Here are a few I even continue to remind myself: 1) It's ok to make mistakes. 2) Dry fit before you glue/screw/nail 3) Measure twice cut once 4) You can't hold it tight, use a clamp/vice 5) It will take longer than you expect
@logicalChimp
5 жыл бұрын
If you're doing something more than once, consider making a jig first (even if just two bits of wood screwed together) - makes it *much* easier to e.g. make repeated cuts of the same length / angle, or get consistent spacing, etc.
@WebInvasion
5 жыл бұрын
And keep your fingers away from danger
@santadorkk4862
5 жыл бұрын
#5 truly is the most important one for any new woodworker to remember. KZitem shows projects being done it about 15 minutes. NO!!! Hours! Days! Sometimes a whole week. Time is cruel but do not let it defeat you.
@sikkepossu
5 жыл бұрын
@@santadorkk4862 What?! How quick woodworker are you? A week? No! Even the simple 1' x 1' cupboard takes several months. 😂
@santadorkk4862
5 жыл бұрын
sikkepossu Delusional. From picking the wood up to stain I though I could finish a full size platform bed with storage in 3 days. Well that didn’t happen.
@axchem22
4 жыл бұрын
“If your are completing a project with wood, your are a wood worker”. Best quote ever. Many Thanks for supporting Rookies. 🙏🏻🙏🏻
@Cyberpuppy63
3 жыл бұрын
Does my cheap, pinewood table count? Hehe. I made it under $20. With 3 coats urethane. Top included.
@Cyberpuppy63
3 жыл бұрын
With 1 exception: the top still needs those "side washers" with a figure eight.
@axchem22
3 жыл бұрын
@@Cyberpuppy63 it does count :)
@benl6121
5 жыл бұрын
Loved the positive, anti-elitist encouragement here. Very excellent video. Thank you.
@gungasam3000
5 жыл бұрын
That's what hooked me, too!
@wheeliebin18
5 жыл бұрын
Agreed. As someone who is hoping to get into this as a hobby, it was refreshing to hear and reassuring that even if I screw up, everyone starts somewhere.
@thataintnomoonsucka
5 жыл бұрын
Exactly. The venom on YT is real. Need more positivity.
@jennifer7685
5 жыл бұрын
He's the Bob Ross of carpentry!
@Laffy1345
5 жыл бұрын
@@jennifer7685 happy little clouds...You're right.😂
@307outdoors8
4 жыл бұрын
An old carpenter friend told me years ago " a good carpenter isn't the one who makes the least amount of mistakes but one that can hide the mistakes the best"
@aarongibbs479
Жыл бұрын
My dad had a similar saying. Masters are not masters because they are perfect but because they know how to fix their mistakes
@thegardenofeatin5965
Жыл бұрын
Adam Savage uses the phrase "hiding the crimes."
@goldenzion
28 күн бұрын
A classic guitar player friend of mine once said "Professionals are not those who don't make mistakes. They just make fewer and when they do, they do not stop; they continue from there".
@FlySwann
5 жыл бұрын
Another tip for beginners. Go to goodwill or thrift stores to get damaged furniture cheap then fix it and sell it. You'll learn tons trying to copy the original look. And you may even make a little change doing it to fund your bigger project.
@GregNickoloff
5 жыл бұрын
I like that. Good idea.
@dannyoktim9628
5 жыл бұрын
GREAT TIP been re-hacking furniture for years, cut the legs shorter, add a draw, best way to learn and U can't screw it up. . . .don't like it , sell it as a project. win win
@the-mush
5 жыл бұрын
sounds like real fun! never thought that...
@PaulChristenson
5 жыл бұрын
SAD thing is that Goodwill Industries USED To TEACH furniture repair to its workers by doing just that...but the quality of today's furniture is mostly stapled junk...:(
@lobitome
5 жыл бұрын
And if nothing else, you may get some decent wood and hardware for a fraction of the price of what it would cost normally.
@TroyTurnerHifi
5 жыл бұрын
Something my wood shop teacher used to always say that stuck with me: "If you want it done faster, slow down." I would wager 90% of the mistakes I make are from rushing something. Now I've got to take even more time to fix the oopsies. The great thing about hobbyist woodworking is you aren't under the pressure of a deadline. Take the time to enjoy every step of the process.
@Gravattack
5 жыл бұрын
That is really good advice. Rushing causes mistakes that end up taking a lot longer to fix, or worst case some catastrophic accidents.
@nancyfahey7518
5 жыл бұрын
Yes, thanks for that. I'm gonna make a wooden plack and hang it in the shop. Right above "count fingers before and after projects".
@MiauxCatterie
2 жыл бұрын
reminds me of something a boss used to say. "a lazy man's work is never done." i think of it any time i'm rushing.
@noahark1822
3 жыл бұрын
I am just starting out making things out of wood since I moved into my own place. I used to watch my male relatives make things like porches or tables and be told I wasn't able to do it because its a "mans job." Watching your videos really helps me stay motivated and remember that I can do anything I want to do, it just takes work.
@ForTheChristians
Жыл бұрын
How are things going now?
@LinhNguyen101010
4 жыл бұрын
"Don't point out your mistakes" Thank you for this! My first bit of woodworking ever was making a stand for my brand new table saw over the weekend (bending over to cut wood isn't very good for the back). It's not very level, or sturdy, but I'm low-key proud of it.
@ML-sc3pt
Жыл бұрын
Unless it's to a customer. Then it may save you a lawsuit
@maleahlock
5 жыл бұрын
When I started out I had so many guys telling me I was doing it wrong (no solutions, just wrong) or using the wrong brand, or that what I was making was just girly crafting not woodworking. I wish I had been able to hear your speech about ignoring the naysayers back then. Your words have reminded me to be an active encouragement to those around me and drown out the insecure haters. Thank you!
