I want to THANK YOU. Thank you for saving these old babies from rotting away
@waynecap5960
2 жыл бұрын
You could get a 2 week old Dead Horse to run again...🤣🤣 Another great video look forward to the next one.
@ThisNThatGarage
2 жыл бұрын
That would be a stanky will it run!
@vapewilder7843
2 жыл бұрын
I just have to say that I'm mighty proud of that old starter. It was the real star of the video. It hung in there and cranked as long as you needed it and never complained. Round of applause. I really like how you make those old parts work instead of running to the parts house first thing. I appreciate the way you work. And I really enjoyed riding Dude with you to walmart. It really brought back some fond memories and made me smile.
@ThisNThatGarage
2 жыл бұрын
Starter wasn't doing much work because there was very little compression.
@albertplungis7007
Жыл бұрын
Ppp
@redredmane5544
11 ай бұрын
They definitely don’t make starters that THAT one anymore.
@jamesmichael3998
2 жыл бұрын
I really like the old dump truck it's definitely worth saving, great job. An old trick I learned years ago with a stuck open valve if you use a long piece of quarter inch rope and fish a bunch of it into the cylinder through the spark plug hole and bar over the motor that rope can bunch up and push the hung valve back up to free it loose, it's an old trick. Cheers from Jacksonville Florida 🌞
@bnoone3072
Жыл бұрын
It's also a fool proof way of changing valve stem seals (overhead valve engines). You could hammer on the valves and they won't drop into the cylinder.
@craigbowley6783
2 жыл бұрын
It's extremely satisfying to get an old engine runnin especially when people say you you can't
@brucemasters9132
2 жыл бұрын
My Grandfather used to describe the options on a truck like this as; Armstrong power steering, stomp hard power brakes, and automatic shift it yourself transmission with optional clutch. Yours also has convenience of a hood mounted gas tank and auto door openers.
@tommak6516
2 жыл бұрын
I drove pickup trucks and cars from the 1960s with no power steering or power brakes and there was no extreme force required to operate the vehicle. Seems to me power steering and power brakes are unnecessary complication on cars and small trucks. Also crank windows work just fine and air conditioning is unnecessary in the northern 1/3 of the US. Replace automatic transmissions with manual also. Vehicles would be more reliable and affordable.
@GeneralSulla
8 ай бұрын
@@tommak6516Just more stuff to go wrong I reckon. My first car was '63 Chevy Biscayne 3 on the tree with a 283! Old USAF car. Drove it into the ground.
@tommak6516
8 ай бұрын
@@GeneralSulla What surprised me is if we had some of those old vehicles from the 1960s they would be worth big money now (if in good shape). You can't predict anything I guess.
@FrederickvanderMerwe
6 ай бұрын
J>
@pilsplease7561
6 ай бұрын
Yeah, Power steering feels like it takes more force for me to turn the wheel ironically lol. Also I agree on windows, my car has windows that automatically drop to open the door cause the top of the car has a channel the window goes into and it needs a motor to open the door or you would break the glass dodge did some weird shit with the challengers. @@tommak6516
@RvrseWrites
5 ай бұрын
I’m addicted to watching all your videos and using them as background noise while I work, thanks for making them! 👍
@henrymartinez8202
2 жыл бұрын
155 guys would keep walking by this old boy, but there are a few of you yourself included that have a vison that we can't see. It is incredible how you bring these time machines alive again. You make us better at TurningBolts, thank you.
@larrybunch8190
2 жыл бұрын
I worked for an IH Dealership back in the 70s for several years and sold a lot of parts for these old Trucks so I really enjoyed this Will it run episode.
@JamesCouch777
Жыл бұрын
Growing up in the 60's between my dad, uncle and grandad we were always working on the engine in a truck, tractor or other equipment so this brings back a lot of memories. Kudos for hanging in there 👍
@aaronhickox6839
2 жыл бұрын
Just wanted to take a minute and say thank you, I love the videos sir. I am happy I stumbled across your channel a couple months ago. The knowledge you shared is great. Ever since I was a young kid I've loved tinkering with small engines, or pretty much any with a motor for that matter. It brings joy to my heart to take something most people would view as scrap or trash and make it work again. It's definitely a dying art with all the computer crap. I've been able to pick up little tricks I never thought of to get something working again thanks again God bless.
