Good job. When I seen the video title i I remembered what a friend of my dad said to me with my first 124 . keep an extra set of belts mag pickup and a gal of water in the trunk along with a tool kit.
@ELDESTBuilds
4 жыл бұрын
The list of spare parts is long
@stevenfuchs2548
3 жыл бұрын
This is great, we have a 79 that I need to do some work to. Thanks for posting all these.
@ELDESTBuilds
3 жыл бұрын
Welcome, hope they help
@ToyKingWonder
3 жыл бұрын
I own 2 850s, a Brava and a 128sl. I just inherited a 124 which will be here next month. Checking out your videos--although the engine is similar to my Brava, nice to see someone else doing work. Since the car has sat for years, I will definitely do the timing belt before I try to get it running, that looked like it was a bit tough, and you had the engine out! I did the one on my 128SL and it was like changing a fan belt compared to what you had to do! Thank you for your straightforward, no BS, no nonsense videos.
@ELDESTBuilds
3 жыл бұрын
Definitely easier out of the car. The timing mark has one bolt and will move out of the way, so you don't have to pull the bottom pulley, unless you want to change the seal. Thanks for watching, enjoy your build. If you need 124 docs send me an email. Eldestbuilds@gmail.com
@mmorales1497
4 жыл бұрын
This video is so sick!! I’m about to throw the engine back in my ‘74 and having a resource like this is helpful
@ELDESTBuilds
4 жыл бұрын
Thanks, hope it helps.
@johnwayne7210
4 жыл бұрын
@@ELDESTBuilds Success! Dash cluster back to it's original state with LEDs. All except the lighting on the Volvo analogue clock but it works. Probably flatten my battery after a week. Great work Eldest! Sound deadening material is in, just have to put the interior back together. Cheers Trevor.
@ELDESTBuilds
4 жыл бұрын
Good job
@zekeanderson8304
4 жыл бұрын
I'm restoring a 1971 Fiat Spider. was sitting in a field for 10 years and in my brothers garage for 3 or 4.
@ELDESTBuilds
4 жыл бұрын
Excellent, may the wrench always turn in your favor.
@ericfurman4744
4 жыл бұрын
Thanks for uploading the video. I have a similar problem, I replaced the pickup, spark plugs, cap, rotor, and lines but now the car only starts if I keep the accelerator held to the floor and when it does run, it’s super rough and I can smell gasoline. I have an 81 spider FI if that helps. Thanks for all your uploads they really helped me when working on my car.
@ELDESTBuilds
4 жыл бұрын
Check setting on the timing. The FI models other issues. Here are some links I found. fiatspider.com/f15/viewtopic.php?t=7998 www.fiatspider.com/f15/viewtopic.php?t=31041 www.fiatspider.com/f15/viewtopic.php?t=8009&start=15
@dennisjump8655
2 жыл бұрын
Thanks for the carb nuts tip.
@ELDESTBuilds
2 жыл бұрын
Welcome
@letsride2057
5 ай бұрын
If you take an old bath towel and below the carb or dist and give it a bib, screws, bolts, clips, finger, it catches these items. I always have a mantra that I use as i am taking off hard to get fasteners " I you drop it, you die"
@ELDESTBuilds
5 ай бұрын
Good idea, thanks
@johnwayne7210
4 жыл бұрын
Ha, just saw the fiat vlog come up, omg "Fix it again Tony" I'll watch that one after a sleep as another 6 hr night shift with LEDs. Ha.
@ELDESTBuilds
4 жыл бұрын
40 year old parts
@Schlipperschlopper
3 жыл бұрын
Sadly from 2030 on all combustion cars including classics will be banned from public streets in entire EU and Scandinavia :-( In Germany the Green Peoples Party gave order to shorten fuel supply from 2025 on by reducing all conventional fuel stations to only one state operated central gas station per city or county. Now they even want to slow down all the gas pump outputs from 20 litre per minute to 2 litre per minute...From 2027 on in the EU certain car spare parts will be banned too....as exhaust systems, turbo chargers and even some engine and gearbox oils...California and New York will do the same from 2027 on.... So no investments should be done in oil burning cars any longer....They even created a new kind of crime here, called emissions and smoke crime.
@ELDESTBuilds
3 жыл бұрын
It'll be ok, a couple of Tesla motors and it will beat it's model anywhere in the world.
@BiggCliph
3 жыл бұрын
I have 1977 Spider I’m working on right now. I have to replace all of the wiring harness. Where did you find yours? Beautiful build btw!
@ELDESTBuilds
3 жыл бұрын
Sorry, the wiring harness is original. It was not too hacked by the owner. I just cleaned most of it and added what I needed. You might want to look at, www.painlessperformance.com/wc/10201 It's has all the wires marked where they go. I'm not aware of a complete wiring harness available. Midwest Bayless seams to have the most electrical components available. www.midwest-bayless.com/c-35-wiring_Fiat-124SC-0.aspx
@BiggCliph
3 жыл бұрын
@@ELDESTBuilds thank you so much, this is really helpful!
