Hope this video inspires you to give these a try! Any questions just comment below! Thanks
@judichristopher4604
2 жыл бұрын
So BEAUTIFUL
@TSRCreations
2 жыл бұрын
Thanks!!
@lifemelody2010
Жыл бұрын
Very nice ❤
@naptimecreations
3 жыл бұрын
Awesome, love them both. I think #2 was my favorite 🤗
@TSRCreations
3 жыл бұрын
Thanks. Yes the black ink is magical!
@naptimecreations
3 жыл бұрын
@@TSRCreations ❤🤗❤🤗❤
@emilyholloway8659
Жыл бұрын
I know Im late to this but Thank You so much for this detailed video!
@TSRCreations
Жыл бұрын
Thanks!
@angelikahillmann8372
2 жыл бұрын
Beautiful!
@TSRCreations
2 жыл бұрын
Thanks
@alk230886
3 жыл бұрын
Fabulous!!
@TSRCreations
3 жыл бұрын
Thanks!!
@patriciaharkin1571
3 жыл бұрын
Beautiful, I love them both. It's amazing the shades and tones you get from the pitch black and ink.
@TSRCreations
3 жыл бұрын
Thanks! Yes the pitch black by ranger is amazing by itself!
@Kathy-Carr
3 жыл бұрын
They both turned out gorgeous! I’ve used the Brite Tome on paintings...left a rubbery feel, but maybe it was too thick. Thank you!!!
@TSRCreations
3 жыл бұрын
Thanks. I just tried it on a painting and I wasn’t impressed either! I will keep it for the cups!
@Kathy-Carr
3 жыл бұрын
@@TSRCreations oh, thank you!
@andreasinclair3630
6 ай бұрын
This is SO beautiful! What are you thoughts on using dishwasher safe mod podge?
@TSRCreations
5 ай бұрын
Sorry just saw this. I don’t like the modge podge because it leaves streaks. But it works
@christinekondratick258
2 жыл бұрын
I had a couple of questions for you. 1) why do you use triple coat instead of karma varnish? 2) Have you ever tried placing electrical tape around the lip of the cup before you spray it? Will that help keep the varnish and uv from getting on the place you place to your month.
@TSRCreations
2 жыл бұрын
So I use a couple coats Kamar clear varnish before the brite tone because the brite tone will reactivate the inks and ruin the design. You absolutely can tape off the rim just be mindful that you may see a indentation or line where the varnish stops. The cup after varnished is safe to use after a 30 day curing process. Thanks
@artfulbarb5775
Жыл бұрын
Thank you for sharing your art. I'm new to alcohol ink. I experimented on an old mug I had. Love how it turned out. Question. Did you spray paint the mug or just clean it with alcohol? I like the markers you used. Seems like you get more control. Thanks again for sharing.
@TSRCreations
Жыл бұрын
I just wipe the mug with alcohol and let it dry. Thanks!
@janetdepoe699
2 жыл бұрын
Thank you for sharing. What are you holding the cup with while you are painting it? Thank you for your time.
@TSRCreations
2 жыл бұрын
It is the arm if a cup turner. Thanks!
@birdiepareagle
3 жыл бұрын
Just to clarify - you spray the cup with the UV Archival / Triple Clear then apply the Bright Tone. How long do you wait after the triple clear? Also, I noticed you did the Bright Tone over the lip - would it be easier to mask the lip off and just put the Bright Tone over the actual abstract art? Even though Bright Tone says there are no hazardous or toxic ingredients - just wondering if you've had any issues with it. Thanks so much - your art is beautiful!!! Love what you created!!!
@TSRCreations
3 жыл бұрын
Hi Carol. Thanks! Yes I spray them prior to coating them. I guess you could just put the bright tone over the inks but I would think you may see a ridge or feel it and I would like that. I haven’t had any issues and as it is safe I always let them cure fully for 30 days before I sell them.
@katbaldwin4664
10 ай бұрын
How did you make the holder for the cup
@susanhunter626
3 жыл бұрын
I have two questions: What is the device you are using inserted in the cup in order to spin it and handle it easier? Is the sealer applied all the way to the rim of the mug? I wonder if it is safe when drinking? This tutorial was really helpful. Thank you so much!