@ThisNThatGarage
2 жыл бұрын
👍
@johnelliott7375
2 жыл бұрын
@@ThisNThatGarage thank you
@Tony_Re-imagined
Жыл бұрын
@@ThisNThatGarage i actually learned alot while looking at your video's, im gonna go try to repair an old 1963 428 motor station wagon that my grandpa used to drive
@dennisholst4322
Жыл бұрын
Would it haul more than 6 bi
@united2436
Жыл бұрын
2 22 2 AM 2 nd 2 cdch33 cffff eggjc
@robertmiller1916
2 жыл бұрын
Enjoyed the video! The oil trick to build compression is helpful. One trick I use to get the engine to pop is to heat up the number one spark plug. Sometimes that works. These old vehicles have a mind of their own!
@EdselMoody
16 күн бұрын
😅 😢 good work 🎉🎉🎉😂😂❤
@lottiecooper609
2 жыл бұрын
A little of that Tennessee shine down in the gullet of the beast, and she will roar like a lion!!! Once again well done young man, and thanks for sharing!!!
@allenmkent9141
4 ай бұрын
It was fun watching you chug-a-lug through that startup. Anything that old sitting that long you pull off the valve cover first thing, and free the valves. Take the carburetor completely apart to clean and put in working order. The timing is too far advanced, thats why its hard starting and backfiring. The air-fuel mixture screw on the carb sets about 1!/2 to 2 rurns out after its seated. Then Adjust while its running. Timing can be adjusted while its running too. An worn out engine doesn't run at peak performance with the using the factory timing spec. It has to be advanced about 3 to 5 degrees from the factory setting.
@stevenlatham4397
2 жыл бұрын
Man the channel has been killing it, I’m very glad to see that. You work hard and deserve everything good that happens.
@ThisNThatGarage
2 жыл бұрын
Preshate it. 👍
@fouazfozi1051
Жыл бұрын
@@ThisNThatGarage تحيا لمريكان 🇺🇸🇺🇸🇺🇸👉
@wisjeepmanjim8450
Жыл бұрын
You're a real master of the English language. Wife is always correcting me for my versions of words. But I really enjoy the videos. Rippin shit apart and makin it work again. A true putzer.
@amettamail
Жыл бұрын
I love hearing you say “one more try”, and then trying it about 15-20 more times. You’re stubborn in a great way 😂
@braddokken9191
2 жыл бұрын
That was pure artistry watching you get that truck running. Its hard when one or two things are flaky but when spark, fuel delivery, valves and compression are acting up it takes a maestro to get that engine to start. This video also had my interest because there was a 1 ton International, same year, on my cousins ranch. Growing up I dreamed of hauling it off and getting it running. Before I moved back to the area some idiots decided to shoot it up and now there is not much left of it. I was able to live some of my dreams seeing you get this one running. If I ever run across a '50 International, I may have to buy it.
@DanDan-yy8sf
2 жыл бұрын
I for one love your stubbornness and wanted that engine to start as much if not more than you Chad. I'm pretty sure the other gearheads watching here feel the same way. I can't say enough good things about this channel, Chad had me hooked from the first time I heard him say, "auhhh Yaa" not to mention the man sings like a songbird 🎵🐦.... I'm on pt 2 of the Fire Dragon heat exchanger right now... My goodness what an ambitious build ! Great content creator !
@Gadgetman1989
2 жыл бұрын
Man what a rig, loved watching this and thanks for saving the old girl, I commend your dedication to getting her running
@KIRA_G4CH4
Жыл бұрын
I like your old black Chevy truck. My dad used to own a blue one he said, and he called it Ol' Blue. He used to cut and haul firewood in it alot before i was born, in the 70's. Thanks for the videos and the DIY teaching. 👊✌️
@jamesmcdonald5868
2 жыл бұрын
Your content is GREAT! Your channel as well as Sleeperdude! Y'all both Tennessee Boys, and you sucked in a Detroit boy, livin the Tennessee Country Dream up yonder in Brighton, Tennessee! Thank you for your honesty, integrity, and terminology you have introduced me to over the last 2 months! I am forever a fan!