@ishanisule4792
4 жыл бұрын
I have taken up woodworking about a year ago. Everything you mentioned here is so relatable! Watching most of the vidoes on KZitem gives me an inferiority complex. This gives me hope that I can build almost everything in my modest shop! Thank you so much, you are amazing!
@rays.5800
5 жыл бұрын
Steve spot on! About 4 1/2 years ago my oldest daughter got pregnant, a idea popped in my head I need to build her a rocking chair. I was 52 and had not made a piece of furniture since high school. I did some research and decided on a Malloff style rocker. I started and quickly realized I did not have the skills or expertise, so I watched you, and some other maker on KZitem. You thought me and inspired me, your no nonsense way of explaining things help make it to the finish line before Eli was bore. There are many mistakes in it but no one sees them they just see a beautiful piece of furniture. Thanks for all your help!
@jannezack
4 жыл бұрын
Thank you!!! I don’t have a huge budget for tools. I’m never going to be a professional so I bought some Less expensive tools to build out a series of boxes to make a camper in the back of my truck. I’m OLD and just want some tools that will last a few years. I don’t feel badly now that I went cheap(er). I grew up with 2 woodworkers in my life and though I’m really late to the game I have wanted to do this for too long. I’m biting the bullet and doing it! Thanks for your encouragement!
@danieltaylor8347
5 жыл бұрын
I like the message of this video. Great information to any and all working with their hands. Thanks for doing this.
@SteveRamsey
5 жыл бұрын
Thanks Daniel.
@CDN_Torsten
5 жыл бұрын
I agree with you Daniel - this is a great message. This isn't about the tools, this is about being creative and building stuff that is unique. I've been doing this for many decades and it's a wonderful hobby that doesn't need to be expensive.
@pawemichalak6275
5 жыл бұрын
Man, you are made for this. I'm watching woodworking youtube channels for last year and it seems to be so easy and enjoyable for you. dont stop uploading. thanks for sharing your knowledge.
@thomasgough1451
4 жыл бұрын
Paweł Michalak Amen amen and amen
@twiggs0
4 жыл бұрын
Steve - I'll be purchasing a house as a 34 year old in a few short weeks. I've always had an interest in wood-working because it's hands-on, and that's how I learn best. The house has a basement shop space, as well as a two-car garage. To mitigate dust-collection issues, I'll probably find a different use for the basement space and go with the garage. To the point - I posted about my excitement in r/woodworking that I'd finally be out of renting and into owning a home, and that said home had space for wood-working, and asked for recommendations for woodworking resources. Overwhelmingly, you came up. I can clearly see why. You have an inspiring presence, you are incredibly positive and welcoming for new people. I've been watching all of your beginner videos, and with each passing minute, my excitement to get started sets in deeper. If you've got any haters, it's because your attitude exposes their ego. Keep up the good work, and I look forward to making that first cut on my journey into this new and wonderful arena. Thank you for spending the time to share your space and knowledge.
@eswift8318
4 жыл бұрын
I've experienced (but never owned) both styles of shops. Garage is better except for one HUGE exception. It is often hard to keep a garage shop as a functional garage shop, especially if you don't live alone. Little by little stuff creeps in and piles up on your workbenches and storage areas. The same can happen for a basement, but if there's a space in the basement for the other stuff to pile up, it's usually going to end up there. Also, it's good to clean up sawdust in general, but sawdust getting all over that extra junk will deter people from putting their junk in your shop.
@jimmcdiarmid7308
4 жыл бұрын
Twiggs McGee don’t neglect dust collection, very important
@johnthompson5370
3 жыл бұрын
I use my 2 car garage. All of my tools, including my table saw fold up and out of the way. I don't have a traditional work bench. I use a Workmate with a 24x36 too I hold on with c-clamps. I also use old kitchen cabinets for my workspace. The bonus is all of the storage for tools they hold. I found the cabinets by picking others "junk" on trash collection days. There is also a habitat for humanity warehouse locally. My latest cabinet has 4 drawers and cost $10.00. Can't beat it
@fnelowet
3 жыл бұрын
Something that I learned when setting up my workshop is to use 3" casters. The larger casters roll so nicely you'll thank yourself every time you move a tool.
@thegardenofeatin5965
Жыл бұрын
I use 4" casters. My workshop is so small that several of my benches have to go outside on a regular basis for use.
@thespanishpipedream413
5 жыл бұрын
"The other 25% are live edge resin river tables". This is going to make me laugh all day.
@rouge5140
5 жыл бұрын
the sad thing is that it's true. of all the rive tables i saw the only 2 i liked were one made from aluminium instead of resin and one thag was actually a shelf that lit up wit led lights for a child's room
@gorkyd7912
5 жыл бұрын
LOL, my thoughts exactly. Every time I see resin furniture I'm thinking if I wanted plastic furniture there's Walmart down the street.
@teiaperigosa
5 жыл бұрын
had me dyyyyying lmao
@davejoseph5615
5 жыл бұрын
On my very first trip to Woodcraft and I heard someone in the back talking about a resin river table.
@NobleNobbler
5 жыл бұрын
I lol'd when I heard this
@RR-gw2uj
5 жыл бұрын
This video is so true. I built a wooden gate for my deck with only a hand drill, a jigsaw, and a coping saw. I see hundreds of people on Reddit posting pics of their brand new thousands of dollars worth of tools, yet they make nothing with them. They all post pics of their fancy, massive shops, which never have any ongoing projects in them lol. I built my gate on a small foldable table next to my washing machine. Great vid!
