Wow, I've been putting off an AOS or Catch Can install because of how difficult and time consuming it looked but this actually looks relatively easy. Thanks for the video.
@cwalls6914
2 жыл бұрын
Just installed my catch cans today, this video definitley helped. Thanks for making this type of content man!
@Vanillabean_77
3 жыл бұрын
You're a real one for taking the time to be thorough on the install 💯 thanx again bro!!!
@Qazxswer68
3 жыл бұрын
I remember watching this video when it came out. Just got my radium catch cans today and came back for a refresher. Thanks for making this video 🙏
@mrm7525
2 жыл бұрын
You're video was the deciding factor to buy these vs aos. I'm going to install next week. One thing to note, I'm going to try to connect the last hose to the white plastic piece with it out of the car and just slide it all in at once. Thank again for the great install!
@jcreno253
2 жыл бұрын
Thanks! Ordered mine yesterday for my 19 WRX Limited that I bought a few weeks ago. Decided on these over the IAG and Cobb AOS cause of price and installation simplicity. Also didn't like the fact of the junk going back into the engine. Can't wait to install these!
@vichung2368
3 жыл бұрын
Thanks for your video it helped me A LOT with installing the catch cans on my 19' WRX!
@cody1995evo
2 жыл бұрын
This was an absolutely amazing video, you’re absolutely right there’s no videos on this and I was looking for a system that does both vacuum areas this will be perfect for my 21
@beans7963
3 жыл бұрын
Thanks for the video, I also went with this setup since I do my oil changes and general maintenance. Will be installing mine this weekend!
@K03sport
6 күн бұрын
just ordered the radium dual can kit (from IIR ironically). should be a fun install. I will also change out the pitch stop mount; because "while I'm in there" ... hopefully I will get a review onto the site soon (w/pictures of course)...Radium changed the box color to black btw. Also, undoing the cans to empty them; how's that going to work since they look stuffed behind the ABS pump???
@SubieShakedown
3 жыл бұрын
Wow I love how tight and clean that system is! Nice video. Looks like a PIA, but I’m def gonna be doing this kit also. Nice video!
@_YraGvisual
3 жыл бұрын
thanks for the vid. just purchased one and im waiting for it to arrive and this vid help tons for prep. great content bro keep it up 🤙🤙🤙
@markmaceachern4131
3 жыл бұрын
Nice man good video. Looking into this setup for myself over aos because I live in Canada and gets cold AF.
@ChazOfGod
3 жыл бұрын
That’s a beautiful design, definitely getting these.
@StreetInspired1
3 жыл бұрын
I was stoked when I saw that they filled that weird gap between the fender and abs system!
@ChazOfGod
3 жыл бұрын
@@StreetInspired1 that’s what sold me, it’s a perfect fit and looks oem.
@davo5400
3 жыл бұрын
Just ordered one for my 2018. Thanks for the video should make this a fast project.
@shakultra
5 ай бұрын
At 1:15 If you upgraded your turbo, why would you need to upgrade your AOS to a performance one? I upgraded my turbo and it was working fine and it stated leaking oil. I sent the turbo in for a warranty inspection and they said it was in perfect condition. I still bought a new turbo had it installed also installed a perrin turbo sump restrictor and still had the oil leak problem. I wonder if I should just get some catch cans and see if that's the problem.
@sinoBaseballer
3 жыл бұрын
Thanks for the video. I will get the cans over AOS. less intimidating installation process.
@mikeyrov5230
Жыл бұрын
This same process for the STI bro , 2017 an AOS seems popular but install looks hard on those
@ThuGfunk
3 жыл бұрын
Hey should you reuse the fabric heat wrap on the new hose that goes down to the turbo?
@anthonyversace6027
2 жыл бұрын
okay can you explain why some catch cans only come with one. like im confused on which side i would put the one catch can if i only got one. so what is the difference between one or two catch cans?
@syedjhussain3645
3 жыл бұрын
Appreciate the knowledge my man!