@FluffyskipF
2 жыл бұрын
You are an amazing mechanic. Couple weeks working on this engine and you are off!! Driving around. Truly amazing. Wish I had your talent
@neillpotts6019
Жыл бұрын
Just wished to say thank you for a wonderful and very enjoyable video. I've just been sat in front of my log burner on a cold winter's afternoon in East Yorkshire, England 🇬🇧 watching your video which brought back happy memories of watching the chap who lived opposite us spending many a happy summers day working on his old trucks. Thank you from across the pond. 🇬🇧
@ThisNThatGarage
Жыл бұрын
👍👍
@ronniepapepape1629
2 жыл бұрын
That was an awful lot of work. But you didn't give up and it worked. Thank you. I love these old trucks.
@thisolesignguy2733
Жыл бұрын
This was awesome, I love that old international. If it ain't squeakin', it ain't intriguin'. great job!
@jjock3239
Жыл бұрын
Watching you start that International up, took me back almost 70 years (yeah I'm that old, 79). I remember those 6 bangers would always fart back when they were cold. My first job as a commercial driver, included driving a 55 International one ton, and I am guessing the engine you have, is out of a later International truck.
@donalddangerfield8064
9 ай бұрын
You can run a chain through a heavy length of pipe and draw the chain tight by backing two vehicles together till you have just enough slack on both ends of chain to make turns. Grandpa taught me
@derekstocker6661
Жыл бұрын
So very well done, that ole pickup at 29.12 sure gets a move on! Well done with the International, look forward to more on that baby even if she's hard to steer. Thanks for great entertainment and take care when working on these vehicles especially when they blow back at you!
@bertlexington7716
2 жыл бұрын
While you had it running … should have taking it back where you got it. You are a great mechanic
@DanDan-yy8sf
2 жыл бұрын
I don't know bout the rest yawl but I give a Thumbs Up and a Like BEFORE I watch the video because you know Chads no punk and you know he's going to bring it ! 🔧
@jonathanrossi4068
2 жыл бұрын
You hit it on the head making something old that hasn't ran in decades is my favorite thing to do love it nice as always
@shorerebel
2 жыл бұрын
I really enjoy your videos. I get inspiration to get out and work on my own projects by watching you. No matter how frustrating it gets you never give up. Keep ‘em coming!
@patchvonbraun
Жыл бұрын
When I was a kid, we knew a family where the husband was a paleontologist. He drove an I-H Travell-All (probably late 1960s). It was a beast. Every summer, he'd drive it a coupla thousand miles from his home to his research site on the Burgess Shale. I don't know how many miles it had on it when they replaced it in the mid-1970s with a Jeep Wagoneer. I always felt like we were heading out on safari in that I-H travellall.
@НиколайСоколов-я1э
Жыл бұрын
У нас похожие машины до сих пор на ходу . Так в профиль смотришь , "ЗИЛ" . СССР копировал машины , оборудование было поставлено во вторую мировую , я сам на такой учился ( на советском варианте ).
@jimrky6062
2 жыл бұрын
Good going in getting this one running. Seems like your total investment this farm aside from the battery, is purchase price, some brake line, points, some spark plug wire, sealer and sundries. Not bad at all! Loved what you did with the carb - remember doing much the same with an engine (rebuilt) that we hauled out of a yard for my Dad's old 1960 Chev: we made 1 good carb from the 2. Thanks for the great work and interesting content.
@johnvonsauers8867
Жыл бұрын
well, that was a good job, I never thought you get that baby running, thank you👍👍👍
@charlesw.hopperjr.5236
Жыл бұрын
That’s Kool‘Running and Driving;Love listening to the old drive train,Really enjoyed the video!Take Care, Your Oregon Friend’☮️
@katsiduzynski488
2 жыл бұрын
What a lovely truck. Hoping you get it a-going - has a good look to it. Lots of potential. Love the serene blue color of it. Was sharp back in it's day. Thanks for sharing the start of this trucks new lease on life. 😉👍
@hfdzl
2 жыл бұрын
I have the same cosmic understanding of mechanical things! I would rather work on a chunk of old iron than anything else. Great satisfaction is had! Keep 'em coming. A loyal subscriber!
@rexfreelom4300
11 ай бұрын
That is the key starter toggle switch under the hood and the terminal with connector is rust steel. So clean the rust out that the battery connection is contact touching good then hook up to the electric motor that is motor starter. Then the ignition switch goes thru the fire and finally then goes thru the dashboard. Thanks.
@davidcarroll8533
Жыл бұрын
You crawled over the truck to put air in the tire by the fence. I laughed so hard when the air hose slid right back to the other side. I thought thst would be my luck too.
