God I love the sound of those old FEs. They sound like a V8 should sound! I have all the respect in the world for Chevy and Mopar but man the roar of those old Ford big blocks is pure ear candy.
@davidpowell3347
2 жыл бұрын
Nostalgia for the old "67 school buses with that engine. Modern school children would probably be afraid of the sound. As a 15 year old kid in one of those buses with the Forest Ranger,the Driver and myself at the pullout on top of Woodstock Mountain. (Near the hang glider launch and the Woodstock Observation Tower. That bus sounded something like that pulling up from Detrick Va. with about 30 kids and their camping stuff up to the Little Fort Recreation Area where we spent a night,but as sort of "teacher's pet" I got the full ride all the way to the top.
@deansettimi4570
7 жыл бұрын
Best parts: 0:54 2:13 5:06
@dorianfulton7168
3 жыл бұрын
Just running through the gears leaving the car wash was enough to make me smile.
@williamlane9140
6 жыл бұрын
Dude! When you do the burnout and wind it up, it sounds exactly like the mustang in "bullet". Freakin awesome!!!
@rdmccun
5 жыл бұрын
It sounds AMAZING!
@wyattdaulton7669
3 жыл бұрын
its cause the motor in the bullet car is a 390
@jp360ford2
3 жыл бұрын
It should, both are a 390
@georgemicheal9036
7 жыл бұрын
I'm a Chevy man but I love them 390s I don't think I've ever seen one that didn't have the tourqe
@danielcrymes8848
5 жыл бұрын
Nothing sounds like the 390. I have two of them. Enjoyed the video
@bloodruststaples
7 жыл бұрын
This thing sounds sweet! Awesome truck!
@damonrice8469
7 жыл бұрын
I see you lettin that 390 eat!!! Ole FE sounds good when she gets up in her power ban!!!
@TwinStickFilms
3 жыл бұрын
Something about an FE Growl that no other V8 has that sounds awesome
@jpaddock219
9 жыл бұрын
i have a 65 f100 with the 390FE engine, Flowmaster exhaust, edelbrock racing headers.... Pure badass.... Composite Track Tires adds a nice touch.
@chasecraiger1046
5 жыл бұрын
this makes my soul happy
@nikitis13
2 жыл бұрын
That sounds GLORIOUS.
@cringeavenger237
4 жыл бұрын
I'm in the middle of swapping a 390 into my 1984 shortbed 2wd after buying an almost identical parts truck the same model year with an engine from a 68 Mercury Cougar. All I can say at the moment is that there is truly no word good enough to describe how excited I am right now 😂😂
@curtmaster3001
9 жыл бұрын
Sounds like mine when it's uncorked. I run headman long tube headers, 2.5 inch pipes into magnaflow mufflers. It's got a 650 4 brl and a small cam. It's loud as hell when your in the throttle but pretty tame at idle. Yours sounds great though
@SuperCrudedude
9 жыл бұрын
Great angle sounds great too.
@bentboybbz
5 жыл бұрын
All this time since the first watch and i still come watch this video again every so often.
@R.P.M._Home_Videos
5 жыл бұрын
Unfortunately shes hurt pretty bad right now. I'm in the process of putting together a new setup for her.
@bentboybbz
5 жыл бұрын
@@R.P.M._Home_Videos Thats no good im sure she will come out better than before. Matter of fact i will sub so i can see if you decide to share. Thanks for the video aswell.
@R.P.M._Home_Videos
5 жыл бұрын
Going with a small block this time. Figure I'd try out each of the Ford families before I decided on a permanent fix.
@bentboybbz
5 жыл бұрын
Awesome. I hope it turns out not well but excellent and share another video with us when you are ready. 👌✌
@Bbbbad724
3 ай бұрын
@@R.P.M._Home_VideosC’ mon man do another 390or even a 410.
@crypticracerx
10 жыл бұрын
Watched this a dozen times now. Sound of beauty. What's done to the motor? What's the exhaust? Please post more thing sounds great!
