I don’t even do this type of work, but I can’t stop watching.
@johnterpack3940
3 жыл бұрын
Saved this for later, very excited to see it. I have a '59 T-Bird that needs a console. All the videos I can find are dudes basically covering 3/4 MDF in fiberglass and calling it good. Anxious to see how a legit craftsman does it.
@MakeItKustom
3 жыл бұрын
Hope you like it man! Lol I’m a terrible wood worker
@frankavellino6659
3 жыл бұрын
It came out awesome. wish I had a Jimmy.
@MakeItKustom
3 жыл бұрын
They are really cool trucks getting hard to come by now
@stricnine69
3 жыл бұрын
Its funny to me how humble you are when its obvious to all of us how badass your work is. Its also refreshing to me that you never stop smiling. A true artist at work.
@myretirementlife8731
3 жыл бұрын
I was thinking the same thing. It makes you want to watch his videos.
@MakeItKustom
3 жыл бұрын
Thanks a lot man I’m just really passionate about metalwork and love learning and sharing this comment really made my day
@jamesmcnamara7484
3 жыл бұрын
Truth
@jimwhalen6769
3 жыл бұрын
So very true!!
@steblovsky2728
Жыл бұрын
@@myretirementlife8731😢😢😮😮😮😮😮😮😢😮😮
@jrw6868
2 жыл бұрын
My favorite feature is the fact that you made the cup holder removable. Form AND function..
@wayneparks5601
3 жыл бұрын
Dang bud! That looks real clean, I like how even though you had some time in the first piece where the phone goes that you scraped it and made the piece it needed! Definitely one of my favorite channels!
@MakeItKustom
3 жыл бұрын
Thanks man glad to hear it! Nobody likes to go backwards with sometimes it’s needed
@adambergendorff2702
2 жыл бұрын
absolutely awesome, I love seeing stuff made out of sheet, rather than upholstered MDF!
@ODGColornChrome
3 жыл бұрын
That is awesome and your channel is great! Keep up the great work!
@MakeItKustom
3 жыл бұрын
Thanks a lot Darren!
@404_profile_not_found
2 жыл бұрын
The first thing I did with my English wheel was make a custom console with compound curves. It was so worthwhile
@siberianok
3 жыл бұрын
Just perfect!
@MakeItKustom
3 жыл бұрын
Thank you!
@terrysowter4798
2 жыл бұрын
I love the way the console cascades. Just as you said a water fall.
@2732hill
3 жыл бұрын
Great work! This kinda got me thinking about putting a console in my truck!
@MakeItKustom
3 жыл бұрын
Right on man hope you do!
@johnnygarrett6055
3 жыл бұрын
I really thought that console was very very hot well done . Any one should be proud to have that in their truck.
@MakeItKustom
3 жыл бұрын
Thanks you very much Johnny 👊
@craighuffman5397
2 жыл бұрын
That is gorgeous! I'm slowly building a shop (hobby) and really enjoy you take on how to fabricate things! So many great ideas and techniques, I cannot wait to try and hone my skills. Thank you for sharing!
@RADIOACTIVEMASCULINITY
2 жыл бұрын
Personally I like the open feel of the old trucks so I wouldn’t have put a console in at all for myself but you knocked this out of the park craftsmanship wise. Every element of this console is beautiful and well thought out!
@MakeItKustom
2 жыл бұрын
Thanks so much!
@paullangford2987
3 жыл бұрын
Fantastic work on the console. Just found your channel. Enjoying and learning from videos
@MakeItKustom
3 жыл бұрын
Welcome to the channel Paul thank you so much! Cheers
@skidrowoffroad
3 жыл бұрын
It's rare to see a properly designed and built custom console. Wow! Nice work. Most of the custom interiors I've seen, even in some high end, expensive builds, aren't half as nice as what you created. Very impressive.
@MakeItKustom
3 жыл бұрын
Thanks at lot man I’m a metaL man lol wouldn’t know where to begin with a wood one lol
@markcrawford8876
3 жыл бұрын
Your mind's eye is spot on, then you have the skill set to produce it. I think it checks every blank!
@MakeItKustom
3 жыл бұрын
I appreciate it mark! Thank you 🙏👊
@tobinthomas8401
2 жыл бұрын
Beyond your talents with metal and awesome attitude, anyone who plays Bill Withers in the Shop is number one in my book!