@williamobrien2107
4 жыл бұрын
Great video overall, it shows the wisdom of a lot of experience. Here are some points from my experience: 1). I agree the woodworking projects don’t provide the cheapest option for a piece of furniture. I have found that it provides a high quality piece of furniture at a price that is competitive with the cheapest discounts store option. 2) Don’t buy large sets of tools like drill bits. You don’t need every size graduated up by 1/16th of an inch. There are probably 3 or 4 sizes that you will use repeatedly use so buy those. I keep a multipack of 1/8” drill bits because they sometimes break and I use them a lot. Then 1/4”, 3/8” and 1/2” tend to be fine for almost everything else. The same advice goes for router bits etc. other sizes should be baught individually as needed. 3) “Incorporate it into the design”. Is what I was taught early on by ole’ Coach Tuttle. That means that if you have a flaw in the wood like a knot or you ding it up in some way then seek to incorporate the flaw into the design of what you are building. There are limits to this but in general it works like a dream, particularly for funky wood coloring or grains. 4). When buying pine lumber it is better to buy from 84 Lumber or local lumber yards. Their wood is much more stable than Lowe’s and HD. The big box stores want to offer wood with minimal knots so they take the cuts from the middle of the tree which is the least stable wood in the tree. If it is straight in the store it is because it has been strapped in a bundle so when you get it home and let it set for a day or two it will no longer be straight. 84 Lumber and local lumber yards have the better wood cuts for stability. This is primarily an issue with 2-by wood dimensions. I hope this helps someone.
@ebrooks24711
2 жыл бұрын
Thank you so much for the tips. I just inherited my dad's woodworking tools and I'm having a blast. He is my biggest encourager. I love how you said don't point out your mistakes. My biggest issue right now is that I can never line up the screws perfectly, but you mentioned a laser, great idea. I also have noticed , because the price of lumber has skyrocketed I look for wood everywhere. The other day my son and me were driving and this huge truck just started dropping off two by fours on the highway. I looked at my son and said let's pick it up! He said mom we are in the Miata! Thanks again
@antonioibarra9890
5 жыл бұрын
I am just 52 years old when I start carpentry and your advice is very valuable. Every day I feel safer. Aguascalientes Mexico
@stevep9707
5 жыл бұрын
51 in Northern Ireland and just starting too
@koconnor
5 жыл бұрын
59 in England. Moving to Panama in May. I will be starting when I get there.. I've started buying some hand tools to take with me.
@jayrob7418
5 жыл бұрын
@@koconnor holy shit Panama!?
@jayrob7418
5 жыл бұрын
42 from Chicago and just starting myself. Parents from Guadalajara so we're practically neighbors.
@josemerlinmacapagal7345
5 жыл бұрын
im turning 58 but i started young doing simple carpentry its only now im developing my skill to DIY woodworking projects...gradual buying of woodworking tools..expenses are inevitable..got to learn more guys!
@sttk913
5 жыл бұрын
I've been working with wood for about 10 years now and I just started my first epoxy project, and quite frankly I found the prospect pretty daunting. But watching this video and reading the comments has kind of put the wind back in my sails, so thank you for that. Time to get back to work!
@PMichaels
5 жыл бұрын
Awesome video, Steve! I love this advice. Far too many woodworking snobs make beginners feel bad for using pocket screws, paint, etc. Your approach is great and I hope all new woodworkers see this video. Keep up the great job you are doing! 👍🏼
@BradfordNeedham
5 жыл бұрын
My favorite tip: when buying pine boards at that blue or orange store, look down the long edge of each one and pick the straightest ones. Your work will be much better if you start with reasonably straight boards. P.S., I do go ahead and buy bent boards sometimes when the bends won't make any difference in the project.
@brianmurray667
4 жыл бұрын
Sound advice. You’re one of the best when it comes to “fine woodworking”and a sense of humour.
@tylersmith293
4 жыл бұрын
Love how positive he is about everything.
@spencerabdo9868
5 жыл бұрын
Aaaaaand this is why Steve is in my top 3 favorite woodworkers: Something for everyone, not a snob and very encouraging. I do both woodworking and wood turning (arguably the same thing) and I always love the ease and accessibility of Steve's approach. Thanks for another great video, Steve!! Also, pocket holes are great.
@vatsaladharani3642
4 жыл бұрын
I love u Steve Ramsey!!! You make anyone believe in themselves. Thank you for that! And thank you for the video
@neensgoldman4178
Жыл бұрын
Steve, thank you for being so encouraging and bringing lightheartedness to this craft, coming back to the essentials - building stuff! The world is a big place, there is so much for us to get angry with - it shouldn't be how people put tables together!
@mightyporky
5 жыл бұрын
Great advice Steve, I have to agree with you about the tools. I have many but use only a few constantly. I still make a living woodworking at 75 years old. I began as a young fellow ( about 10) by building a wooden boat using the tongue and groove 1x6 my dad had earmarked for his garage attic. Of course it filled with water but after a couple attempts I did seal it up and used it in a nearby creek. Failure is experience and experience is valuable knowledge. I have built complete homes hands on, but my all time fav has to be that boat.
@benhardy397
5 жыл бұрын
I used @TheSketchUpEssentials . There is alot of content but if you look through the playlists he really covers the basics well. kzitem.info/news/bejne/o5Bj24SAhaqSqWU.
@elim4605
3 жыл бұрын
"You can have a fully functional woodshop in the space it takes to store a lawnmower and a few bikes" Me in my apartment looking up at my ceiling-stored bike: 😮
@MFTomp09
2 жыл бұрын
I’ve seen dust collection setups that use a boom arm that swings out from a wall at ceiling height to give you dust collection from above. I’ve also seen shelf systems that fold down from between the rafters and can hold your smaller hand tools. It can definitely be done. A small table to hold a miter and job site table saw and the rest of your tools like drills and sanders and circular saws stored above in the ceiling or on the wall and a dust collection setup next to the table.. A very efficient shop setup for smaller projects.
