Great to see the Ford builds . Thank you for sharing.
@JordanDunning
2 жыл бұрын
I love unique combos too, and that 180 degree header setup is too cool!
@ForceEngineering
2 жыл бұрын
Thanks!
@Pistol755
Жыл бұрын
Wow that header setup is SICK!
@jplperformance9073
2 жыл бұрын
Very cool setup and video, thanks
@ForceEngineering
2 жыл бұрын
Thank you!
@spoolinpos
2 жыл бұрын
totally badass dude
@ForceEngineering
2 жыл бұрын
Thanks!
@concreteeee
2 жыл бұрын
Yes please
@Flitzer514
Жыл бұрын
Would a bigger exhaust housing help with the back pressure?
@ForceEngineering
Жыл бұрын
Probably yes, its on my list of things to test.
@michaelallen2501
2 жыл бұрын
It's the only non flat-plane crank modern Ford engine that sounds good thanks ti that exhaust lol. Thing is nasty! I want to build a set of 180° headers for my 97 Z28 so damn bad. They make small block circle track cars sound badass lol.
@ForceEngineering
2 жыл бұрын
Yes they do! Thats is actually what inspired this. When I was younger I raced outlaw late models. Drove a car for a customer and it had 180s. Been addicted ever since.
@michaelallen2501
2 жыл бұрын
@@ForceEngineering I'm really curious what a set would sound like on the 5.2 Voodoo engine. It's compromised flat-plane firing order is pretty unique in sound already. I'd REALLY love to see someone get a custom crank and cams made to fix the firing order into a true flat-plane and run twin intake manifolds. The story was that for hood clearance reasons Ford used a shared plenum like the Coyote which necessitated the change to the firing order. I want someone to build the Voodoo Ford always wanted to lol.
@ForceEngineering
2 жыл бұрын
@@michaelallen2501 that would be awesome! Im sure it would sound crazy.
@michaelallen2501
2 жыл бұрын
@@ForceEngineering to finish the dream I'd stick it in a Factory Five Daytona Coupe lol.
@stephenhans189
Жыл бұрын
3500 hp run 10to 1 static . Great ratio
@jmendozas197
2 жыл бұрын
Nice man. 👍 So I found out I lifted a head on my stock Gen1 (single turbo/TH400), and I’m deciding on what to do next. What would you recommend for a “budget” build? I’m shooting for between 900-1000whp and a Gen2 short block is hard to find right now. Can’t afford a fully built motor just yet, so I’m just weighing my options.
@ForceEngineering
2 жыл бұрын
Thats unfortunate! I'd do a rod & piston in what you have. I'm also having great luck with the sce gasket and would suggest that. It will be some what costly for the short cause you'll have to have the crank balanced.
@Flitzer514
Жыл бұрын
Who did the sleeves for the block?
@ForceEngineering
Жыл бұрын
L&M
@radioactivefabrication
2 жыл бұрын
What are you running for primary tube size? I might have missed it in your other videos if so I apologize.
@ForceEngineering
2 жыл бұрын
Not sure if i have mentioned it or not actually. 1 7/8s
@radioactivefabrication
2 жыл бұрын
@@ForceEngineering why did you choose to go with 1 7/8 over 1 3/4? Looking at doing a 8:1 setup in my drag car with a coyote.
@ForceEngineering
2 жыл бұрын
@@radioactivefabrication results from a previous test on a turbo 4cyl setup. 17/8 setup to 2 in and just 2" preformed the best at all boost levels up in the 7500+ rpm range.
@radioactivefabrication
2 жыл бұрын
@@ForceEngineering gotya guessing space is the reason you didn't go with 2" then?
@ForceEngineering
2 жыл бұрын
@@radioactivefabrication space was a concern yes. Also the engine we were testing was making around 375hp per cylinder, so I knew I had some wiggle room.
@johnparrotte9352
2 жыл бұрын
Very nice. Which cams did you end up putting in it?
@ForceEngineering
2 жыл бұрын
Its a custom Comp set. Planning to do a video around the cam change. Going from vvti to non vvti with custom cams and its affect on hp and spool time.
Пікірлер: 30