@TSRCreations
3 жыл бұрын
Hi Susan! The handle is a part that comes with a cup turner, I make resin tumblers. All it is is a piece of pvc pipe with a foam football on the end. It’s a great tool for these. The sealer can be applied all the way up or just on the inks. All these sealers are fine for everyday use after they have been cured for a full 30 days, per their websites. But if it worries you just tape off the rim! Thanks!
@francynroy2231
Жыл бұрын
hi, where can i find the tool that you put in the mug to stand and turn this one, you do georgous things, thank you
@TSRCreations
Жыл бұрын
That is an arm of a cup turner. they have them on Amazon. or you can get a piece of PVC pipe and a foam pool noodle or small football and slip it on the end.
@1990golla
Жыл бұрын
Eine frage kann ich diese Art auch mit Harz versiegeln und ist sie dann spülmaschinenfest l.g Danke im vorraus
@TSRCreations
Жыл бұрын
You can seal with resin but after you spray it first! The resin can reactivate the inks. I do not recommend dishwashing to my customers.
@tammyflagtwet7581
3 жыл бұрын
You’ve videos are amazing. Thank you for posting them. I know there have been a lot of questions about sealants. Just to make sure I understand. You use Kamar Varnish, then Crystal Clear, then UV Archival then Brite Tone? I have seen so many comments on various blogs about the alcohol inks coming off even after sealants applied. I appreciate your clarity for sealants. I wanna be able to use the cups I make or give as gifts.
@TSRCreations
3 жыл бұрын
Hi thanks so much! So I always spray with either with 2-3 coats of Krylon Kamar varnish then 2 coats of UV archival spray also by Krylon. Sometimes I use the Brite tone not always, it depends on the look I am going for and on how glossy I want them to be. If I do not use the brite tone, I spray a third coat of UV spray. I always tell customers to hand wash these only to keep them looking there best for longer. I try to stay away from the very rim with the varnish, but always let your cups cure for 30 days before selling.
@tammyflagtwet7581
3 жыл бұрын
@@TSRCreations thank you so much for replying. It’s very refreshing to have a professional have the passion for their trade to actually take the time to reply. I appreciate it very much and am already sharing your video with friends! May your business be overwhelmingly successful!!!!
@TSRCreations
3 жыл бұрын
Thanks so much Tammy! ❤️
@birdiepareagle
3 жыл бұрын
How long do you wait in between layers of Bright Tone and how many layers do you put on? Love your art!!! Thank you for sharing!
@TSRCreations
3 жыл бұрын
Thanks. I wait a day between layers. I do at least two coats.
@lorimcgarrity8582
Жыл бұрын
Thanks so much for such a great tutorial. I've done some pretty alcohol ink and Marabu marbled coffee mugs and I used dishwasher mod podge on them but even just hand washing most of it has come off within a year. Do you think these sealants you are using are more permanent? I use the Krystal clear on canvas but haven't used it on china. ?
@TSRCreations
Жыл бұрын
Definitely need to use Crystalac to seal these. I have a coupon code in my description if you want to give it a shot.
@AntoniyaArtistry
2 жыл бұрын
Beautiful. So you don’t use Krylon Kamar Varnish at all, just Krylon Crystal Clear and UV?
@TSRCreations
2 жыл бұрын
Yes i use the two sprays then the brite tone Thanks!
@clemencequelennec4828
3 жыл бұрын
Amazing tutoriel ! I have a question, after it painted and sealed, can i use the cup to drink my coffee everyday ? is it safe ? thank you very much
@TSRCreations
3 жыл бұрын
Yes as long as you let it cure for 30 days. I use mine everyday.
@LegerKathy
3 жыл бұрын
These were gorgeous!! and I had to freeze the video at one point to see your bracelets!!?? did you also make those??!!!
@TSRCreations
3 жыл бұрын
Yes I make them form the paint drippings! Thanks!