@s46d45m17
8 жыл бұрын
I love the sound of the 390 doing the burnout, I had one in my 76 f 100 it was out of a 67 mustang GT it sounded just like this one
@MegaWireman
8 жыл бұрын
yeah, no kidding... I had a 1970 police interceptor 390 out of a junkyard that I beefed the old school way and put it in an old red '75 f150. No chrome, old paint, but you could just twitch the pedal and break 'em loose... had to be careful with it.. the engine ran real high rpm's like a 289 and had that sweet high-pitched crackle... ruined lots of tires with it... those were the days... there's a few beefing tricks unique to the pre-smog 390's that very few people know of... they can be beasts with the right work, no big bucks needed
@mississippiwrenches295
5 жыл бұрын
MegaWireMan What are some of the tricks cause I transplanted a 390 into my 1978 Ford F-150 I think he did some goodies to it the guy I bought it from but I just want to know the max I could squeeze out of it or those tricks you was talking about
@mississippiwrenches295
5 жыл бұрын
MegaWireman I got a 1978 with a 390 transplanted in there what are some of the beefing tricks you was talking about
@ballsmahony5030
5 жыл бұрын
I like to watch this video in the nightime.
@davehollamon1985
4 жыл бұрын
sounds great! thanks for the ride. wish i coulda seen trk. though.
@KnuckleHeadGarage27
8 жыл бұрын
Damn I love that sound that's one bad ass truck for sure that sound when u push on it
@obsessedwithcars219
2 жыл бұрын
Thank you
@mitchellschultz8958
10 жыл бұрын
Ahhhhh listen to that ole FE bark !!! I love it
@leonfochi4384
6 жыл бұрын
Perfect sound.
@roger423
Жыл бұрын
Sounds good
@bentboybbz
10 жыл бұрын
I had a 69 390 and loved that low end tq Didn't do anything special to it long tubes dual 3" high flow oil pump and it ran great. Sounded great too.
@bentboybbz
9 жыл бұрын
Truck ran great only problem I had out of the 390 was the oil pressure Guage line burning off on the long tube header. Which was my own fault. Mild cam 493 ft pnd tq wheel for the win lol. Much fun. My brother killed it in reverse up our steep driveway. Wide open no limiter.
@ceetwarrior
10 жыл бұрын
NICE man! Sounds awesome too
@gavinmccue581
9 жыл бұрын
Hey i know where that was at M highway in Sedalia Missouri pretty sure that was it if so I've seen this truck around its badass
@R.P.M._Home_Videos
9 жыл бұрын
Yep, that be the place.
@WildDiamond07
3 жыл бұрын
You should drive this truck with all five gears at top speed.
@brandonpelt4948
2 жыл бұрын
Cant wipe that smile off. Lol
@supervisedaddictionmudslin1238
8 жыл бұрын
sounds great I have the np435 and I'm curious if you had any fab work to do the swap mine is 4wd tho , is there any draw backs to the swap
@Blotrocks123
10 жыл бұрын
Bad ass truck man
@user-mc5lv2oz4f
6 жыл бұрын
m u s i c 🎶😍
@chrisg-JTX
2 жыл бұрын
heck yes!!!!!
@johnnymula2305
4 жыл бұрын
I have a 67 cougar 390 GT. Im installing the TKO 600 6 speed. Was wondering what your engine specs are. Love the lopey cam and sound of the exhaust at wot.
@mrbeaverstate
10 жыл бұрын
I suspect you just may have been speeding. God I miss my 65 I had in high school, ran nothing like this 60mph was topped.
@JBizzle822
3 ай бұрын
What cam did you put in this?
@blackmambajamal
6 жыл бұрын
That's a fucking sexy sound
@tomcorbett6477
7 ай бұрын
What was on this for an exhaust? I know you said glass packs, but long tubes? 3”? True duals or an h pipe? How’d they exit?
@R.P.M._Home_Videos
7 ай бұрын
Flowtech longtubes, dual 2-1/4 pipe, 3" tips straight out the rear bumper.
@georgemicheal9036
7 жыл бұрын
I've seen one twist a drive shaft in a 1973 Ford truck
@R.P.M._Home_Videos
6 жыл бұрын
First day after swapping on the Holley I bent a drive shaft and busted the yoke.
@DemoNationNorway
9 жыл бұрын
How many horsepower des this truck has? Nice v8 sound too
@R.P.M._Home_Videos
9 жыл бұрын
I'm not really sure. We don't have a dyno around here.
@DemoNationNorway
9 жыл бұрын
By the way, the car was awesome. The sound of a an old but healthy engine!
