New project. Had no spark. After close inspection of the coils and wires, the wires rubbed down to bare wire and were shorting out. after wrapping with electrical tape. The motor started. Repaired the wires permanently after the video by cutting, stripping, soldering, heatshrink, and cover with wire sleeve to protect the wire from shorting out again. Carb and jets were soaked in seafoam top engine cleaner before the video and fuel pump was inspected and cleaned before the video. Motor starts right up now. Inspect your wire harness closely. The slightest opening will leak spark and cause problems. 👍
- Күн бұрын
1981 Evinrude 25 HP
- Рет қаралды 331
Пікірлер: 1