Excellent job on the fronts of the running boards!!
@CentennialCustoms
8 ай бұрын
Thank you very much! Very happy with them!
@hoosiertrucker191
8 ай бұрын
awwww....sweetie puppies!
@jkwmartin1
8 ай бұрын
This is my new favourite channel.
@CentennialCustoms
8 ай бұрын
Oh wow thanks!!!
@kevind5508
8 ай бұрын
Man that running board detail is killer. It's one of those subtle changes that just makes sense. Nice work
@CentennialCustoms
8 ай бұрын
Appreciate it! It’s all in the details haha
@miketodesco6915
8 ай бұрын
Can’t wait to see the results
@hoosiertrucker191
8 ай бұрын
LOVE the time lapse...Your video's style should be an inspiration for other's content creation...take notes, other video creators!! love the little shop! Cozy, and just enough room for you, and a fridge for frosty adult beverages to boot! if it wasn't for youtube, I'd have a sound system, with tunes cranked all the time, but alas, I don't even have a garage...
@CentennialCustoms
8 ай бұрын
Appreciate it!!! Trying to keep the vids too the point and show the work without too much extra stuff. Garage is cozy but definitely want bigger lol and there’s tunes going when I’m not filming!
@hoosiertrucker191
8 ай бұрын
LOVING this build! Ugly duckling Envoy, into a beautiful swan Chevy truck
@CentennialCustoms
8 ай бұрын
Haha!
@waynejanzen9346
7 күн бұрын
Wow, you do some really nice work! The tool you used to move the fender forward was very smart, and the work on the running boards, very impressive! I'm glad I found your channel. I'm in the process of trying to decide what frame to put under my 1956 IH. Seeing what you're doing has convinced me to use a trailblazer frame. I'm getting a lot of good ideas from you that I think should work on the IH too. Thanks for posting the videos!
@CentennialCustoms
6 күн бұрын
Thank you!! Yeah there frame is a great starting point, cheap to air ride without cutting the frame! There’s two lengths of trailblazers just a heads up!
@waynejanzen9346
6 күн бұрын
@@CentennialCustoms thanks for the heads up. I thought there was just one frame length. I'll make sure I get the short one.
@wilson561
8 ай бұрын
I like how this build is coming along. Pretty amazing how you have been able to blend new technology with the old truck. Thanks for sharing.
@CentennialCustoms
8 ай бұрын
Thanks! Appreciate it! Still lots to do
@HODGEPODGEDODGEGARAGE
8 ай бұрын
You do a great job at solving problems like building the bed mounts and making the level tool to drill holes. Nicely done! It does make things hard to do by yourself but you adapt and overcome. Truck is turning out great! Happy wrenching 🔧🔩
@CentennialCustoms
8 ай бұрын
Thank you very much!
@dougschmidt8302
8 ай бұрын
I like what you are doing, you are going to have a very drivable truck when you are done. I did the same thing 2 years ago with a 4x4 Tahoe on a 49, I love driving that thing . The wheelbase was only 3/4” longer, so a not noticeable gap between the cab and bed. The biggest challenge was the rad support. I even left the original inner fenders on it. Fuel filler came out between the rear fender and the stake pocket. Bed is 2” higher than standard. I used most of the original wiring from the Tahoe and fitted the Tahoe inst. cluster into the original dash. I did the floor and firewall in a similar style as you. I have a stock 49 also- the stance is the same after I went down 2 tire sizes. I didn’t want to but had to be very careful to keep the tires from scuffing fenders -Love what you are doing also with the camera and sound👍
@CentennialCustoms
8 ай бұрын
Sounds like a great build! Thanks for the support!
@ervinjohnson8
8 ай бұрын
Sir you are doing a wonderful job. I didn't think it would happen. Two thumbs up.
@CentennialCustoms
8 ай бұрын
Appreciate it!
@JeanEdouard-v7d
8 ай бұрын
Very encouraging, just pick up my 54 Chevy. I can wait until the final product to start cutting and working on my project .. any tip is appreciated . Great Job, i know you’ll be enjoying it.
@CentennialCustoms
8 ай бұрын
Are you thinking doing the same with using the envoy floor and firewall? I don’t think my project will be done anytime soon by the time it’s painted and all that.
@IdiotF0ol
8 ай бұрын
I'm glad the background music is actually background music. Too many other channels try to have the music be the star instead of the build. Great work so far. I prefer the calm way you present, but lid and obnoxious seems to do better on KZitem. I hope you don't drift that way, but it does and I understand the draw.
@CentennialCustoms
8 ай бұрын
Appreciate the comment, yah I try to keep it about the truck and the work, not too much messing around
@norrisabram9577
4 ай бұрын
Awesome job, keep up the good work 😊
@CentennialCustoms
4 ай бұрын
Thank you!
@michaelblackey6633
8 ай бұрын
Build is looking awesome. Great attention to detail!
@CentennialCustoms
8 ай бұрын
Appreciate the support Blake!
@sdbougeno
8 ай бұрын
truck is looking great!
@CentennialCustoms
8 ай бұрын
Thanks! Appreciate it
@dieselmechanic9824
6 ай бұрын
Pretty cool project
@CentennialCustoms
6 ай бұрын
Thanks!
@toddrichardson9256
8 ай бұрын
Your doing a good job, keep up the good work 😊
@CentennialCustoms
8 ай бұрын
Thanks! Appreciate it!
