Not quit how I would have done this restoration :). I do this as a hobby on older Winchester rifles, late 1800s to early 1900s, and it's truly a learning experience. Lots of photo, writings, videos, hands on research and experimenting to try and get the rifles cleaned up or totally redone. I do commend you on your courage to take this project on. I'm not sure I would recommend shooting this rifle. if you do, keep the loads light. All in all nice job and thank you for the time taken to share with us all. :)
You should make a video and show us the proper way
@casperhoss2952
Ай бұрын
Great job on your restoration. It came out really nice! What did you apply to the barrels and lock to protect them? The natural look is pretty sharp. Ive never seen barrels and locks not blued. Any advice you can give me would be great. I have an 1860 side by side I'm redoing. Thank you for your time and talents. Keep up the great work.
@adamorzechowski8126
Жыл бұрын
Tak, zgadzam się z poprzednikami, to jest dzieło sztuki. Gratulacje.
@TopGunRestorations
Жыл бұрын
Dziękuję
@user-jo4sq8xy2e
Жыл бұрын
R @@TopGunRestorations
@user-jo4sq8xy2e
Жыл бұрын
@@TopGunRestorations join
@doorman13k
Жыл бұрын
Enough solder there for six shotgun..must like cleanups!!
@TopGunRestorations
Жыл бұрын
Yup first and hopefully last time I did something like that lol
@jwgbmp40
9 ай бұрын
what became of removing the breach? you put heat to it, so something may have changed as well, ,due to tthe pressure applied trying to remove. ?
@casperhoss2952
Ай бұрын
What did use to protect the piece you didn't blue? Any advice you can give me would be greatly appreciated. Thanks for sharing your time and talents with us.
@TopGunRestorations
Ай бұрын
I used tremclad clear satin antirust paint
@casperhoss2952
Ай бұрын
@@TopGunRestorations thank you for sharing. I will look into that. Your videos are awesome!!! Keep up the great work. I look forward to seeing more videos on your channel.
@TopGunRestorations
Ай бұрын
Thank you so much
@RcTemplario
Жыл бұрын
Congratulations , i very like your work in shotgun, wonderful
@TopGunRestorations
Жыл бұрын
Thank you
@jstaatzy5606
2 жыл бұрын
Fantastic work - Congrats! Exceptional video quality and editing, although I had to watch it on mute. Your soundtrack was not the ASMR experience for a restoration video. Curious, why did you choose not to blue the steel? Probably best you didn't remove the breech plugs too. What other firearms do you have planned?!
@TopGunRestorations
2 жыл бұрын
Thank you for great review, it keeps me motivated to do more videos because of it :) Honestly it never came to my mind to blue the steel I guess I wanted to see the original texture of the steel from 1850's
@BuildProne
2 жыл бұрын
I find it weird that my break barrel late 1800s shotgun has the exact same triggers, trigger guard, and but pad as that muzzle loader. Looks like allot of them around them made similar looking parts
@faizansheikh78786
21 күн бұрын
Nice
@TopGunRestorations
20 күн бұрын
Thank you
@ledart
Жыл бұрын
good job! Perfect!
@TopGunRestorations
Жыл бұрын
Thank you
@magmabit-d2i
Жыл бұрын
a work of art!
@TopGunRestorations
Жыл бұрын
Thank you
@magmabit-d2i
Жыл бұрын
@@TopGunRestorations I have to thank you! I'm so happy that I subscribed to your channel, there are so many things to learn! this is not just about restoring old guns , it is an art just like poetry in motion!
@TopGunRestorations
Жыл бұрын
Thank you so much, comments like that definitely keep me motivated..
@mrdariusgib2984
3 жыл бұрын
All good. But does it shoot....??? :)
@TopGunRestorations
3 жыл бұрын
I live in Canada where shooting any rifle requires a gun license and I couldn't find anyone with right knowledge to test fire the muzzleloader although I am still looking.
@stephenfields6236
Жыл бұрын
I don’t think you did the barrel keeper key correctly, but the rest seems good…especially the barrels soldering.
@TopGunRestorations
Жыл бұрын
It was my first time restoring a rifle I tried my best thank you.
@stephenfields6236
Жыл бұрын
You did great for the first restoration! I am 72 and would not want you to see my early work. I just want you to understand the barrel keeper needs to pass completely thru the stock so it’s easily removed. When removed the barrels can come out of the stock for cleaning after a shooting session. It was a clever system that you failed to understand properly.
@TopGunRestorations
Жыл бұрын
There was an old bolt stuck in it and wood was patched with wood filler. I couldn't find any good information on how to do it properly. I will try to do another restoration of 1783 tower marked muzzleloader in a near future hopefully I will do a better job. Thank you for your input and now I am glad that I couldn't find anyone to test fire that shotgun :)
@lucioberrocal8766
Жыл бұрын
@@stephenfields6236bu ki😮
@fabianmunoz3417
Жыл бұрын
Nrsesito saber donde las fabrican En colonbia
@roblynch2809
6 ай бұрын
My Goodness,hard to watch this sort of sacrilege
@pradipale690
Жыл бұрын
Hello sir could you tell me the names of soldering two barrels
@TopGunRestorations
Жыл бұрын
I really don't remember but I think it was 50% silver and 50% tin .
@joaquimsantos9591
Жыл бұрын
Muoito legal parabéns e da Monha epoca.
@TopGunRestorations
Жыл бұрын
Thank you
@fabianmunoz3417
Жыл бұрын
Donde las fabrican que parte de colonbia por fabor nesesito Saber
@TopGunRestorations
Жыл бұрын
They don't make them anymore those are from 1850's
@joseramosdasilva9263
Жыл бұрын
Gostaria de comprar uma está essa ispiguada
@TopGunRestorations
Жыл бұрын
I don't want to sale it but it shouldn't be hard to find it in the internet. Good luck
@manuthakor1438
Жыл бұрын
Thakur Ajay
@joseeller6353
Жыл бұрын
Boa noite , pode informar a marca(fabricante0 , obrigado
@TopGunRestorations
Жыл бұрын
Hi there all I know is that this is 1850's R. Hughes double barrel rifle. Thanks
@gopalsinghchitodiya5623
Жыл бұрын
Supar
@TopGunRestorations
Жыл бұрын
Thank you
@gopalsinghchitodiya5623
Жыл бұрын
@@TopGunRestorations set up on City hall
@germansahidbeltranardila2985
Жыл бұрын
Huuuuuyyyyyyyyyyyyiiii q bien desde Colombia
@ErZaakir
Жыл бұрын
You want in Colombia???
@user-fk6ur6tx7r
Жыл бұрын
มีขายไหมคับ
@TopGunRestorations
Жыл бұрын
No, sorry
@owsleyhunter2757
Жыл бұрын
looks more like a shotgun
@SonalalKisku-bn7ee
2 ай бұрын
हमको भि गानदा चहाये
@user-tw9yi7vh9o
3 жыл бұрын
Ужасное качество сварки стволов :(
@sebastianwachecki4649
10 ай бұрын
A classic KZitem "restoration" - sandpaper, acid, grinder and lots of comments from delighted people without knowledge of the subject. You destroyed this weapon and didn't repair it. After this pseudo-renovation its value is lower than before
@RealLordkiffington
Жыл бұрын
Came up OK, but the checking on the wrist and the soldering were not great
@TopGunRestorations
Жыл бұрын
Yup totally agree hopefully next rifle restoration I will do much better.
@RealLordkiffington
Жыл бұрын
I find a verry small file oval shaped worked best for me to fit in the original grooves, tedious long process, the barrels will be solid though
Пікірлер: 68