@MakeItKustom
2 жыл бұрын
🤣🤣🤣
@tobinthomas8401
2 жыл бұрын
@@MakeItKustom Yeah man! I heard "Kissing my Love" in the background and thought, I know this tune! I covered it in a Blues/Funk band I was in a few years back. That song KILLS! Gotta have great music if you're gonna get a job done. Cheers!
@TITOGRASA
2 жыл бұрын
Besst job ever... my son...You are very talented....Definitely one of my favorite ...
@raptors3164
2 жыл бұрын
Young man, you are a beast in your profession. The console came out sweet looking for sure. Excellent build and video, thank you for sharing. 👍👍👍👍👍
@michaelmarquette3137
3 жыл бұрын
Your work is 2 Nd to none I love how you worked in every bit of the original lid if you want custom it isn’t cheap it turned out beautiful
@MakeItKustom
3 жыл бұрын
Thank you so much! That’s exactly what I’m going for. Some guys get it and some guys don’t
@johnnymartines2118
3 жыл бұрын
Got a factory look. Good change on the front pocket Made it flow better. Very cool!
@MakeItKustom
3 жыл бұрын
Thanks Johnny I think so too!
@tomhubbard353
2 жыл бұрын
Why is this my favorite video from you? Because that 71 Jimmy is damn near a twin to my 72 Jimmy! I have owned it since 1989 and will always own it! Same Elk horn green paint that I love! I am looking forward to building it in the next couple years, need to finish another project or two first....Would love to see the console in paint, it looks damn good.
@MakeItKustom
2 жыл бұрын
Thanks a lot Tom! I love the green on these two. There was a older kid in my high school that had this exact truck. Always thought he was so cool
@nboldrini
2 жыл бұрын
Very impressive workmanship ingenuity and artistry!
@dannygeouge8459
3 жыл бұрын
Very inspiring, taught me a lot even if teaching wasn't one of your thoughts!! Beautiful console!!!!!
@MakeItKustom
3 жыл бұрын
I learned by watching as well so I’m glad that you learned something from it! Thanks for watching Danny
@laurensmith1828
8 ай бұрын
Awesome work. Love the design . The final mods were the icing on the cake!
@krisschwennsen4206
2 жыл бұрын
Loved the time lapse music in the part 2 time lapses!
@jnkellogg737
2 жыл бұрын
Loved the look. I wish I had the skills and tools do that for my 84 suburban.
@briang1247
Жыл бұрын
I think the console turned out perfect very good job
@roberthaynes4695
3 жыл бұрын
I loved it! I want one for my 67' step side. Very nice and unique.
@MakeItKustom
3 жыл бұрын
Glad you dig it man thanks!
@007cyklone
2 жыл бұрын
Build as you go is always the best... usually a basic idea then evolve from there... cheers
@ccameron9398
2 жыл бұрын
Just found this video from a few months back. You have a great eye for detail. Fabulous work!! I love the videos!
@BANDITRCN28
Жыл бұрын
Great job and very informative on how you did most of it! Didn't see anything on the rear cup holders The whole time you were building this I was thinking that you should do something for the passengers in back for cup holders as well with. I like the idea you used of getting the form of it first then building in the function of it!
@jimmymccracken9702
3 жыл бұрын
You are talented its an awesome design I like how you use a wire frame I'm 80 been a welder fabricator for 60 yrs at lease when you live on a farm you have to make due you fix what ever brakes you didn't go to town and buy another, we didn't have the money anyway. I built the 1st stainless steel monkey seats that when in space etc etc. Still build old cars, right now I just bought a 1947 Ford 4 dr with an stock flathead (stuck) I was 6 yrs old when it was built. And 1931 model A pickup 32 frame 327 with 3-2s won't stop till I drop keep up that great talent, I can't wait for the next video. You really excel at explaining your process. I'd like to buy one of the circle arch mechanical drawing tool you use to do the layouts, put a link below your next video please, what else can I say you can see the extra pride in each project.