@LegerKathy
3 жыл бұрын
@@TSRCreations Where did you find the bracelets?
@TSRCreations
3 жыл бұрын
@@LegerKathy I got them from Ali express a.aliexpress.com/_mMbXyHX I have a video it’s #107 showing some other jewelry not these but a cuff bangle bracelet if you are interested!
@LegerKathy
3 жыл бұрын
@@TSRCreations Oh thanks and great.. I had scanned your videos but it didnt jump out at me I guess! Thanks again
@lizhamilton5934
3 жыл бұрын
I really love the first blue one. Thanks for the video. I will try the brite tone. Wondering iif I have to spray it first? 😊 Thanks
@janepeake8785
2 жыл бұрын
Hi have you tried Modge podge dishwasher to seal your mugs? Thanks
@TSRCreations
2 жыл бұрын
I have not only because I found there to be too much streaking, which I can’t stand. But i have heard others using it with good results.
@kellysmith1800
2 жыл бұрын
do you have to sand before hand?
@TSRCreations
2 жыл бұрын
No i just clean the mug with alcohol. Then between coats of brite tone I will sand a bit
@leaettabrooks4349
3 жыл бұрын
I just love your art work! May I ask a question? Why did you use deco art satin enamel and not a house paint satin enamel? Is there a difference?
@TSRCreations
3 жыл бұрын
Thanks so much. No reason, its just what I had but, either will work for this technique.
@carolmccollum9341
3 жыл бұрын
@@TSRCreations Didn't see you use deco art satin enamel (or house paint satin enamel) on either of these mugs. Was that reference to another video??
@lizhamilton5934
3 жыл бұрын
Can I ask where to get that type of mug? I love the shape!
@TSRCreations
3 жыл бұрын
These I purchase led from Marylandchina.com
@englishtechnology1324
3 жыл бұрын
Nice work ,, I have one question plz Is this ink permanent or temporary , any light or water effect ?
@TSRCreations
3 жыл бұрын
It’s permanent after sealing. Hand wash and keep away from direct sunlight.
@englishtechnology1324
3 жыл бұрын
@@TSRCreations Thanks a lot Plz let me know about sealing with which kind of materials ?
@janathomas5759
3 жыл бұрын
Nice video. You put the Bright Tone on the lip of the cup????
@TSRCreations
3 жыл бұрын
Thanks! Yes I did, crystalac is safe to use, according to their website its FDA compliant, non toxic and safe to use when dry. I always let them cure completely for 30 days.
@janathomas5759
3 жыл бұрын
@@TSRCreations Thanks. Just making sure.
@vickiecopeland7131
2 жыл бұрын
Are those cups with those sealers safe to drink out of?
@TSRCreations
2 жыл бұрын
Yes after a 30 day curing process.
@ReneeW59
3 жыл бұрын
Nice mugs! I have questions. When you seal, do you spray the crystal clear without doing Kamar first to sent the ink? I find that the crystal clear can activate the ink. I noticed you sealed right up to the lip of the cup. I thought nothing was supposed to go where the lips will touch. Is Crystalac actually food safe? One more question, what do you have jammed in the mug that you're holding onto? Thanks!
@TSRCreations
3 жыл бұрын
Yes I always spray the mug to seal it first with Kamar. Crystalac is non toxic, safe for use and food grade. I always let mine cure for at least 30 days before selling or using. The handle In using is a piece of PVC pipe with a foam football or pool noodle on the end. It came with my cup turned that I use when I make custom stainless steel tumblers with resin.. Tbanks!
@ReneeW59
3 жыл бұрын
@@TSRCreations Thank you!
@carolmccollum9341
3 жыл бұрын
@@TSRCreations in this video you made no mention of Kamar.
@TSRCreations
3 жыл бұрын
@@carolmccollum9341 hi Carol. At min 12:15 I mentions using. Krylon spray and UV spray prior to using the crystalac.
@reneeklamot6829
3 жыл бұрын
I did an alcohol ink mug and sprayed 2 coats of kamar varnish and when it was dry I put resin on it and it wouldn’t go on smooth and it was hot! My resin has never been hot. So I have polycrylic is that like the brite stuff? Is polycrylic food safe?