@mariafernandez6439
Жыл бұрын
There is a charm in repairing told trucks and automobiles! I´m glad I found your channel.
@Brock_Landers
Жыл бұрын
Bud, if I ever come across a car or truck that's been sitting for a while and I try to revive it, I ALWAYS put a cap full of oil down every cylinder before I attempt to start it. The cylinder walls are easily fuel washed and it won't have enough compression to farr up, the oil helps the rangs to come back around. At least enough to build a c-hair of compression.
@commiehook6323
2 жыл бұрын
Great job. I do so love the way that you stick with things, even when they get way problematic. Yeah baby!
@RODALCO2007
8 ай бұрын
Another great video. Persistency pays off. The test-drive was awesome with the odd flame coming out of the carbi and the fuel tank falling off at the end. New subscriber from New Zealand.
@schwimdandy3820
2 жыл бұрын
I'm really glad he's ok. Thank you for sharing your adventures.
@daviduglem3213
2 жыл бұрын
Your tenaciousness is encouraging! Didn't know international had overhead valves that early 1950. Same year I was born lol. Couldn't have been much over 200 cubic inches. But from what you've said it's a bigger motor than I thought. Thanks again for the interesting content. Dave
@ThisNThatGarage
2 жыл бұрын
Motor is a little newer that the truck.
@jogalong
Жыл бұрын
I love how any part of old tech can be easily repaired
@Falco45able
Жыл бұрын
Ignition timing seems to be out a little ,turn the distributor slightly one way or the other, or use a timing light to get it correct!😉🇬🇧
@TestECull
2 жыл бұрын
Man that engine runs GOOD. Just had to get it started and free off that stuck valve, it cleared its throat nicely. Bit weak for a truck like that, but I could see it being a nice swap into something else from the era that needs an engine.
@corydunaway
2 жыл бұрын
An easy 1 man brake bleeder is a bottle with a hose and brake fluid already in it. you keep air from being sucked back in with it only having new fluid to suck on
@jamesblanke9175
2 жыл бұрын
Makes me apreciate the mid 70s 80s stuff. Not so much the 2010s and up computer stuff . Nice old body style on that truck,
@gispel7058
2 жыл бұрын
I use the paper dragging deal to clean the micrometers faces. Metal shop teacher taught us that in 1969
@Vifiatos
Жыл бұрын
I’m retired Air Force, I remember in the 1970s there being auctions on base of military equipment. We would often see Air Force members driving retired Air Force vehicles on base.
@jimmywilson1388
6 ай бұрын
Man that’s a cool old truck… Glad you got er going…
@glenwestphal7510
Жыл бұрын
With the constant back fire and even with the change over of the other carb , it did it even more , I saw on another channel the guy did all the same stuff as you are doing and was running Into the same issues with it staying running and kept back firing as he's trying to restart it , a watcher of his channel told him that his timing is to rich to turn his distributor cap more lean and he barely moved it and wow that was it and it never have him an ounce of trouble since , I'm not a mechanic by any means , my dad was and he was old school ! I learned a lot, enough to never take even my new vehicles in for repair , do it all myself, even now that I'm a wheelchair ound person I get. y Slef to the ground and work my breaks , oil change , radiator rwplace.ent 2 times this year and an alternator, water pump between the 3 vehicle's we have and I enjoy doing that ki da of stuff , but like you , I wish I had the big shop to do it in instead of the driveway. Keep on keepen !
@smashthehammer5348
Жыл бұрын
I have spent the entire day binge watching your videos. And i see absolutely nothing wrong with it.:)
@ThisNThatGarage
Жыл бұрын
👍
@stuartfletcher2378
2 жыл бұрын
You have got the stick with it spirit, slow and steady gets it done. Definately loved every second , I'm now working on my patience . Thanks for the show, Wonderful...Stu in Canada !!!!!
@rexfreelom4300
11 ай бұрын
IBM the push button starte that you did sanded the connection inside push button but the push button starter is under the hood. Not under the dashboard because the push button is not fancy enough to be vintage push button Starte.
@gabrielv.4358
2 жыл бұрын
29:11 Nice sound!!!
@swanie_6448
2 жыл бұрын
I thought for sure that the motors was going to need to be torn down... You have way more patience than I do... Keep on, keeping on...!! Cheers...!! Ken
@jimcrichton8028
2 жыл бұрын
Great fun watching that engine being encouraged back to life. Hoping we see some of your new workshop build when it happens.
