NOTE : BMR control arms move the sway bar mount back 2". This has pros and cons: good news is the same diameter sway bar will now act stiffer on the car, but the bad is if you have a Panhard bar, your sway bar will not fit as the panhard bar is in the way now. So if you have a panhard bar back there, try a different brand control arm that uses OEM sway bar mount positions.. Ask me how found out.
@helio1993
3 ай бұрын
Hey man, what brand of control arms did you used to keep your panhard bar?
@ryanbeason6830
7 жыл бұрын
mine will be here friday! can't wait!
@richard_lerma_jr
7 жыл бұрын
Now that's what I'm talking about!!!!
@robvas
Жыл бұрын
Step one: install Rovos wheels on one side of the car, LMR wheels on the other other side!
@bh3278
4 жыл бұрын
Is it the same install for the double adjustable lowers as the single?
@THETOPGLOCK
Жыл бұрын
This might be a long shot because it is a 5yr old video but I have a question. For some reason I noticed on my 00GT the rear axle seems crooked. The measurement from wheel to quarter panel are different on each side. I don’t know how it’s possible but I may need adjustable LCA to bring it back in line.
@latemodelrestoration
Жыл бұрын
I would visually inspect all of the control arm bushings and the rear upper axle bushings. Rear lower control arms will have no effect on the side to side movement of the axle. -Landan
@u188292
4 жыл бұрын
So I just installed the upper and lower control arm now I get a weird squeaking noise why?
@SGTRacing
4 жыл бұрын
Ive read thats normal due to the bushings on them, someone wrote on one of the reviews.
@rcmelton0615
5 жыл бұрын
I know this is an older video. But my mustang is lowered quite a bit. So what would i have to do differently with the adjustable control arms from this video? Like adjustability wise???
@latemodelrestoration
5 жыл бұрын
These will help you correct pinion angle and adjust the center of gravity on a lowered mustang so you aren't tearing up u joints. They will also help the car handling wise and reduce wheel hop.
@rcmelton0615
5 жыл бұрын
Late Model Restoration oh ok! Thankyou!
@TurboTurdBurglar
5 жыл бұрын
Thought the polyurethane side is suppose to be on the body side
@latemodelrestoration
5 жыл бұрын
The correct orientation will be the poly bushing sise on the rear end and the spherical rod ends on the body side. Thank you again and please let us know if you anything else.
@Dirtbikeracing101
7 жыл бұрын
Who's cars do you guys always work on?
@latemodelrestoration
7 жыл бұрын
Hey Carter! We usually work on employee cars but when we do not have the car we need, we source local cars in the area.
@Dirtbikeracing101
7 жыл бұрын
Late Model Restoration Where's your shop located out of!!?
@latemodelrestoration
7 жыл бұрын
We are located in Waco,Texas. -Landan
@TheChazzMan
4 жыл бұрын
Great video thanks for the tips!!
@elilangford8526
Жыл бұрын
So I can’t get the sway bar to fit right after installing the new arms, and the bolts are super tight when I try to put the bolt through the new arm and it feels like I’m ruining something. Just wondering if I am missing something.
@latemodelrestoration
Жыл бұрын
What brand is the sway bar? If it was bolted to the factory rear lower control arms, then it will bolt to the BMR control arms. Unless, the BMR rear lower control arms weren't manufactured correctly. Send us some pictures of what's going on. -Landan lmr.com/contact
@elilangford8526
Жыл бұрын
@@latemodelrestoration I will get some for you but it will have to be tonight i am currently working but when I get them I can get them to you
@latemodelrestoration
Жыл бұрын
@@elilangford8526 That sounds great! We'll be closed tomorrow, 7/4/2023, but will continue our normal schedule on Wednesday 7/5/2023. Whenever you contact us, one of our customer care representatives will assist you. Thanks. -Landan
@elilangford8526
Жыл бұрын
@@latemodelrestoration hey I was going to let you know I got it on it was just super tight I had to get one side pretty lined up then push the sway bar inside the other control arm after one was in. Thanks for the help.
@latemodelrestoration
Жыл бұрын
@@elilangford8526 You're welcome. Glad you were able to get the sway bar installed. -Landan
@TheFLKA
7 жыл бұрын
Great vid! BMR FTW!
@tdejew
5 жыл бұрын
what spring isolators are you using ?, it looks like they are wedge shaped
@latemodelrestoration
5 жыл бұрын
Tom - The car in the video has a coil over setup. That is the reason for the tapered rear, lower isolator. -Landan
@edwingonzalez5116
5 жыл бұрын
Is there any warranty available on the control arms?
Пікірлер: 31