@iwontliveinfear
4 жыл бұрын
"There are no mistakes, only happy accidents." - Bob Ross
@Auriflamme
4 жыл бұрын
Trust me, I was a mistake, definitely not a happy accident.
@ALCRAN2010
4 жыл бұрын
"And this happy little tree will live here, until the woodworker comes to chop it down." - Bob Ross, maybe.
@jakobvanklinken
3 жыл бұрын
This quote always makes me slightly aggressive
@nickpunchh
2 жыл бұрын
Hey there, can honestly say that I can count on one hand the amount of comments I’ve left on KZitem videos. And I watch a ton. Maybe too many… You’re humble, straightforward, honest, and brave. Thank you for your amazing efforts to make content. In a sea of clickybaity, sponsored, in-your-face videos, yours are exactly what they need to be. Informative, honest, and important. I’m learning a lot from you and appreciate you. Thanks so much, Nick
@mountainlife2411
5 жыл бұрын
This made me feel less lame about being proud of my super simple boxes I just made.
@alj9023
5 жыл бұрын
I've been woodworking since i was a MICROJIG! MAKER OF THE GRIPPER
@CrafterMaker
5 жыл бұрын
🤣😂🤣
@TheMrAshley2010
5 жыл бұрын
+
@darfboony824
5 жыл бұрын
I miss those ads.
@yanivbitan4768
5 жыл бұрын
He should totally delete this video, and upload new one with this sentence
@PeppersPlantsnPowerTools
5 жыл бұрын
Ebaa Dabbour 😂😂😂😂😂😂😂
@RCPoliComm
5 жыл бұрын
I love your attitude and approach. I 100% agree with every single thing you said here!! If you built something out of wood, you're a woodworker!!!
@nickturner4150
4 жыл бұрын
What a likeable chap. Subbed. I've got a pallet dump next to me (free wood) so started making during lockdown with a clawhammer, hand saw, drill, some sandpaper and a tin of stain. Made 2 shoe racks, a coffee table, headphone stand, workbench, media centre and now starting a keyboard flight case (all screws, by the way!). The sense of satisfaction and well being I've experienced from breaking down pallets, doing little drawings then trying to bring them to life is one of the most life-affirming things I've ever done. It's healthy for the mind, body and soul. It was a pastime that quickly became a joy and now is turning into a passion. This gentleman confirms that.
@scottharmon709
5 жыл бұрын
When I started woodworking, I was too stupid and arrogant to understand that I was actually BAD at it. Yes, I was making what I thought was good stuff, but my repertoir was limited to butt joints and miter joints that were sometimes even accurate. I'd see other joinery techniques in magazines, on TV, and on places like FB, but they looked difficult and I am basically a lazy person, so i never tried them. I'd proudly show my stuff off to my relatives and they'd be impressed...except for my BIL, who used to build cabinets for a living. I just thought he was being a jerk. I signed up for the Weekend Woodworker course the second time it was offered, because it intrigued me and I liked the way that Steve seemed to be down to earth on his videos. I mentioned to my BIL that I was signing up, and he just kind of shrugged. Again, I thought he was just being a jerk. Well, I completed all of the projects and finished the course! In the process of doing it, I definitely learned many good techniques and it helped me realize that "way back when," I really was stupid and arrogant when it came to woodworking. Since then I've been producing some nice pieces of furniture, some of which were commissioned from friends and neighbors, and I've been pushing myself to learn more. And my BIL? I ended up realizing that I had been building crap in the past, and he was just being tactful instead of being a real jerk about it. This last Christmas, after I showed him what I'd built during and after the course, he told me, "I really didn't think that you'd get anything of worth out of an online woodworking course. It looks like I was wrong, because you have definitely improved over the last year." That works for me!
@blasty290
5 жыл бұрын
Steve's courses are worth every penny.
@TheIdeasGuy
5 жыл бұрын
What is a Bil?
@scottharmon709
5 жыл бұрын
@@TheIdeasGuy Brother In Law
@Orxenhorf
5 жыл бұрын
I think it was Christopher Schwarz quoting some historical text where I heard this but ... There are only two forms to furniture that you need to be able to make: the box (drawers, cabinets, etc) and the platform (dining tables, chairs, desk tops, coffee tables, etc).
@MarkosHaas
5 жыл бұрын
I’d add the chair. Whole different animal.
@D-OveRMinD
4 жыл бұрын
"You wanna be a woodworking purist? Go chop down your own tree first." - Steve Ramsey
@stevennicholas5472
4 жыл бұрын
Here, hold my beer - Nick Offerman
@DebbyDonnelly
4 жыл бұрын
Sounds like experimental archaeology to me!
@brucea550
4 жыл бұрын
There’s more than just humor there. I start with a husqvarna chainsaw, cut the tree, mill it on a woodmizer and then make something in the shop. Very satisfying to take a tree and make it into a table or jewelry box.
@garywheeler7039
4 жыл бұрын
Nah. If you really want to do it right, first you plant the tree!
@frankchen4229
4 жыл бұрын
@Mike Dorman this is going to a paradox debate soon....
@migueldelgado1
4 жыл бұрын
Steve, I work in petrochemical industry for over 25 years, building pressure vessels, reactor, valves, structure, now I'm in inspection. some years back I got bore, so I decide want to try wood for hobby (which for me is more hard, you can't just weld, grind and fix the error... wood is a different animal). after a few years making mistakes (still do) on wood, I look back in time & I noticed that on all my life experience in petrochemical industry, I was always stressed . I learn that nothing is perfect but me having this new hobby it make me more confident, more accurate & more important, self confidence & stress relief. This video has made me understand that it doesn't take much experience to do something great, but if that something works for you and people appreciate it, it makes you more sure of yourself every day. Thank you !