@jimmytheshark86
2 жыл бұрын
Hi, great video! Thanks for taking the time to make it! I got a slight kink in my 5/8 hose by the charge pipe, think it will harm anything? How can I get the kink out? Thanks!
@qrtrscale
3 жыл бұрын
nice job, clean set up.
@qrtrscale
3 жыл бұрын
Curious ... now that you've had the system for a while, how much oil do you capture in both of the cans. I'm curious which can gathers the MOST oil. Also, at what interval do you empty it? Thanks!
@poandasan
2 жыл бұрын
Thank you for making this video! After teetering between this and an air oil separator I decided on the radium based on the installation video you made. I have the same grimspeed tmic, and a grimmspeed charge pipe. Hoping the install will go as smooth as yours. Question am I right in saying no need for a tune after installing the catch can since no sensors are being effected? You got a new subscriber!
@StreetInspired1
2 жыл бұрын
No problem! And yep you're right no tune required for these so you should be good to go! Thanks for the support!
@K03sport
Жыл бұрын
I have their brake master cylinder brace and it is a nice piece...plus it also doubles as a mount for their AOS. These systems aren't cheap. I've seen systems for both the pcv and ccv, so which system/vent do you put the catch cans/AOS on? Can you run both an AOS and a catch can or is that too much?
@terraformingcats8175
2 жыл бұрын
Radium makes a dual catch can for the 22+ WRX. Can you guys PLEASE make an install video for the 22+ WRX?
@lopezam07
2 жыл бұрын
I have these catch cans but when I tried putting on my big sf intake it didn't fit.. the hose was in the way..
@StreetInspired1
2 жыл бұрын
Yeah some intakes interfere with them. I'm pretty sure that's usually listed in the description if them. I think most people running the Cobb intake cut a small section out of the box.
@Mikey-kw7rj
3 жыл бұрын
Hey I'm currently installing mines on my 2020wrx and the new hose that goes into the intake inlet nipple cannot go all the way on to the nipple no matter what I do. Is this ok? I tried lubbing everything up too.
@K03sport
2 жыл бұрын
Try a different hose and use a male/male coupler. Put a 3-4" (or longer hose different than the one in the kit) and then use the coupler to join that hose with the one from the kit. Some trimming maybe necessary
@user-wk5bk1we8c
3 ай бұрын
no offence but running a bigger turbo in a iag street series or radium AOS does not do that lol i have a iag street series on a garret g30-900 at 34psi and its just fine
@johnryan2288
2 жыл бұрын
Thank you thank you thank you!!!!
@cayzerjin128
3 жыл бұрын
How about the stage 2 boomba oil catch can are they good too?
@StreetInspired1
3 жыл бұрын
I haven't seen those before. Most catch cans will all work the same though as long as there's baffling inside the catch can they should be equally as effective.
@5W1M
3 жыл бұрын
How are the catch cans doing? Did they collect a good amount? I have an iag aos v3 rn and I’m thinking about switching to this catch can setup instead.
@StreetInspired1
3 жыл бұрын
So far so good! I checked the built in dipsticks a few times and they aren't wet yet so its not full enough to be on the dipsticks but I have only put about 2,000 miles on them. Next time I change my oil I am going to remove and empty them and see how much they collected. The car still has very low miles so that may be a contributing factor. But when I remove the dipsticks it definitely smells like oil in there, just not full enough to hit the dipstick.
@5W1M
3 жыл бұрын
@@StreetInspired1 good to hear, thanks!
@jcreno253
2 жыл бұрын
So i just opened up my setup to check it out and it looks like Radium has changed the dipsticks. They're just a solid aluminum, doesn't have that green coating that changes colors showing how full it is. Kinda sucks I thought that was pretty cool on yours.
@StreetInspired1
2 жыл бұрын
I belive they've changed design a few times. The top banjo bolts used to be green too and my kit they came black. I thought the Radium green was cool and made them stand out! Haha
@jcreno253
2 жыл бұрын
@Street Inspired Yea I thought so too. The build quality is very nice though.
