great video thanks to you now i have a diagnose plan for my car problem.
@DaringBeefcake
Жыл бұрын
Am glad the vid can help, I discovered in the end that issue I had was the valve steam seals, they were leaking to much oil into the spark plugs wetting them hence the car couldn’t run properly. Just something to note..
@ClassicRich
4 ай бұрын
Very good video! What size are the 2 adapters you have connected to the distributors to get the readings? I’d like to perform this test as well.
If when checking the 4 lines on top of ur fuel distributor and gas not coming out or barely goes out when u crack the line,, what does that mean..?? Consider that i bridge Fuel pump ? In other words what would cause the fuel not to come out those 4 lines on the top of the fuel distributor?
@DaringBeefcake
6 ай бұрын
I cracked open those fuel lines during my investigation process and there wasn’t much fluid coming out, but that was not the best way the check the condition of the fuel distribution , it’s a good idea to check the fuel pressure coming out of the fuel distributor, regulated an non regulated. If pressure is good then the next problem could be the fuel injectors. Depending on what you are trying to check. You can bridge the fuel pump to check the fuel pressure at various points to check if the fuel pump is faulty or the distributor itself.
@lewismarcvs2039
2 ай бұрын
where can I find that manometer to check mine. Regards
@DaringBeefcake
2 ай бұрын
Google search, fuel pressure test kit and you will find many.
@johnburketransport
2 жыл бұрын
Hi, did you sort out your problem with the 190 e ?
@DaringBeefcake
2 жыл бұрын
Hi yes I did it starts and runs lovely now.
@karolisusavicius8710
2 жыл бұрын
What was a problem?
@DaringBeefcake
2 жыл бұрын
@@karolisusavicius8710 In the end the problem turned out to be the valve stem seals which were worn out and oil was leaking into the spark plugs and making them wet, at the beginning i confused the wetness with fuel and and not oil. However I cleaned everything in the processes including removing the fuel tank which was very dirty..
@jeanjeanlebelge9263
Жыл бұрын
Peut tu me donner un schéma ou le terme exacte des pièces changées à la culasse haut moteur
@DaringBeefcake
Жыл бұрын
Hi in this video I did not change any parts, so am not sure which parts you need ?
@jeanjeanlebelge9263
Жыл бұрын
@@DaringBeefcake yo j’ai communiquer aussi avec ici à de fix your Mercedes moi j’ai aussi youtubeur nom de ma chaîne KZitem. « « « belgobidouille « « «
@DaringBeefcake
Жыл бұрын
@@jeanjeanlebelge9263 Salut le problème avec ma mercedes était les joints de queue de soupape..
@jeanjeanlebelge9263
Жыл бұрын
@@DaringBeefcake la mienne a le même problème est il possible de les changer sans démontage de la culasse ??
Пікірлер: 27