@greywolf369
4 жыл бұрын
I've always been interested in taking up woodworking, and you've given me the positive push to go for it, Thank you 🙏.
@islandinthesky
3 жыл бұрын
Just getting into woodworking and as a professional photographer, it’s hilarious how parallel these insights are. The elitism in any craft field seems to be a problem... that said, your video is very encouraging. Thank you!
@carenecitter2435
4 жыл бұрын
I’ve never been more glad to have stumbled across a video on KZitem. You remind me of my late father, positive, funny, helpful and kind (to say the least). Thanks for making and sharing this video!
@olivepressdesign
5 жыл бұрын
Only Real woodworkers watch other woodworkers doing woodworking on KZitem videos instead of woodworking and love doing both just as much.
@nelsonw2096
5 жыл бұрын
olivepressdesign they won’t let me woodwork at work so KZitem takes me pretty close during the week. 😉
@RCPoliComm
5 жыл бұрын
Haha! So true!
@aeratj5741
4 жыл бұрын
Steve, you forgot to mention the fundamental rule of woodworking: " never tell your wife beforehand what you are making. " Because, It will always turn out to be something else after you actually finish the project.
@ultraorange1
4 жыл бұрын
AERAT J that is incorrect, all she needs to know is that it’s for her. Unveil it and what ever she says it is, that’s what it is.
@aeratj5741
4 жыл бұрын
@@ultraorange1 you are a wise man Dan !
@jeremywong9207
4 жыл бұрын
Amen!
@davidduffin2176
8 ай бұрын
As someone that only does this on the weekend for fun, you’ve justified a lot of things for me. Thank you.
@SteveRamsey
5 жыл бұрын
If you've been woodworking for a while, what are some things you know now that you wish you knew when you started out?
@Bloodlust1ify
5 жыл бұрын
If you get angry on a project move to something else. Don't stress out.
@MikeD87916
5 жыл бұрын
Wood is more expensive than you think. Everything always takes longer than you think it will. And sawdust is not good for your lungs.
@PMichaels
5 жыл бұрын
You WILL make mistakes. Learn from them. Even the best woodworker still makes errors and there is no perfect project so don’t be too hard on yourself. Just get better every day. 👍🏼
@taylorwilkinson9860
5 жыл бұрын
Dont glue end grain, its like gluing the end of a bundle of straws to a wall. And if you try that, youll quickly find out its weak as hell...
@TheIntentionStudios
5 жыл бұрын
Don't be afraid of the gotdamn bandsaw.
@stephaniecantarero6782
5 жыл бұрын
You would be so cool to have as a dad. Thanks for your video, it was refreshing
@lucho3410
5 жыл бұрын
I built a 10×12 shed all by myself using all 18v ryobi drill, ryobi reciprocating saw, ryobi chop saw, ryobi hammer drill, and a harbor freight hammer. If u are thinking "its probably weak and ugly", think again! Its all about having confidence in yourself
@AKMAshrafuzzamanJitu
3 жыл бұрын
I am not a woodworker and have not done any work but I love watching your channel. And I love your perspective.
@harrydoherty8299
Жыл бұрын
sometimes it might be a good idea to bring gloves when picking thru lumber. many time i’ve come across cracked or split edges trying to sort thru lumber trying to get that near perfect 1 by 12 etc.
@cookcrazy
5 жыл бұрын
I pretty well agree with everything you say but the rule about buying tools of the same brand "color" is not important... Here I got to say... if your starting out from scratch, planning on cordless tool choice is in my opinion, very helpful in the long run. While it is not essential to have all one brand... it is efficient and less frustrating to do so. (in the cordless world in my opinion brand matters less... it's when you get into the big stationary machines that brand starts to make a difference. Ryobi, Makita, Bosch etc..... the darn drill makes a hole and drives a screw!) I admit I have Cordless tools from several manufacturers, and from several eras as well... and the collection of chargers is, well, a pain in the ass... so if starting out from scratch... try and limit the color to one :-) Having Interchangeable batteries will make you smile!
@SVisionary
3 жыл бұрын
Steve's words of encouragement (in all it's various forms) are endearing and why I keep coming back. What a stand up gentleman and a great wood shop role model.
@annaalm18
3 жыл бұрын
Thank you for your encouraging words, Steve:) I will never point out the flaws of my woodworking projects ever again!!!!!
@D1G1TALSYNAPS3
5 жыл бұрын
Love your videos man! It’s like hanging out.
@chrisgooi
5 жыл бұрын
You are most sincere and helpful! Thank you
@moniquechristiansen6202
5 жыл бұрын
I’m a minute in and hooked. New favorite channel.
@Oh6Torch
2 жыл бұрын
I work for a polyethylene pipeline distribution/fusion machine rental company. We receive and ship out lots of 20-40 ft pipe ranging from 2” diameters to 4 ft. To move these pipes, they are banded together with a 2”x6”x4’ to 2”x6”x8’ boards. Until 3 months ago, we threw them in the dumpster. I’m now storing them in my garage and slowly building a fairly large stockpile of pine. These boards often require a lot of work to get them to a workable state. I’ve found that free wood is not necessary free as I’ve had to buy a planer and jointer (already owned a tablesaw and mitre saw) to be able to use them. Or, I could go to HP or Lowes and submit to their ridiculous prices. It’s a classic case of choosing ones poison. Great video. Always enjoy your upbeat attitude. Thanks for sharing!
@markchisholm2657
5 жыл бұрын
Hand planes. I have every tool under the sun and in the end there is a simple pleasure using a hand plane that's well set up. Not the expensive Veritas ones but instead the Stanley Bailey type that were made by the thousands. They are lighter, cheap as chips to buy and do just as good a job as any other. Learning to sharpen is obviously a good skill and its not some mystical bollocks that some sites, magazines and retailers make it out to be.