@robertchampagne2485
8 ай бұрын
Grate job I’m just looking into a 50s Chevy chassis swap now you have me looking into a different direction lol I hope the radiator being lower than the engine won’t give you an issue
@CentennialCustoms
8 ай бұрын
Yeah if I vacuum bleed it, hopefully won’t be a problem
@Mr62biscayne
8 ай бұрын
I wasn't sure how this build was going to go but you are tackling the challenges quite well. I don't really have any suggestions except keep at it and keep doing what you are doing.
@CentennialCustoms
8 ай бұрын
Appreciate it! Thanks for keeping up with the build!
@TheSuburbanGardener
8 ай бұрын
Nice build bro. Im doing a 49 ford F1 on 98 Explorer atm. Its an insane amount of work for a perfectionist like myself.
@CentennialCustoms
8 ай бұрын
Yeah I keep thinking I could slap this together fast and get it done but I want to hold a standard too
@factoryratgarage
8 ай бұрын
Nice work. Anyone ever tell you, you look like Chester Bennington.
@CentennialCustoms
8 ай бұрын
Hahah no I’ve never gotten that before!
@hoosiertrucker191
8 ай бұрын
sorry for all the suggestions...kind of an out of the box thinker, and always full of ideas, and love to share them freely with anyone that is willing to listen...
@CentennialCustoms
8 ай бұрын
No need to apologize for that! Appreciate all the comments
@hoosiertrucker191
8 ай бұрын
what if you extended the front part of the bed, and miter the front corners to match the curvature of the back cab corners? Similar to what you've done with the running boards...Awesome idea there, btw! The running boards are a work of art!
@CentennialCustoms
8 ай бұрын
I have seen a lot of custom shops form it around the cab, I’ve thought about it! We’ll see! A lot more work but would add custom touch
@JustinPaul1st
7 ай бұрын
Just came across the channel and being watching the build from the beginning and your method of madness or logic is outstanding...enjoying the channel...however my suggestion is too much of the timelapses kills the vibes of the build...we enjoy seeing the process and the hard knocks that go with it...hope you take my comments with a good heart...Who knows soon you be as big as Halfass Kustom or Make it Kustom the two fabrication channels follow...Check them out if you havnt already...Best of luck on the channels and the future builds...
@CentennialCustoms
7 ай бұрын
Haha yes I know those channels! I’d love to be that big one day! Big dreams haha. Thanks for the suggestion! I’ll keep it in mind in the future!
@hoosiertrucker191
8 ай бұрын
thank you for taking out the sounds of cutting, grinding, and hammiering, btw...
@CentennialCustoms
8 ай бұрын
lol no worries!
@miguelpagansr6128
8 ай бұрын
Looking so good so far, I’m surprised that you didn’t use the finished end of the front fenders after you cut it them off. Looking forward to seeing the video.
@CentennialCustoms
8 ай бұрын
Thanks! But not exactly sure what you mean with the front fenders, haven’t cut them up yet lol
@miguelpagansr6128
8 ай бұрын
@@CentennialCustoms my apologies, I meant the front of the running boards.
@CentennialCustoms
8 ай бұрын
Oh! Yeah I wanted them more blended into the fender, and they get wider as they go towards the front so just cutting a section out would of been a lot of work aswell to make the width look proper
@miguelpagansr6128
8 ай бұрын
@@CentennialCustoms ok I get it now, it’s a little hard to see what you’re talking about. There’s a saying, there’s a method behind the madness. Good progress so far, looking forward to see what’s next.
@kevinellam6710
8 ай бұрын
LOVE"T GRRR88T STUFF BROTH"R !!! ... .. .🎉
@CentennialCustoms
8 ай бұрын
Thanks!
@Tiffany.jestadt
8 ай бұрын
Can I pet that dog
@hoosiertrucker191
8 ай бұрын
inside the bed...wood floor, small hole where the spare tire winch point is, and put in a flush mount, hot match gas cap from kindig it design...thoughts?
@CentennialCustoms
8 ай бұрын
I’m thinking steel floor along the frame and then wood bed floor flush with the top and a box cover, I’m planning on driving this to my cabin and back so I want some storage but this box won’t be very deep with this frame
@LAODERTHANWORDZ
8 ай бұрын
Dope !
@LAODERTHANWORDZ
8 ай бұрын
Should modify lights from envoy onto chevy.. and move those round lights to bottom as fog lights ..
@CentennialCustoms
8 ай бұрын
Thanks for the idea! But I’m going for a stock 50s look
@miketodesco6915
8 ай бұрын
Hi, I’m curious why you decided to use body mounts on the box. Now you will have to cushion the running board mounts
@CentennialCustoms
8 ай бұрын
My plan is to make the mounts attach the the rockers of the cab and or the box so the body will all be bushing mounted as one
@tonymunoz3615
8 ай бұрын
Nice job. One question. How much clearance between front tires and fenders when turning the steering wheel?
@CentennialCustoms
8 ай бұрын
As of now none lol. We’ll see how much lift I get out of the air ride, I’ll be running different wheels with positive offset and smaller tires
@tonymunoz3615
8 ай бұрын
Awesome ! Please let me know what the results are when you get there.@@CentennialCustoms
@danielbuckner2167
8 ай бұрын
 on the time lapse. That front tire will be tight on clearance, are you going to change wheels or roll the fender lip or trim it?
@CentennialCustoms
8 ай бұрын
Yeah I’ll be running a smaller tire, I’ll roll the fender forsure, I’ve seen people swap to a S10 hub to change the bolt pattern for more wheel options with more offset, just waiting to see how the air ride changes things but yes I got plans to make it work either way.
Пікірлер: 75