@ELDESTBuilds
3 жыл бұрын
You're welcome
@aweirdoh
6 ай бұрын
What would be the best way to fix it if it has jumped timing without having to take the whole thing apart
@ELDESTBuilds
6 ай бұрын
Jumped timing usually means the gears slipped out of sync with the timing belt. If that's your situation, you'll need to be looking at my timing belt removal and install videos. I have all the books in a Google drive folder. Send me an email eldestbuilds@gmail.com
@anthonynestor6982
2 жыл бұрын
Can you give me more things I should check on because I have done everything and I can’t get no spark at all it ran a year ago I did the pick up coil wires plugs and cleaned the cap but still nothing any ideas ?
@ELDESTBuilds
2 жыл бұрын
Try this one, finds a different problem. Need a voltmeter. kzitem.info/news/bejne/pmOEzKCli2KgiGU
@SieraStanton56
Жыл бұрын
I’ve got an 85, where do you order your parts from?
@ELDESTBuilds
Жыл бұрын
Vickauto.com is where I shop the most
@joelove4607
2 жыл бұрын
Hello sir, I love your videos. I have a 1982 fiat spider and am having a problem. It will start and run for 10 minutes and then shut off. It does this consistently. Then it will not crank for a couple of hours.I have replaced the ign coil module and checked the coil-it ohms at 11000 and replaced the condensor. I have tested the pickup coil and it has continuity and the wiring is not broken(like in your video) but I am thinking this may be still be the problem? any help would be appreciated. thanks, Joe
@ELDESTBuilds
2 жыл бұрын
Fuel injection?
@joelove4607
2 жыл бұрын
Yes it is fuel injection.
@ELDESTBuilds
2 жыл бұрын
Send me an email eldestbuilds@gmail.com I have a Google drive folder that has the fuel injection guide in it. If the car runs sometimes, ignition is probably not the problem. Most likely a hiccup with the injection.
@markbury141
2 жыл бұрын
Helpful video for non mechanics, white ign. Pickup wire should be secured so that it won't melt against exhaust manifold, beard and tattoos typical, Mark Bury.
@ELDESTBuilds
2 жыл бұрын
Thanks buddy
@tylervandeventer3710
4 жыл бұрын
Hey buddy, I just bought a 1978 Fiat 124 Spider and had a few questions! Anyway to contact you other than in the comments? Thanks!
@ELDESTBuilds
4 жыл бұрын
@Eldestbuilds@gmail.com
@erickfrench2768
2 жыл бұрын
I have a 81 fiat spider. Do you know where the fuel relay Is
@ELDESTBuilds
2 жыл бұрын
I don't know. Call Matt over at Vickauto.com, he's the man
@frantisekwachtl6763
3 жыл бұрын
Hi Eldest, please never turn the engine over the camshaft again. You put extreme strain on the belt and the Kevlar fibers tear in it. Then he likes to break unexpectedly. That's really bad advice to others. I recommend shifting to 4 or 5 speeds and depressing the car with the ignition off. One person can do it on a flat surface without any problems. I don't understand why you don't try a spark as the first diagnostic. I pull the power cord from the spool, use a spark plug or hold it with pliers to see if there is a spark. Then I move on. What are you measuring on that spool, please? Tension? If the ignition is switched on, the engine does not rotate, so you will always measure 12V on terminals 1 and 15! At the moment of rotation of the motor (distributor), 12V to 0V resp. ground. The primary and secondary windings are interconnected. You can measuring only Ohmic. The electricity in the car is probably not your forte. I'm sorry, maybe you're not offended. But some of your advice can harm another. I have and i like Fiat 124. I use google transaltor, have a nice day everyone. :-)
@ELDESTBuilds
3 жыл бұрын
Thanks, but it is running at the end of the video
@cccorvette
4 жыл бұрын
Couldn't you hear me telling you to hook up the coil wire?
Check do you have voltage to the coil when you switch to start. A test light would show it.
@ProjectileGrommet
3 жыл бұрын
Did this ever get resolved?
@ELDESTBuilds
3 жыл бұрын
The car in the video is running
@spamfremail
3 жыл бұрын
So instructive! Can I ask what carb you have here? Assume not the original 79 spec one?
@ELDESTBuilds
3 жыл бұрын
This one www.vickauto.com/FIAT-PARTS/FIAT-124/2000-and-131/Brava-Parts/Performance/32/36-DFEV-Carb-Conversion-Kit-Fiat-124/2000-SKU-30-0331
@spamfremail
3 жыл бұрын
@@ELDESTBuilds Thanks so much. Been looking at the exact same one here: www.dellorto.co.uk/shop/weber-carburettors-parts/weber-twin-barrel-carburettors/dfev-carburettors/weber-dfev-3236-carburettor-vw/ Your linkages look quite elaborate - hopefully I can get those too. Was it also easy to rig up the electric choke and does that work well for cold starts?
@ELDESTBuilds
3 жыл бұрын
Sorry I missed this one. There was a lead already for the choke. Yes, adjust the tension and plug it in. Works fine. The linkage is stock, just have to bend it a little to get it working. There are a few vids related to carb install and set up.
Пікірлер: 61