@fvu7296
5 жыл бұрын
word.
@1pcfred
5 жыл бұрын
There's sharpening then there's sharpening. When you're really sharpening there is a bit of mysterious bollocks going on then too. Basically if you're not stropping with polishing compound and dropping wire edges you're not really sharpening. When you know what that means then you'l know exactly what I mean.
@nathanjxaxson
5 жыл бұрын
A lot of great messages here, even for the note experienced. Thanks - I think I really needed to hear this.
@KennyWin23
3 жыл бұрын
"I've never made anything that is perfect" be proud of your hard work and creativity. I've discovered there's alot of woodworkers on youtube. This is by far my favorite. So many important things were said in this video. If you're new to woodworking and are looking for a teacher, this is that guy.
@jerryassarsson9584
3 жыл бұрын
Was about to write the exact same thing pretty much. Just got into woodworking after 20+ years as a spray painter and industry worker and watched tons of videos but so far Steve Ramsey is by far my favourite. Really uplifting listening to this guy.
@tomsanders9491
4 жыл бұрын
Remember..."no matter how many times I cut it, it is still too short"
@chrislaird7805
4 жыл бұрын
Remember the golden rule.....measure twice, cut 3 times. The first time you cut wrong it was an accident, the second time you realized something wasnt right so you measured a second time only to realize that your first measurements and your second intuition were wrong so your third cut and second measurement proves that that they only thing your dad ever thought you was right but you keep repeating the same mistake because what does he know 😂😂😂😂
@shokojimhollingsworth3940
4 жыл бұрын
The way the "coffee table" was first invented 😂
@Majerly_Annoyed
2 жыл бұрын
Measure once and cut twice...and it's STILL too short!!!
@BloodyAngel88
5 жыл бұрын
I have to admit, though, I am in love with my router, since I can use it and my hand drill for A LOT of projects. Hell, I even found a tutorial on KZitem and made my own router table for about $10. So you can actually do SOME things cheaply. :)
@lobitome
5 жыл бұрын
I helped my cousin build a router table that he can bolt to hang off his workbench, last week. He hates spending money of decent tools, but wanted to know why not just buy a router table at a box store, until I explained how cheap we could make a custom one and he saw the price of the big box store table. He tried using the router before I could teach him anything about routers, and was getting discouraged within hours. Once I taught him some basic stuff, he wants to know what else he can do with his.
@AlexisHiemis
Ай бұрын
Already subsribed with the first video about pocket holes but now I'm totally sold. I just love your relaxed attitude and positivity and speaking up against gatekeeping is always a win in my book.
@purecuIt
5 жыл бұрын
My tips would be that Harbor Freight tools work fine and are cheap. Building out of plywood with pine saves money as Steve says! Definitely buy a table saw (i got a used one) and a palm sander. Impact driver works way better than a drill for driving screws. Drill pilot holes first! Have fun, most importantly is that YOU enjoy what you do.
@mybar9640
5 жыл бұрын
You nailed it. Thanks for this very informative video. Such a productive hobby indeed!
@brombeertoni7264
5 жыл бұрын
"You nailed it." Nope. He glued.
@taylorwhitt3974
5 жыл бұрын
@@brombeertoni7264 nope, he screwed it.
@path2539
2 жыл бұрын
My first furniture project was an end table I made from wood I had rough cut from a very large tree I had cut down on my property. One of the wood slabs developed a slight curve as wood sometimes does when it is dried slowly in a shed (I did not use a kiln to dry it). When assembling the table I just put a wedge-shaped spacer inconspicuously under one side of the tabletop to fill in the space. No one noticed the defect and the beautiful wood grain and live edge capture the viewers' attention so much the "defect" has not been noticed. So, your advice to not point out mistakes is well taken. Your videos are awesome. Thank you for what you do.
@charlesdibben5938
5 жыл бұрын
My advice: Any small/medium project you think will just take a of couple hours: double that.
@carawestgate
5 жыл бұрын
If I ever accurately estimated how much effort my projects would take, I would never start them.
@Samlol23_drrich
4 жыл бұрын
You had me with “the other 25% are live edge river resin tables”. That’s hysterical
@drneroli
2 жыл бұрын
It's mad how applicable this video is to... well, every flavour of creativity, not just wood working. Top work.
@FlySwann
5 жыл бұрын
Best tip, always buy corded power tools before buying battery powered. It's nice to always have that backup drill or saw if you forget to charge.
@ElocinEnival
5 жыл бұрын
This is so true... or sometime the battery op. tool just can't hack it you need more power... plug in.
@logicalChimp
5 жыл бұрын
I'd modify that, if I could - whilst you're right about forgetting to charge, that's easily remedied... instead, I'd say that the tools you're likely to use for installation etc should probably be battery first, and tools used for 'construction' be corded first... reason being it's a pain trying to drag the cord behind a drill / impact driver when putting up shelves and overhead cabinets etc - cordless are, generally, easier to handle / manouver into tight spaces... Conversely, tools used in construction are going to - mostly - spend all their time in one place, and the extra power / torque available from the mains makes them a lot quicker In hindsight, I wish I had gotten a corded router instead of the battery one (it works, but it struggles on hogging out, etc), and my battery circular saw sees very little use (although I intend to use it in the future to cut wood in the carpark to make it easier to load into the car :p)
@lobitome
5 жыл бұрын
I have several corder drills and only 2 (nearly identical) cordless drills, for this very reason. The cordless drills use the same batteries, so I would recommend having same brands. I have never used a cordless router, but I would recommend (if you use them) a standard router, a plunge router and a trim router. All have are better at one thing or another. One thing I would not recommend, is 18v kits you know the brand, blue or neon green, that have recip saws or circular saws. Those rarely if ever last as long as you need to make a few decent cuts, in my experience. The best brands though, are the ones that do the job for you, and the ones you like. I have several different brands of various tools.