@1heckinboi
3 жыл бұрын
Just to piggy back on this video, You are able to get the hose off/on WITHOUT taking the a/c compressor off with some long nose needle pliers, you just need to guide the hose back on and it'll go on just fine. And if you have a FMIC like i do, i found it easier to jack the right front corner because trying to get the turbo inlet hose on from the top is impossible. Can be done without even touching the radiator fan
@K03sport
2 жыл бұрын
.
@prodigy2k7
3 жыл бұрын
How do you empty it when it’s installed? Looks difficult.
@StreetInspired1
3 жыл бұрын
kzitem.info/news/bejne/lp6rnoerf5uIdY4 there's my video on that. Not hard at all
@DeimosReign1
2 жыл бұрын
Can you do an install video for the 22 WRX? Radium has catch cans for the new WRX now.
@StreetInspired1
2 жыл бұрын
Oh that's awesome, I'll reach out to them and see if I can make something happen!
@cody1995evo
Жыл бұрын
It’s it 438 US dollars?
@reecebready5962
2 жыл бұрын
I can’t get ANY of the hoses on to the fitting. I’ve tried lubing. Wtf
@Dyynamics
2 жыл бұрын
The one on the intake manifold is the hardest I only got half way
@Twrx421
2 жыл бұрын
What is that whistle sound when I installed my catch can?
@StreetInspired1
2 жыл бұрын
Not sure what you're referring to. I didn't have any added noise or whistle after installing mine. I would dowubl3 check that all your lines are sealed properly and your catch can dipsticks are screwed in all he way with the seals.
@xshangheighx
2 жыл бұрын
Did you have to drain any fluids before doing this install?
@StreetInspired1
2 жыл бұрын
Nope no fluids needed drained it was a dry install!
@Cyntrik
3 жыл бұрын
Did you get the PCV or CCV option? is there a difference? (sorry if this is a dumb question.. there's both these options on subispeed)
@StreetInspired1
3 жыл бұрын
That sounds like they are selling each catch can separately. This is from Radiums website for the full kit: "The forward catch can intercepts the CCV line and the rear catch can intercepts the PCV line. The system is completely sealed and retains factory function of the PCV valve."
@Cyntrik
3 жыл бұрын
@@StreetInspired1 aw I see! So one can is PCV and the other is CCV. Got it! Thanks for the help!
@mrm7525
2 жыл бұрын
Do you find it difficult to empty the cans running the hoses underneath?
@StreetInspired1
2 жыл бұрын
I simply lose the 2 bolts holding the bracket and unscrew the cans and dump them out. It's been really easy though.
@mrm7525
2 жыл бұрын
@Street Inspired thanks for the reply! I was mainly asking in case I should leave a little bit more play in the hoses to have more room to lift the bracket out to empty. But if you have enough slack to lift, I'm good to go 🤙
@StreetInspired1
2 жыл бұрын
@@mrm7525 for sure, a little slack is good but you don't need much!
@pumpkinspicelatte1731
Жыл бұрын
Will this AOS fit a 2019 Wrx with an ETS intake with their box. It looks very similar to the Mishimoto hes got in this video but i dont know if the exact dimensions are the same or if the ETS is longer or not
@MrYammizz
3 жыл бұрын
Did you get your 20 with no miles if so did you do the recommended 1k mile break in ? I was wondering if I could do some HW break in to get miles higher
@StreetInspired1
3 жыл бұрын
I got mine with 8 miles on it. I did a minor break on for 1k miles. Did a few half throttle pulls here and there after 500 minles. Never went over 6,500 rpm, and avoided staying at one rpm for too long. After 1k miles I changed the oil and filter and started modding!
@MrYammizz
3 жыл бұрын
@@StreetInspired1 that info is much appreciated got mine with 4 miles only have 300 so far lol its killing me but being patient .
@_k808x__6
3 жыл бұрын
Is disconnecting negative battery terminal required ? The instructions say to what would happen if you don’t ?
@StreetInspired1
3 жыл бұрын
I feel like everyone says that just to cover them if something happens. I never disconnect my battery unless I'm messing with airbags or cutting into live wires.