@DemoNationNorway
9 жыл бұрын
R.P.M. Home Videos I guess it isnt a stock 390 big block :P
@R.P.M._Home_Videos
9 жыл бұрын
Nope. Not quite. But who has time for stock?
@DemoNationNorway
9 жыл бұрын
Yes. Stock sucks
@mmatma31
9 жыл бұрын
What exhaust is on the truck it sounds really good
@bootyslayer_6967
5 жыл бұрын
THELAND SHARK glass packs I believe
@tractor2899
4 жыл бұрын
Yep 12"
@mikecorleone6797
5 жыл бұрын
Tried that once on my 70F100 with my old 390fe.. snapped the driveshaft in 2 places lol... mine has a 4 speed top loader, not sure which trans but runs like a raped ape.. love it but the gas mileage LOL
@ryanhunt881
3 жыл бұрын
If it’s the factory granny 4 speed with the really tall floor shifter it’s most likely an np435.
@JBizzle822
2 жыл бұрын
Or a borg Warner t-18
@thepompingreaser4834
4 жыл бұрын
got one of these in my 64' galaxie. what kind of mufflers you running in this?
@R.P.M._Home_Videos
4 жыл бұрын
12" Cherry Bomb glasspacks.
@bootyslayer_6967
5 жыл бұрын
I’d actually like some help or insight if you don’t mind, when I became 16 I got second vehicle ( keep in mind I don’t have my license yet for some reasons 😂 , 17 now) A automatic 1972 f100 Ranger Longbed with a 390fe in it and the man who owned it before me put glass packs on it, now I’m doing the breaks by myself but I live in the city and I’m curious to know if 68 parts can fit on 70s, I’m sure they can because ford you know, but also different years just have slightly different parts or bolt so I was looking for advice and nice truck too, I honestly would like to race you haha
@JBizzle822
2 жыл бұрын
Also 17 years old but they should fit. As long as you are not getting some specific parts like on 67 ford trucks. Me and my dad have a 67 f250 camper special and its nice old truck. Gotta fix some ignition issues. But as I was saying in 67, it was the first year of the gen 5 bumpside truck and the only year they made the door latches the way that they did among other stuff with the cab. They don't sell after market grilles either. As long as it is a different part other than the door latch system you probably should be fine. For cylinder heads: You can use 67 360FE heads on a 67 390Fe but you shouldn't use different years just cause they got updated as the years went on. Probably not a huge issue but try to get same year heads if you were replacing them or just order an aluminum edlebrock pair or something from summitracing or one of those places. I am not 100% sure what years they changed parts but if it is the same generation you should be good to go. I just realized this is a 2 year old post with no answer but here it is any way. Hope this helped sorry if it is a bad explanation. Good luck!
@jacemeister17
3 жыл бұрын
Would you mind telling me what input/output spline configuration you had to get?
@ignaciovioli4734
4 жыл бұрын
2:12 🤘🤘🤘🤘🤘🤘🤘🤘🤘
@bigheadedmartian
7 жыл бұрын
i am need for some information, i own a 1965 ford f100 with a 352 automatic my flex plex needs to be replaced my question is do these trucks come with a seperator plate? or another name for it is a flex plate cover. also can i put it together with out one? please contact me back. thank you
@brandondannys-menary3678
6 жыл бұрын
Do you think it has good power? I want to buy one this summer, what exhaust are you running?
@R.P.M._Home_Videos
5 жыл бұрын
Decent low end torque, not much pull up top. This was with flowtech longtubes, 2.5" exhaust, and 12" long glasspacks.
@the.1.and.only.DoughBoy
3 жыл бұрын
What can is in your truck?
@hectorjimenez806
7 жыл бұрын
what rear end?
@donsfade
9 жыл бұрын
what kind of transmission does it have ? trying to find a good one for my 65 f100
@justinblack2132
5 жыл бұрын
tremec tko 600 like the title says
@RodicaCatona
7 жыл бұрын
do 360 have this power to?
@wavyybased1820
5 жыл бұрын
Rodica Catona no
@chrisfarmer434
7 жыл бұрын
what's the exhaust setup? ?
@Franklin1783
10 жыл бұрын
what cam do you have in your truck
@rdmccun
5 жыл бұрын
How is this 390 set up if i may ask? sounds absolutely perfect!