@MISANTHROPE1964
5 жыл бұрын
Better yet, go full on Neanderthal and leaving the electron smashing to production shops “wit a bisket joyner.” My braces and egg beaters are Guinness powered.
@8superman6
5 жыл бұрын
Someone made fun of me for using a not so popular brand of tool in my little garage shop the other day. But honestly like you said, for weekend projects they work just fine. I make cutting boards for Pete's sake. Thank you for your video
@jt13579
3 жыл бұрын
I really like this guys videos and his practical friendly approach. As a beginning woodworker I really appreciate all that I am learning from his videos and that it isn't all about blowing the bank on fancy equipment.
@chadedwards9750
3 жыл бұрын
I am a newish woodworker...4 years. Single best video I have seen.
@SereneHaze6213
5 жыл бұрын
The words my father said when i first start, 'measure twice, cut once'
@sleepyancient6655
4 жыл бұрын
Then curse and start over.
@thomasnewsome5923
4 жыл бұрын
clearly, we have the same father
@masonstansberry2625
4 жыл бұрын
I cut it twice and it's still too short
@SE45CX
4 жыл бұрын
@@sleepyancient6655 When I undertake a big project I first make a list of swearwords. I'm unaware at which step the swearwords have to be applied but when they do I can mark them off and I can still maintain my illusion of progress. :-)
@Darrow1991
3 жыл бұрын
Not to diss your dad, but with me it is measure twice, and before cutting measure a few more times. And even then have contingency plans in place when your piece is still the wrong size.
@MatthewMakesAU
5 жыл бұрын
Princess Meow Meow fan club representing!
@SteveRamsey
5 жыл бұрын
Yay! 👍 😻
@TTButler6793
3 жыл бұрын
I'm so glad I'm not the only one who has said to just put the crappy side toward the wall. Thank you!
@CodeSe77en
5 жыл бұрын
Yeah! More Ramsey goodness!!
@cspann831
5 жыл бұрын
Drawing... HA! I used to make sketches and drawings of what I intended to build. When I was finished, I would tell my wife that it doesn't look quite like the drawing. She would simply say "Well just make a new drawing!"
@capnbobretired
5 жыл бұрын
That woman is a keeper.
@adamperkins6054
5 жыл бұрын
At the end of large construction projects, the contractor is often required to submit "As Built" drawings. No lie.
@lobitome
5 жыл бұрын
My Uncle taught me that technique. Someone asked him why he didn't have plans for something he was going to make. He told them that the plans are in his head, and if it turned out the way he envisioned it, he would draw up precise plans after it was built, that way both matched exactly. I will however do a basic SketchUp, to have an idea of what I want, and print out close ups of different areas of the graphics for reference.
@cspann831
5 жыл бұрын
@@lobitome I'm learning sketchup, getting pretty good at it too but it takes longer to draw the thing than to build it. I missed the boat for CAD I was one of the last classes to learn mechanical drawing with T-squares and triangles in high school in the 70s. I feel like Rip Van Winkel.
@chrissiejohn4316
5 жыл бұрын
@@cspann831 same here...but, by gee, I can sharpen a pencil pretty well still 😉
@fabianbinder3681
5 жыл бұрын
1. Your wife will think you wasted too much time. 2. The finished product won’t be anywhere near your wife’s imagined thing.
@IJurman123
5 жыл бұрын
Pssst, don't let her know when you started making it, if she asks say you did it in 4 hours 😉
@benza435
5 жыл бұрын
And then she points out that you might as well have just bought one.
@MrCliffCross
5 жыл бұрын
hmmmm
@truthspace5525
4 жыл бұрын
@@benza435 I only build things nobody makes, or I can make for less.
@benza435
4 жыл бұрын
@@truthspace5525 I think you're missing the point
@godholio
4 жыл бұрын
I legit laughed so hard at "live edge resin river tables" that I had to rewind to see what I missed.
@maheshchauhan9290
4 жыл бұрын
I am a hobbies house renovator and woodworker for years and I feel you have shared some valid and sensible tips here. Spot on. 👍
@Schererpowerer
5 жыл бұрын
I bet all the thumbs down on this video have a "complete" set of one brand of power tools.
@giorgio84
4 жыл бұрын
Lol
@Katsoup98
4 жыл бұрын
Power tool brand people remind me of truck brand people- those people on your facebook that share memes about how crappy dodge/ford/Chevy are.
@tjsharp5990
4 жыл бұрын
I think the only real advantage to sticking to one brand is so you can use the same battery for multiple tools.
@AGH331
4 жыл бұрын
Yeah, what's wrong with having one brand of tools so you don't have to shell out on new chargers and batteries all the time? It's smart to do your research, then pick a brand and stick with it. It's not so smart, of course, to then go around and argue with others about which brand is best :D
@pshep123
4 жыл бұрын
For battery powered tools, picking a brand makes a ton of sense. But for hand or corded tools, there's no need.
@ryanschoene3358
5 жыл бұрын
While I wouldn't call myself an experienced woodworker I do want to share some of my findings. I think an honest though should be given to hand tool woodworking. I think hand tools are often over looked because either the people that use them are pompous (which is where I think that fine woodworking comment was directed towards) or there is a misconception that you need to be a master craftsman to use hand tools. Hand tools solve two of the biggest problems that beginning woodworkers run into, small space and small budget. I ran into these issues pretty hard when I started. I was a college student living in rentals with no garage or shed that I could use. So I needed all my tools to fit into a plastic bin that I could pull out when it was sunny. I had a table saw but since I couldn't house it it would just rust despite my best efforts. So I switched to using a jig saw and circular saw primarily. This was fine and I made a few projects that way but I still felt limited without a jointer, table saw, band saw, ect. So I started watching hand tool woodworking like Paul Seller (which I highly recommend by the way). You can accomplish a lot more with the amount of hand tools that can fit in a bin. I am by no means a master of hand tools but with them I've learned enough to create awesome things. The best part is the skills you learn can carry over. There are certain things that are either very difficult or nearly impossible to do with power tools that you can accomplish with a few hand tools. They are also inexpensive if you buy from antique stores or stores like harbor freight. The best part I like about hand tools is very often if you are missing a tool and don't want to buy it you can make one for yourself. I know this is a bit of a rant but my main point I want to get across is maybe consider working with hand tools. I'm not a purist but they fit my current needs.