@TSRCreations
3 жыл бұрын
How long did you wait until you resined the mug? Had your resin been miced longer than usual? I like the brite tone its eco friendly and safe. Im not sure about polyacrylic.
@reneeklamot6829
3 жыл бұрын
@@TSRCreations like more than a month for sure
@astridgonzalez6700
2 жыл бұрын
I tried this and when applied the acrylic spray the inks activated again and started to flow and mix and it was a mess. Why did that happened?
@TSRCreations
2 жыл бұрын
What spray did you use? The Kamar Krylon? Make sure its water based
@joannecrombie6184
3 жыл бұрын
I’ve tried both kinds of varnish and spray and the ink flakes off.
@TSRCreations
3 жыл бұрын
Really? I use a cup I made for myself every day. Do you use several layer of spray/varnish? Hand washing? Or do you mean it’s flaking off prior to use?
@tinaaltenau6669
2 жыл бұрын
Do you have a problem with your Brite peeling and chipping off after a few washing my cup have 8 layers of Brite tone each and I let them sit cure for 30 days I let my ink gas off for 48 then sprayed them and waited 48 hours more I'm so frustrated
@TSRCreations
2 жыл бұрын
I have mot had any issues. I use several thin coats. I did notice if it was too thick it was streaking and a little clumpy. I spray them first then add the brite tone
@tinaaltenau6669
2 жыл бұрын
@@TSRCreations thank you
@birdiepareagle
3 жыл бұрын
Great video - thank you so much. I'm presuming that with the Kamar these are washable by hand - what about microwaveable? I would think not but figured I'd ask. Thank you!!!
@TSRCreations
3 жыл бұрын
Definitely hand wash. The cups are ceramic and can get hot in the microwave so probably best not to. 😊
@ladylira4910
3 жыл бұрын
What did you put in cup to hold and turn it?
@TSRCreations
3 жыл бұрын
It’s a pvc pipe with a piece of pool noodle. They came with my cup turner when I make tumblers.
@JohnPaulsmommy
3 жыл бұрын
Where can you purchase the Brite Tone from?
@TSRCreations
3 жыл бұрын
Crystalac has a website I think there is a link in my description but here is one epoxyfreelifestyle.com/products/crystalac-brite-tone-instrument-finish-waterbased-polyurethane?variant=38502040535191&Google%20Shopping¤cy=USD&gclid=CjwKCAiA1eKBBhBZEiwAX3gql6MT8YSBxw2PImhGrliIcECmee8i6Zzobn-8CJiBEHIKom8UoJ356RoCp5MQAvD_BwE
@blairiris
3 жыл бұрын
Is the brite tone food safe?
@TSRCreations
3 жыл бұрын
So the brite tone claims to be be food safe. I always let mine cure for at least 30 days before selling them or using. If you are concerned about it just coat the inks and don’t go to close to the rim with whatever product you use. Thanks I hope that helps
@gagato4boys922
2 жыл бұрын
That was confusing did you spray one cup and then all of a sudden start painting a different one
@TSRCreations
2 жыл бұрын
I wanted to show that you need to spray and seal them first at least that is what i like to do. So yes i sprayed one which i like to let dry for a couple days before sealing with the cyrstal lac britetone. So for the sake of the video i grabbed another I had sprayed a couple days before! Sorry if it confused you! Thanks
@dawnmiller6899
2 жыл бұрын
I can’t believe you put that brite tone up to the top where the lip touches. Brite tone is for musical instruments originally and has been used for canvases with quite a few issues mostly crazing and crackling even with very thin coats. Not always but enough to know it’s a risk that could ruin your art and should definitely not be put where anyones mouth will be. Disappointed to see you use it even if you say you have never had an issue.
@TSRCreations
2 жыл бұрын
Many artists use the brite tone for these items. Per their website “Food safe when dry and FDA compliant but not FDA approved” FDA approval is very hard to get so that is common. I have used it on paintings without any issues as well. Here is a link to their website if you would like to research more.
Пікірлер: 100