@R.P.M._Home_Videos
5 жыл бұрын
Pretty simple setup. Street Dominator intake, Holley 770SA, C8 heads, little Comp Cam, Flowtech longtubes, 2.5" exhaust with 12" glasspacks.
@rdmccun
5 жыл бұрын
@@R.P.M._Home_Videos Thanks!
@rdmccun
2 жыл бұрын
@@R.P.M._Home_Videos still sounds perfect 2 years later lol!
@Terminxman
Жыл бұрын
@@R.P.M._Home_Videos this sounds way better than anything else with glasspacks that I’ve heard. I’m assuming the headers help the sound a lot, make it sound more “breathy”
@rickyhuerta1975
5 жыл бұрын
What kind of cam do you have in this truck
@R.P.M._Home_Videos
5 жыл бұрын
Little Comp. I want to say its a 268H. Its been a few years since I put it together.
@travisdiebal8428
3 жыл бұрын
Do you have the cam specs
@1boehm
8 жыл бұрын
is that 2 wd?
@johncontrerasmosquera6345
6 жыл бұрын
♡
@mmatma31
10 жыл бұрын
Thouse granny shifts lol jk sounds sick
@R.P.M._Home_Videos
9 жыл бұрын
Yeah first time on the TKO.
@MrBigChives
7 жыл бұрын
How do you like the tko on the 390? Adapter plate? How is the fuel economy with that tranny? Cammed too?
@dillonhughes751
5 жыл бұрын
Cam specs?
@hishok3332
4 жыл бұрын
15426378 love that sound
@alexcurry9273
4 жыл бұрын
Which bellhousing did you use to allow that tko600
@R.P.M._Home_Videos
4 жыл бұрын
Just used the stock 3 speed bell.
@alexcurry9273
4 жыл бұрын
@@R.P.M._Home_Videos gotcha, going to swap the 4 speed out of a highboy for either a tko 500 or 600.
@R.P.M._Home_Videos
4 жыл бұрын
If its a granny 4 speed the bell is a different depth than the toploaders.
@alexcurry9273
4 жыл бұрын
@@R.P.M._Home_Videos it is a granny, but they now make a tko 500/600 bellhousing for an FE, since the divorced transfer case I shouldnt have an issue. What is the towing capacity on one of these tkos?
@alexcurry9273
4 жыл бұрын
@@R.P.M._Home_Videos or would you recommend getting a top loader bellhousing?
@Slidpheonix
10 жыл бұрын
What kind of mufflers are you running ?
@R.P.M._Home_Videos
10 жыл бұрын
12" Cherry Bomb glasspacks.
@MrRandallinc
10 жыл бұрын
R3831Razor any headers ??
@R.P.M._Home_Videos
10 жыл бұрын
Cheap Flowtech longtubes.
@351Cpowered
10 жыл бұрын
What rear end gear ratio are you running in that truck?
@R.P.M._Home_Videos
10 жыл бұрын
Just the stock 3.25s. I'm actually setting up a new 31 spline 4.10 carrier right now since I finally got new wheels and ET Streets are on the way. Running the stock 28 splines with a spool is starting to make me a tad nervous lately.
@351Cpowered
10 жыл бұрын
R3831Razor I'm curios to see how you like it with the 4.10's in there. Probably gonna wake it up pretty good, you'll definitely need those ET Streets! And with the TKO in there, you'll be fine cruising at highway speeds. I have a 67 shortbed with a 351c and c6 3000 stall, and I just ordered some 4.56's to swap out with the stock 3.50's. Then the next line of business is a TKO 600. You'll have to put a video up when you get the new rear setup done. That's an awesome truck you have there.
@MrBigChives
7 жыл бұрын
Is there an adapter to mate a TKO600 to an FE motor? I didn't know that was possible
@351Cpowered
7 жыл бұрын
Yes, just search google for a "FE Bell housing for TKO/T5". Here's a link for one. americanpowertrain.com/i-8426614-bell-housing-for-ford-fe-360-390-427-428-to-ford-tko-t5.html
@R.P.M._Home_Videos
7 жыл бұрын
MrBigChives Yup. TKOs and the 3550 use the same 4bolt pattern as any factory toploader 3/4 speed. I'm running stock bellhousing and clutch z bar. Just added a spacer from Modern Driveline because I wanted to keep the longer input shaft. Very easy swap.
Пікірлер: 126