@MrLightPanda
5 жыл бұрын
Ryan Schoene I think it’s a great point. If you’re getting into woodworking for the enjoyment alone, hand tools are quieter and safer as well as smaller and cheaper.
@ryanschoene3358
5 жыл бұрын
@@MrLightPanda agreed. And it's not like your limited to not do the same projects as the ones on this channel it just takes a little longer.
@wisprngwind
5 жыл бұрын
1st rule of woodworking, make a mistake look like you meant it.
@cunkmusic8748
5 жыл бұрын
Like playing a musical instrument.... If you make a mistake just keep repeating it... People think its supposed to be that way then.. 😁
@vincentnelms5987
5 жыл бұрын
Like combat, keep firing, that guy was supposed to get hit multiple times! Lmao
@metalzonemt-2
4 жыл бұрын
We don't make mistakes, we have happy accidents. -Bob Ross
@OsimaniCristian
4 жыл бұрын
But it is not a mistake, it's a very unique feature!
@annettekouba3631
3 жыл бұрын
You are just fun to watch and verrrry helpful! I started woodworking (aged 64 smile) because I needed solutions that IKEA wouldnt offer, like a wardrobe in a small space of the entrance. It all started from here... and I do love my new hobby! Thanks for all your advise. Annette from Bavaria, Germany.
@VideobyHomeworks
4 жыл бұрын
I wish they had a “bunch-o-thumbs-up” button, Steve! One little thumb seems so inadequate... 😉
@howycwap
4 жыл бұрын
I think you need to develop the "winging it" muscle, or you won't be able to adapt and fix mistakes you inevitably make. Purchased plans don't always help with that. You should try to design your own plans or modify bought ones to fit your needs
@PaulPictures
4 жыл бұрын
I think that this is a guy i would love to work with on some projects, like just look at him! He is so happy while speaking to his viewers. Much respect.
@gaborgereben4551
4 жыл бұрын
hey, just wanted to tell you that your content lured me in and your personality made me stay for real. after this vid, I'll jump in and discover your other vids, but duuude!! :D
@MississippiJarhead
3 жыл бұрын
My Granddaddy always said that the difference between a good carpenter and a great carpenter was that the great one was better at hiding his mistakes.
@RodGibsonMusic
3 жыл бұрын
Love your avatar ;)
@josephmartin3279
3 жыл бұрын
Love the attitude Could learn alot working with/for him
@timlansdown988
4 жыл бұрын
I just wanted to say thank you and I always enjoy your tips/advice. I began woodworking about six months ago as part of my physical therapy. I found I have a knack and love it. You've been my go to guy for cutting through the clutter and drowning out the noise. Thanks again my friend.
@BeverlyJLebar
5 жыл бұрын
Please keep reminding people to REMOVE JEWELRY when working with or even around machinery. Losing a finger happens very fast and is forever. This is one of the first things I learned in the USAF.
@lobitome
5 жыл бұрын
And loose fitting long shirts.
@nswinoz3302
5 жыл бұрын
You forgot long hair and lathes( metal or wood). Or am I just a child of the Sixties? NSW in Oz
@jeffb957
5 жыл бұрын
Absolutely. I've been married 31 years, and my wedding band stays in a jewelry box except when we are going out for some social occasion. It almost cost me a finger shortly after we got married, and I havent worn it while working since
@1pcfred
5 жыл бұрын
They can sew fingers back on today. They did surgery on a grape!
@BeverlyJLebar
5 жыл бұрын
@@1pcfred Why not so easily avoid the pain and expense of the surgery, rehab and physical therapy? Removing a ring is cheaper, less painful, and so much easier.
@Arouet-hm1mp
3 жыл бұрын
Thanks. I've barely put together anything, your encouragement is much needed and very appreciated.
@robotmuseum
5 жыл бұрын
Thanks for this video. I am intimidated by "real men" in any shop or manual work environment. I read books and learned how to use my head and sit in an office all day but I don't know how to use my hands. This video made me feel that I can at least try to do this and not worry about what others think.
@jddmmabbott
5 жыл бұрын
Robotmuseum, with the internet as a guide you can do it!! You will fail at times but thats how you willget good at anythi g
@rosiesrun
3 жыл бұрын
thanks steve. I'm just starting out and don't really have any family or friends to look to for advice, so I'm grateful to still have an opportunity to learn thanks to content creators like yourself! Ryan
@odw32
4 жыл бұрын
6:46 So I put my finished table with the top surface against the wall. Now what do I do?
@jlammetje
4 жыл бұрын
Enjoy the beautiful underside 😉
@MrCharles960
3 жыл бұрын
Hat rack.
@k.s.3748
3 жыл бұрын
Use it to hold firewood billets
@carlos8670
2 жыл бұрын
"Don't point out your mistakes... Be proud of what you made". Boy was that a tear jerker. I needed to hear that. Thanks for all the great tips!
@seals70
4 жыл бұрын
Helpful list of tips but even better attitude. As a beginner, thank you for your positivity, encouragement and holistic perspectives.
Пікірлер: 4,2 М.