I really don’t know how I would do what I’m doing without your videos. Thank you many times over.
@ELDESTBuilds
3 жыл бұрын
Glad they helped. You are welcome.
@kentvdc
4 жыл бұрын
The American cars had a higher suspension than the European models due to regulations and I guess the arms just weren't big enough any more so they made them in USA that's my understanding.
@ELDESTBuilds
4 жыл бұрын
Because Americans are heavy
@francescomonteduro6344
3 жыл бұрын
did you need to remove the center console from the car to get the transmission out?
@ELDESTBuilds
3 жыл бұрын
I think you could drop it with the console in. Need too disconnect the shifter housing, boot and shiny handle to slide it through the rubber boot on the floor plate.
@francescomonteduro6344
3 жыл бұрын
@@ELDESTBuilds Thank you for the quick response, I have a 1980 Fiat spider, I have owned it for 30 years
@ELDESTBuilds
3 жыл бұрын
Maybe fast forward to the reinstall video for a better understanding of how to get it out and in.
@francescomonteduro6344
3 жыл бұрын
@@ELDESTBuilds ok, thank you.
@lanciabetacoupe
3 жыл бұрын
muy interesante., gracias
@ELDESTBuilds
3 жыл бұрын
de nada
@keithyoung7381
5 жыл бұрын
wish you didnt skip the important parts. how did you get the shifter off?
@ELDESTBuilds
5 жыл бұрын
The knob will unscrew. The shiny part of the lever is attached to the other part by a plastic clip. The clip is circular inside. If you look you can see it in there. Carefully pry it down with a screwdriver. There are grooves, you will see them. Then the long lever will slide off.
@keithyoung7381
5 жыл бұрын
@@ELDESTBuilds great, thank you
@ELDESTBuilds
4 жыл бұрын
@@keithyoung7381 Give me a week or so and I can get a video up on breaking down the shifter. Do you want me to take the shifter out of the transmission also?
@keithyoung7381
4 жыл бұрын
@@ELDESTBuilds no thats ok, thank you. Got it all figured out now. Transmission lost 5th gear. Looks like the unit was overhauled before. The synchro sleeve was installed backwards
@philthyanimal56
4 жыл бұрын
@@ELDESTBuilds you still got that video I'm trying to figure this out right now lol
@JD-vl5yh
5 жыл бұрын
Are you going to be rebuilding the Transmission it replacing it with a new one?
@ELDESTBuilds
5 жыл бұрын
Disassemble to replace seals and gaskets only. The car only has 43k and was running before it was parked. Spinning the trans thru the gears by hand, doesn't lead me to think there's an internal issue.
@JD-vl5yh
5 жыл бұрын
@@ELDESTBuilds very nice. Ours only had 53000 but hadn't been treated very nice, so it's getting replaced. Keep an eye out in the fluid for glitter. The original gl1 fluid is a must. The new stuff has chemicals in it that wear the soft metals away fast.
@ELDESTBuilds
4 жыл бұрын
J D, I see a question about shifting gears when the transmission was out, but I can't find it to answer directly. Yes, I could shift through the gears with the transmission on the bench. Hope this helps.
@timdoughty7459
2 жыл бұрын
"I'm not Italian, so I didn't engineer this d@mn thing," said every Fiat owner ever. (I mean, maybe except for the Italian ones.)
Пікірлер: 26