@painterspremiermore3235
2 жыл бұрын
I love these videos! I'm excited to see the upcoming garage! You're going to be rolling in KZitem $$ soon. Very excited to see you & your channel grow. Ps, I loved how you said, "when a friend stops by to talk, you talk"
@palmlimit9297
2 жыл бұрын
That’s officially the toughest starter I’ve ever seen or heard tell of😉🤣😎
@ThisNThatGarage
2 жыл бұрын
Wasn't much compression so it wasn't working very hard.
@yoshinoyajones8924
2 жыл бұрын
FINALLY, someone uses Evaporust to fix somethin!! I use that stuff all the time and every restore video I see is more like a replace video. Any hoo good on yah!!
@robertbrady3027
Жыл бұрын
I enjoyed that it brought back so many things I'd used do when I was young.
@BANGDANGOW45
2 жыл бұрын
The pics of what it can be made into looks badass. Can't say I've seen one
@oscarresendez4564
2 жыл бұрын
I also love the front ( REAR.)....bumper ........💯💯
@philiptaylor3533
2 жыл бұрын
How can you not enjoy this content if you are a petrol head , anything with a motor and learning a few trix , cool .
@gashouse2738
2 жыл бұрын
11:50 I love this place it reminds me of my childhood
@arthurhudgens8213
2 жыл бұрын
Good ole truck ye got there.the more you drive it the better itl run. Good simple durable trucks congratulations on getting it going .Good job man👍👍👍👍👍
@testy518
Жыл бұрын
I think what you really want is a new truck that looks like an old truck!🤣
@bill8by5
Жыл бұрын
At 1:20+, noticed the plug wire for #6 was dangling - hence a miss. Probably what is causing that backfire. Great old truck!! Keep 'em coming!!
@DAPwny
2 жыл бұрын
Love them old truck they built America.
@todddenio3200
2 жыл бұрын
I would have to look up the breakdown of it but the easiest way to tell the size of the engine on those old International straight 6 engines is by the coordinating color designation. If the engine was for example painted red there would also be a casting in the side of the block that would say Red Diamond, if it was painted green it would have the words Green Diamond cast into the side of the block. They had several Diamond color engine series.
@chipps1066
2 жыл бұрын
Those engines were flatheads,I'm not sure this is an International engine in this truck.
@todddenio3200
2 жыл бұрын
@@chipps1066 they continued to use those designations even on the overhead valve inline 6 cylinders into the 60’s.
@rocknative70
Жыл бұрын
That 1950 would have come (new) with an SD 220 or SD 240 cu in. SD = Silver Diamond
@SedatedByLife
2 жыл бұрын
The things I would do if I hit the lottery.... I love these old trucks. I remember my granddad driving em for his business when I was a kid (much like you). My dream has been to get my hands on some oldies and fix them up. So much fun.
@franzicehouse4682
2 жыл бұрын
Hey, when are you going to build your New Shop? I enjoy watching you work on Junkers and you always make them run.
@ThisNThatGarage
2 жыл бұрын
Hopefully this month sometime.
@meruliouslacrimens5154
2 жыл бұрын
So the starter works, its just everything else that needs replacing. My brother-in-law and i rewired an old motor and the only cable he had for the wiring loom was green, so every single cable got replaced with lovely new perfect for the job green wire. It all worked perfectly, but heaven help whoever had it later, i mean as i said it all worked, but you would have no clue as to what was going where.
@johnelliott7375
2 жыл бұрын
Glad you got that old history like the cans and flares, we had to use that stuff once upon a time.
@markduncan6690
2 жыл бұрын
Full points for Dogedness! Your right! Several times there was signs of life, stay the course!
@brianhayes7618
2 жыл бұрын
I understand about wanting a shop I too have worked on vehicles in a gravel driveway in the grass having to deal with fire ants and lost bolts and nuts. Makes appreciate the concrete floor in my garage. Enjoy your down home approach to auto repair
@craigbowley6783
2 жыл бұрын
I used to run the truck slab at a tire place and had to fix and mount and all the fun in between. Even had a few blow up on me! WHOOO!!! scared the soul outta me! And couldn't hear anything for 3 days😂
@daveallen8824
2 жыл бұрын
That open valve is where all the fire is coming from when you get it running.