@MakeItKustom
3 жыл бұрын
Right on man! It’s so cool you I’ve seen it all and are building cool cars still! Thank you so much Jimmy! Here’s the link! www.mittlerbros.com/mittler-bros/layout-tools.html
@ericdolan2130
3 жыл бұрын
I love the design, and the fact that you did leave some O.E. components incorporated. Makes people look at it and go "wait a second..." The cup holder is great too. Why reinvent the wheel. They have great function, a built in drain, and are adjustable in one fell swoop. Now I have to go out and do one for my Transit 250 since it doesn't have one, I bought a bead roller a while back, and I really could use it to tidy up the cab.......like I don't have enough to do. Keep it up, great content and presentation.
@MakeItKustom
3 жыл бұрын
Thanks a lot Eric I appreciate you and your well thought out comments! The feedback is great. I know what you mean like you don’t have enough to do lol there isn’t enough hours in the day but we keep plugging away! Thanks again cheers
@stewartlemon5702
2 жыл бұрын
You are a very talented fabricator.
@pedroratti4582
3 жыл бұрын
I really love when people can be proud of his work. It makes you happy. But not only you, everyone seeing your work feels happy too.
@MakeItKustom
3 жыл бұрын
Thanks Pedro!
@kacperbromberg8148
3 жыл бұрын
CAD really got me. I enjoy your builds a lot
@MakeItKustom
3 жыл бұрын
Ha ha ha it makes so much sense it’s almost too perfect
@mattb.5103
3 жыл бұрын
That is one great console. Makes me want to try one myself. Really dig the pocket. One thing that'd be neat is to add a recessed wireless charger in the pocket.
@MakeItKustom
3 жыл бұрын
Yeah this was something that I spoke about with the customer as another person suggested it while we were building it but I don’t remember why we decided against it. Seems like it would’ve been a nice touch
@ccrenovatorsllc732
2 жыл бұрын
WOW That was amazing great craftsmanship
@teevarley
2 жыл бұрын
That’s amazing! What a wizard!
@lesmuelle4479
2 жыл бұрын
Sweet. Very Sweet. Needing something like that for my 1975 Chevy Scottsdale Square body crew cab pickup with a bench seat
@rodz7910
3 жыл бұрын
That was some sick ass work, I'm blown away!!! You have some serious talent.
@MakeItKustom
3 жыл бұрын
Thanks so much!
@bobsadogtoo
2 жыл бұрын
I like your how to videos and really enjoyed seeing a full project video
@paulnewton943
2 жыл бұрын
Really nice work mate. Your smile at the end tells the storey. My only complaint is the fast forward means the end is to soon. Brilliant!
@califuturist
2 жыл бұрын
Hollywood Swinging?!! Kool.
@marca5883
Жыл бұрын
True skill dude💚🇬🇧🌱 not sure the vehicle deserved such fine workmanship...
@royosborn7869
2 жыл бұрын
That was truly fun to watch - great job --- really liked your attention to detail.
@JunkMikesWorld
3 жыл бұрын
That is OUTSTANDING!!!!
@MakeItKustom
3 жыл бұрын
Thank you!👊😆
@nealandrus8627
2 жыл бұрын
I am enjoying learning from you ... keep up the good work ..I will be taking this knowledge into my current build. Thank you !
@staccio80
3 жыл бұрын
Love it!well designed and made, very classy use the original lid👍🏻👍🏻👍🏻👏🏻
@MakeItKustom
3 жыл бұрын
Thank you so much I’m glad that you like the design as much as I do!
@gdm1103
Жыл бұрын
Holy Crap that was beautiful.....keep on pushing the envelopes.
@markdelplanche6478
3 жыл бұрын
Absolutely amazing build. The craftsmanship rival anything I have seen. The engineering is impeccable. The design blends very well with the original body lines. You sir are a true master.
@MakeItKustom
3 жыл бұрын
Wow mark thanks for the high praise! It’s nice when a plan comes together. There’s a fine line between nailing it and missing the mark with these things hahaha
@greatdaneacdc
3 жыл бұрын
Totally awesome! Made to go off road ! Worth the hours
@MakeItKustom
3 жыл бұрын
Thanks man glad you think so too!