@_k808x__6
3 жыл бұрын
@@StreetInspired1 could anything happen ? So I should be okay to do this set up with out disconnecting batter terminal ?
@StreetInspired1
3 жыл бұрын
@@_k808x__6 I don't belive so. You only touch one electrical connector the whole install. I had no issues. But you can do it if want the extra peice of mind you'll just have to reset your clock and settings on the HUD.
@_k808x__6
3 жыл бұрын
@@StreetInspired1 thanks for the quick reply !
@_k808x__6
3 жыл бұрын
Sorry I have a different question can I use anti seize for lube or should I use compression oil ?
@justinchmura1778
2 жыл бұрын
How much oil would I need total to do a whole oil change with this system?
@StreetInspired1
2 жыл бұрын
Same amount of oil as before the install. 5.4 quarts.
@justinchmura1778
2 жыл бұрын
@@StreetInspired1 really? I’m surprised since they hold like 7 fl oz each, thought it would add to the maximum it takes
@StreetInspired1
2 жыл бұрын
@@justinchmura1778 they don't get filled with oil you install them empty and they just catch any blow by oil that would otherwise end up getting pulled into the engine. I empty them every oil change and there's usually less than 4 Oz of oil combined in them.
@justinchmura1778
2 жыл бұрын
@@StreetInspired1 thank you so much!!
@RIVIMAX
3 жыл бұрын
Hey man just wondering if you could make another exhaust video once you get a resonated mid pipe since the one you did a couple years ago was with a cat less j pipe and I wanna know what it sounds like with the catted one
@StreetInspired1
3 жыл бұрын
Definitely will. I'm curious too. I have a feeling it will be too quiet and no turbo spool but im still on the hunt for a cheap one!
@RIVIMAX
3 жыл бұрын
@@StreetInspired1 Alright cause I’m interested in getting a catted j pipe but I don’t want it to sound raspy or very loud, right now I got just an SRS Axle back and that’s plenty loud and the right tone
@StreetInspired1
3 жыл бұрын
@@RIVIMAX I was thinking of the invidia q300 or the asw touring catback both are resonated with huge mufflers but still have a nice aggressive tone and no rasp but I heard videos and there's little to no turbo spool coming through the exhaust and they're super expensive i could buy a set of wheels for the price of one of them lol
@RIVIMAX
3 жыл бұрын
@@StreetInspired1 yeah I’ve heard the q300 and I’m in love with it’s sound but it’s really rare to find the one without the burnt tips and I don’t dig the rolled tips but besides that it’s definitely one of the best sounding ones out there
@thecarsavant
3 жыл бұрын
@@RIVIMAX Waiting on Cobb to ship my catted/resonated J-pipe. Will be pairing it with my PLM resonated midpipe and Remark muffler deletes
@thedynasty9594
2 жыл бұрын
put it ooowwwwwn
@jasond126
2 жыл бұрын
Is there a filter?
@StreetInspired1
2 жыл бұрын
There's baffling inside that the oil clings to and drops down in the can
@remissiveslave
3 жыл бұрын
Really hate that I bought this car. Especially knowing they come from the factor with the equivalent of batteries not included with some electronic device. So bought a fraction of a full car for the price of an complete one. Everything that can make these expressly shit, you have to mod or tune out. Fuck subarus.
@justinshute5726
10 ай бұрын
IAG aos was my choice as having frozen cans wasn’t something I wanted. To each there own, of course now you can just get them from our for the vb you bought. Lots of bad decisions for you
@StreetInspired1
10 ай бұрын
I never had a frozen catch can and in Pennsylvania we get winters as low as 0°f and never had an issue with mine. The Radium Cans were one of the first things I did to my VB.
@greggregorich8048
3 жыл бұрын
now i know all car engineers like all of them all stooped like MB, PORSCHE,AUDI,CRYSLER EVEN ROLLS ROYS NO ONE FIGURE THAT THEY NEED INSTALL SIMPLE OIL CATCH CANS LOL OMG!!!
Пікірлер: 93