@theodoredugranrut8201
Жыл бұрын
Thanks Chad, you both put in a good fight. We like your ideas on where you want to go with it. Central California watching
@rickyharris5797
2 жыл бұрын
Wow Chad. Good job getting that old truck running would have been nice to see you fighting steering
@UCs6ktlulE5BEeb3vBBOu6DQ
2 жыл бұрын
that starter was a genuine trooper
@jessestout8646
Жыл бұрын
You do good electrical work, Mr. This N That Garage!
@markduncan6690
Жыл бұрын
That was one Dangerous Passage Chad!
@abrdds
2 жыл бұрын
I love your channel... no nonsense repairs that I can follow... thanks... it won’t fit in the basement, will it?😂✊🏾👍🏾... I actually closed my eyes when it came out of the hole and bumped the parked tractor... whew...
@ThisNThatGarage
2 жыл бұрын
It'll fit in pieces!
@sparkybuddylove
Жыл бұрын
Really enjoy your channel keep up the great work. You had me hooked to your channel ever since that video with all the cows 🐄. Great sense of humor.
@michaelolsen2348
2 жыл бұрын
I like when you said you can't get parts worth a crap anymore. That's true. I think they do that on purpose so there's fewer of these old vehicles on the road. It's such a shame. Some people (like me) depend on these old vehicles to get them around. They're all I can afford to buy, and the only type I know how to drive. These cars with a radio knob as a shifter is ridiculous. Last I rented a car I had to ask how the hell do I shift it? There's no shifter! Then he pointed to what looked like a radio volume knob. I just said you gotta be kidding me? That......is a BAD idea. It was right below the radio knob too! Lol. When you tried starting it, and it seemed like she wanted to, I was trying to will it to start. Lol. Like come on girl! 😄
@billdyke9745
9 ай бұрын
Dang! 7 minutes in I remember this one... What the heck, I'll watch it again... 🇬🇧👍
@KiwiStag74
2 жыл бұрын
Mate - that was epic! Thoroughly enjoyed it from start to finish, although I do hope the old fella was ok - maybe just a bit shook up - after Ol' Betsy swung her nose around so fast after pulling her out the trees and tried to do him in. Man, she was stuck deep in the ground too! I was sitting here, willing the engine to fire as well - heard her pick a cylinder up stronger after she first ran for a few seconds, but it didn't help much. That stuck valve on number 4 - I have only ever seen one other engine let a valve go that quick after sitting for many years (under a tarp in a carport) and that was a 948cc A-series Austin engine - under a quarter of the size of the one in the front of that beast! When you got all six running, she ran rather well apart from the occasional backfiring through the carb (timing too far advanced maybe? General blow-by shenanigans? I don't know either....)......but the best bit for me was hearing the gears in the crashbox. Haven't heard a crashbox whine in about 40 years now - since Dad sold his '48 Ford Bonus truck. Boy did I love riding in that thing - from its flathead V8 sound to the musical whines in that gearbox and looking out over that great long hood, she was pure magic. Will be interesting to see this truck's journey when you get started on the mods! All the best
@ihatemashpotatoes
2 жыл бұрын
Dude you deserve a reward lol 🏅🏆
@denislandry7577
2 жыл бұрын
Nice ! Lots of work but got it running and moving , bonus
@mike.4277
2 жыл бұрын
Great awesome video!! I love watching old engines come back life!! 😎👍
@JRRott-mj5jq
10 ай бұрын
Hey brother that’s a sweet old truck hope you restore it up love to see it. Please keep us in the loop Appreciate ya brother
@thomasputnam4491
2 жыл бұрын
I been a mechanic for over 50 years it would fire right up with starting fluid and save the starter
@ThisNThatGarage
2 жыл бұрын
How's it gonna fire without compression?
@Staygoldfarms
2 жыл бұрын
This was one of the most educational videos you’ve done. How you built that compression was impressive. I’ve learned so much from you. Man I enjoy your videos. Thank you my friend.
@abrahambreban2793
2 жыл бұрын
Ooh rah simper Fi . Outstanding job you never gave up !! Got to give it go you you re not a quitter and that deserves a big OOH RAH SIMPER FI !
@richardearthranger1060
2 жыл бұрын
Reminds me of the deuce and a half ton army trucks, they didn't have no power steering.
Пікірлер: 755