@MIKEH.777
3 жыл бұрын
My man you are an fantastic artist, that center console is second to NONE,you did a great job on it.You're amazing at what you do and I'm so thankful that you share your skills with us (me). I can't wait to see what you do next ,when are you going to section and channel the Caddy, I would love to see more work done on that. Any stuff you do is great though it's all a learning experience to me. Keep up the great work and God Bless you and your family. 🔥💯💪🏼👍👍🙏🙏✌
@MakeItKustom
3 жыл бұрын
Thank you so much Mike! I’m glad that you enjoyed the channel so far! I really do want to get back on to Kristina‘s Cadillac build. We’ve been very busy with KZitem as well as preparing to move our shop so as soon as possible we will be returning to the build videos
@reneprovencher8395
2 жыл бұрын
Holy pop brother. That was awesome. I have a 69 corvette that needs a better dash. Corvette companies that do aftermarket make trash. Nothing fits, I’ve gone through 3 dash pads, holes don’t match. I need even at my age to do s wire molding than put in a real small glove box, be able to work on the gauges correctly! Uggg nice job brother!
@DustyMacsGarage
3 жыл бұрын
That is sickkkkk!!!!!!!!! You make it look easy sir!!
@MakeItKustom
3 жыл бұрын
The beauty of cameras lol thanks man it was a struggle
@RhumRunner41
2 жыл бұрын
Beautiful work! Love the attention to details such as the screw dimples. I know it’s too late but if I may make one suggestion, use a silicone rubber strip with a slot to fill the empty space at the shifter; it will help prevent stuff from falling inside the console.
@jimwhalen6769
3 жыл бұрын
Great work! Now I need to build one for my custom Jeep!
@MakeItKustom
3 жыл бұрын
Yeah you do man! Hope you have as much fun as I did
@davidwhite9906
3 жыл бұрын
Looks killer!!!
@MakeItKustom
3 жыл бұрын
Glad you like it!
@KotheJ1
2 жыл бұрын
Looks awesome and fits with the original lines great. Thank you for sharing your knowledge, and skill. Now it’s time to find some scrap and practice, practice, practice.
@hustlinghard8081
3 жыл бұрын
That console is bad a$$!! Your channel is blowing up and you deserve every bit of it. You are one of the few true educational type fab channels that actually teaches the viewers instead of just having us watch what you are doing.
@MakeItKustom
3 жыл бұрын
Thanks so much man that’s exactly what we’re going for we were so blessed to have experienced such growth so far and will be continuing to try and better ourselves and our videos. This is home now
@davidmotoman4956
2 жыл бұрын
You can see the work that has gone into it. Specially Great Job you have achieved indeed. Love your Work
@miguelcancian4562
3 жыл бұрын
Nice man! Can you show in a video how you make the molding machine?
@MakeItKustom
3 жыл бұрын
Yes if it’s the bead roller you’re talking about I’m gonna build one in the future!
@chrispound4759
2 жыл бұрын
Absolutely love it. The console is so under rated. If you are going to take a rig to the next level this is where it’s at. Amazing how easy you make this look. Love you style my friend.
@fredflintstone245
2 жыл бұрын
Wow bud you have some super talent with metal and to make it an even better channel you seem like a very decent, likeable, genuine lad and you have a unique style of delivering and explaining what you are doing and your thought process and I really enjoy your videos. Only thing is I am going to run out of videos soon, I've been binge watching them since I found this channel. You have a big future with what is clear something you love and you have inspired me to look into doing some custom sheet metal work like bead rolling to make custom panels and that sort of thing. I am a mechanic by trade and I am working on building a 72 Holden Monaro coupe down here in Australia and id love to incorporate some real custom one off pieces into my build so thanks mate I really love what you are doing here so just keep doing what you are doing it is something really special i believe.
@MakeItKustom
2 жыл бұрын
So much for the support Fred! I’ll never stop doing this I’m so grateful that I can work with my wife and work with my passion
@RGVJ21
2 жыл бұрын
Mate that is a fantastic job, well done.
@chriskemp2546
2 жыл бұрын
Awesome work! Has given me some good ideas for my own car
@scullywaggg2933
3 жыл бұрын
That was an awesome job and really trick I really enjoy watching you make stuff and I've used some of the things I've seen in my little project
@MakeItKustom
3 жыл бұрын
Awesome man glad to hear it! Thanks man !
@123suzukisamurai
2 жыл бұрын
Totally awesome. Excellent
@starchiefrussell4703
3 жыл бұрын
That console looks sweet. I'm pleased you had a change of heart regarding the phone bay mimicking the rear uplift sweep, as it really looks like a factory design. Well done!
