I also do my own exploratory work on private property, that does not allow me to use the jackhammer as far as I'm aware, but bloody hell. If you can't use a jack hammer on your own land, where can you? 😆. So I'm mostly covered legally.
@newtimergold7160
10 ай бұрын
@@TheGoldmansChannel nice, yeah I'm doing deep Eluvial exploration on private ground to. You should build a swinging gantry/mast on a small trailer with an eBay winch hanging off it, a long skip bucket with a hinged bottom door, wheel barrow wheels on it, pull ya 100kg samples out in 1 go and straight into the trailer. That's how I 'would' do it 😉
@I.Live4oldcars.prospecting
9 ай бұрын
What you need to know A Victorian miner's right lets you prospect and fossick for gold, gemstones and other minerals in Victoria: where you've got permission on Crown or private land where it's allowed using only hand tools, like metal detectors, pans and sluices. You must have your miner's right with you when prospecting and show it if asked by an inspector. You even need a miner's right for prospecting on your own land. Note: children under 18 don't need a miner's right when they're with you, as long as you have yours. For more information, contact Earth Resources Regulation .
@TheGoldmansChannel
9 ай бұрын
Once again, those are the rules yes. Rules that don't apply in this instance however, because I'm working for a mining company on an active lease with approved permits 😁.
@antoniosanchezfra
7 ай бұрын
👍
@sonnyrico
10 ай бұрын
How much material would be considered a production run for your set up
@TheGoldmansChannel
10 ай бұрын
I would consider processing a ton per day as being production mining. That would be a solid 10-12hr run with my equipment. Most I've done in a day was about 550kg though. Once I've got the hopper and auto feed connected up, that will be a much easier task. Fill the hopper with jaw crushed materiel and let it all run on its own.
@kaynefryday6637
10 ай бұрын
How did you get the gold out of the rocks that didn’t get crushed in the crusher
@TheGoldmansChannel
10 ай бұрын
Sorry mate, not quite sure what you mean? Which gold are you referring to?
@DR_SOLO
10 ай бұрын
worse thing that possibly could happen is having all your gold and glass dropping it it breaks and you lose it. Keep it in plastic get rid of that glass broken jar
@quinton3997
9 ай бұрын
What county are you in
@TheGoldmansChannel
9 ай бұрын
Australia mate 👍🏿
@user-re5mj9ww9o
8 ай бұрын
Ну и зачем нужно это? Хобби?
@TheGoldmansChannel
8 ай бұрын
хобби и работа. Золото - мой основной доход.
@damic.489
10 ай бұрын
Maybe you should clean the spiders first and also careful with the big chunks hanging above
@borukagan4543
8 ай бұрын
Attığın taş,ürküttüğün kurbağaya değmiyor…😅
@kevinerickson2595
10 ай бұрын
Do you roast your sulfides
@TheGoldmansChannel
10 ай бұрын
Currently just saving them. Will be roasting and smelting at some point soon though hopefully.
@steann1
10 ай бұрын
Please don’t lean your testicles over a belt and pulley while starting a motor…😳
@TheGoldmansChannel
10 ай бұрын
You were the only one to pick up on that so far. I thought I would have gotten a heap more comments about it 🤣.
@Mr1denson
10 ай бұрын
👍👍👍👍👍👍💪💪💪💪💪
@yahoogoldprospectingwithte2681
10 ай бұрын
Give me a call mate
@Gippslandgolddigga
10 ай бұрын
👍🍻⛏️
@williambenedetto7900
10 ай бұрын
IM THINKING YOUR SHAKER ISNT GETTING IT ALL..
@TheGoldmansChannel
10 ай бұрын
As mentioned in the video, the occasional microspeck makes it down into the tailings, but it's by far the highest recovery rate I've ever had with the plant. Just need to reduce the grind size more now! 😁
@thomasanglin1751
9 ай бұрын
You should get a folding chair to sit while you're drilling, your going to kill your back bending over all day.
@TheGoldmansChannel
9 ай бұрын
Gotta keep that back moving so it doesn't seize up on me 🤣. Can't sit still for too long!
@RTeBokkel
10 ай бұрын
Gold mining seems more genuine when it's narrated by an Aussie.
@I.Live4oldcars.prospecting
10 ай бұрын
Can't use power tools and jack hammers. So nice job breaking the law. Good way to get prospectors locked out of the bush 😡
@TheGoldmansChannel
10 ай бұрын
The old victim mentality again. A classic prospectors misconception. In actual fact, being a pansy and not standing by your fellow prospectors and miners in support of your rights is what gets them taken away. You will be happy to know though, I can take a compressor and rock drills to this spot and work if I so choose. Seen as its an active lease with approved work permits and I have written consent from the leaseholder to do so. Stand with your fellow man if you truly care for your rights.
@micphoenix8200
10 ай бұрын
@@TheGoldmansChannel We swear by the Southern Cross to stand truly by each other and fight to defend our rights and liberties.
@micphoenix8200
10 ай бұрын
Bet that didn't go the way you thought it would. But look on the bright side, now you can have a cry about that... legitimately 😂
@doitforthamaytus
10 ай бұрын
Laws are made to restrict everyone to the speed of the slowest in our society. Stick by the laws and be left behind by the rest of us who don't, choose accordingly.
@echoes1850s
10 ай бұрын
@@TheGoldmansChannel maybe next time in your video you need to tell then that so you don't keep getting comments like that. And it will shut them up to.
@AndrewBaker-ke2ky
10 ай бұрын
Hope you get tracked down and prosecuted, illegal to use power tools and also to remove more than 10kg in a 48hr period.
@TheGoldmansChannel
10 ай бұрын
What an ignorant and nasty thing to hope for another person, Andrew. You clearly don't know my situation whatsoever. Watch some of my other videos. Don't ASSume.
@echoes1850s
10 ай бұрын
Maybe before you comment ask if it's a on a licence area.
Пікірлер: 122