Part list for the shown hyperspectral imager: 200 spectral channels, ca. 1500 spatial pixels, 400-800nm spectral range.
2x Tamron F25 Lens M117FM25 (RMAElectronics)
1x Tamron F50 Lens M117FM50 (RMAElectronics)
1x Edmund Optics #45854 beam splitter
1x 9.5mm long, 50um wide, 50um thick slit on a 20mm diameter disk
1x Edmund Optics #11509 FLIR Blackfly USB camera
1x Edmund Optics #86770 USB cable for the camera
1x Edmund Optics #46075 diffraction grating
1x Edmund Optics #69209 shortpass filter
2x Edmund Optics C-mount adapter #03618
5x 3D printed parts (housing top, bottom, slit mount, filter spacer, forelens mount) grabcad.com/li...
Негізгі бет Ғылым және технология $1600 DIY Hyperspectral Imager Optical Simulation FRED - Part 3
Пікірлер: 9