@MakeItKustom
3 жыл бұрын
Thanks man! Yea sometimes you gotta back step as much as it feels like a waste, it’s a must for the finish 🙏
@erinneal8285
2 жыл бұрын
Well done looks great
@ulfhense5900
3 жыл бұрын
fantastic job!
@MakeItKustom
3 жыл бұрын
Thank you!
@Kaefer-Kult-com
3 жыл бұрын
A piece of art!
@MakeItKustom
3 жыл бұрын
Thank you!
@kennethcarver9687
3 жыл бұрын
All I can say is "WOW," great work🏆
@MakeItKustom
3 жыл бұрын
Thanks man!
@adman6380
3 жыл бұрын
Looks amazing, well done
@MakeItKustom
3 жыл бұрын
Thanks !
@Bart-ut7cn
3 жыл бұрын
Nice design and well fabricated. Keep it up!
@MakeItKustom
3 жыл бұрын
Thanks man will do!
@jbrown8274
3 жыл бұрын
That is pretty tight, great job
@MakeItKustom
3 жыл бұрын
Thanks man !
@ravinperera4255
3 жыл бұрын
Beautiful work!
@MakeItKustom
3 жыл бұрын
Thank you!
@jamesgraham2437
3 жыл бұрын
I makes console s I thought it was very professional good quality very creative work and idealistic concept
@MakeItKustom
3 жыл бұрын
Thanks a lot James!
@Ali-zz8mc
3 жыл бұрын
Good job ❤ don't give up ❤❤❤❤❤
@MakeItKustom
3 жыл бұрын
Thanks a lot Ali!👊👊👊
@dolmat21093
2 жыл бұрын
Awesome work!!!!
@tonypane6682
3 жыл бұрын
Mad skills! Looks sweet. 😎
@MakeItKustom
3 жыл бұрын
Thanks Tony!
@GREGSGUNSONLINE
Жыл бұрын
awesome console !!!!!
@littlecesar003
2 жыл бұрын
Great console, good video.
@stephenzwemer2905
3 жыл бұрын
Awesome design The console is a bit high for serious off road playing around, but I doubt that a high end resto / custom build like this is going to see much dirt. Excellent design and fab skills
@daos3300
3 жыл бұрын
sub woofer, cup holders.. might occasionally get driven into a field at a festival. great build though.
@MakeItKustom
3 жыл бұрын
Ha ha yeah you’re right guys It’s not going to see much serious trail after this but definitely some camping and some light wheeling. Thanks a lot!
@DavidTorres-vy8zz
3 жыл бұрын
I am excited about finding your channel! I want to learn how to do that kind of metal fabrication.
@MakeItKustom
3 жыл бұрын
Right on! We will be doing lots of it here welcome to the channel!
@BigSlickRick75
3 жыл бұрын
Fantastic job bro!
@MakeItKustom
3 жыл бұрын
Thanks man glad you like it!
@theissofkaltenbrun9043
2 жыл бұрын
Beautiful work as usual mate! Working on the fly I find really gets the creative juice flowing eh Keep up the awesome content
@billriley3347
3 жыл бұрын
Excellent work
@MakeItKustom
3 жыл бұрын
Thanks bill !
@chopper_1987_
3 жыл бұрын
It's fantastic fabrication 🤙 and awesome skills 😉
@MakeItKustom
3 жыл бұрын
Thanks man!
@jayburrough4308
2 жыл бұрын
That was awesome 😎👍
@toddbarksdale
3 жыл бұрын
That was slick, I just hope you put some sort of sound deadener in it after it was painted.
@MakeItKustom
3 жыл бұрын
Yeah it will be lined with sound deadener
@xozindustries7451
3 жыл бұрын
Console looks good
@MakeItKustom
3 жыл бұрын
Thank you!
@joecantrell7489
3 жыл бұрын
Sweet!! Looks great!!
@MakeItKustom
3 жыл бұрын
Text Roger!
@vincentlunsford1580
3 жыл бұрын
Amazing work and an amazing video
@MakeItKustom
3 жыл бұрын
Thanks Vincent!
@mrjroeder
3 жыл бұрын
That's frickin' cool! It's nice to see custom work that blends so well with the original design. I loved seeing the whole process. Keep up the good work!
@MakeItKustom
3 жыл бұрын
Thanks so much that’s what I was going for! I’m glad you agree
Пікірлер: 1,2 М.